I had 3 Agents (A, B and C). For test purposes, I´ve installed a fourth one (D), but I didnt know that my license was up to 3 Agents only. So, the agent D was created with "Unauthorized with comment: Agent teamcityagentdev4 cannot be authorized because there is not enough licenses" status. Its understandable, but a weird thing happened to another Agent A, that was working well so far. The Agent A status changed to "Disconnected (Agent has unregistered)". Now, I got 2 questions:
1) How can I delete the Agent D ? There is no button "Remove agent" in Agent Summary tab in TC Web UI. I tried to disable this Agent in order to get that button, but its still missing.
2) How can I reconnect the Agent A ? I tried to restart the Agent windows service, but nothing happened.
I also searching in Team City documentation, but I didnt found anything about that.
You just need to stop Agent service on Agent D to get it removed from Agents tab.
Also, you might want to check Agent A's logs to figure out what happened. You can try restarting Agent A's service after stopping Agent D's service
Stop the agent service.
Now in the agents tab you can see that particular agent disconnected. Now a new option(button) appears 'Remove Agent'. Click that and your agent gets deleted/removed.
Related
I have requested a public ACM certificate and I have selected the DNS validation method. After requesting the certificate it went to Pending validation state. I have created a hosted zone in Route 53 with the same domain name which I have used for my certificate. After creating the certificate I got the option "Create record in Route 53". I have created the record in Route 53 with the CNAME and it displayed as " Success
The DNS record was written to your Route 53 hosted zone. It can take 30 minutes or longer for the changes to propagate and for AWS to validate the domain and issue the certificate.". But the status of the certificate is not getting changed and it is still in pending validation only. After some time the "Create record in Route 43" option is getting enabled again. I have tried the same process multiple times almost one day but the status is not getting changed. Can someone please help to fix the issue.
In the AWS Console (Web UI), on the Certificate Manager page,
Expand the certificate that is pending
Expand the table that has domain and validation status
Click the blue button that says "Create record in Route 53" (you can also do this manually)
Give it about 10 minutes
Or follow these instructions from AWS - Why is my AWS Certificate Manager (ACM) certificate DNS validation status still pending validation?
Having the same issue here and I found out that my problem is in the NS record in my domain. My mistake was I didn't update the Name Servers in my domain, what I did was the opposite. I updated the values of the NS record in R53 based on the NS on my domain then I realized that the right thing to do was to update your NS (Name Servers) of your domain to the values of the NS record in R53. Haha (english is not my native language btw).
Just make sure you have the correct Name Servers and correct CNAME suggested by ACM. I waited a day before and still Pending Validation, but when I fixed it it took only a few minutes for my certificate to be issued.
What I would do is:
Verify that the DNS returns what is expected.
For that you can use dig (Linux) or nslookup (Windows), or even better > https://www.digwebinterface.com
If you don't get what is expected, you need to reconfigure the DNS.
Once it is verified, wait a little bit (10 min to 2h I'd say).
Something to read while you wait:
https://docs.aws.amazon.com/acm/latest/userguide/acm-regions.html
https://docs.aws.amazon.com/acm/latest/userguide/dns-validation.html
https://aws.amazon.com/premiumsupport/knowledge-center/acm-certificate-pending-validation/
https://docs.aws.amazon.com/acm/latest/userguide/domain-ownership-validation.html
We from the the Swiss umbrella association for youth parliaments (DSJ) use TYPO3 as the backbone of our website. Next to TYPO3, we also use the CRM software hitobito, which allows us to create "Abos" with "mailing lists". However, this service is currently not working since Hitobito has recently changed its mail server. I have already changed the server addresses manually in our 365 Admin microsoft account and the changes have been verified by the Hitobito support.
This is where TYPO3 comes into play. The support staff from Hitobito suspects that the mail server configurations must also be changed in TYPO3. I, as a layman, have no clue where to make such changes, however. I was hoping you could help me out here. I believe the following information must be updated in the TYPO3 configuration:
*For the new mail server:
crm.dsj.ch IN MX 10 app.hitobito.ch.
For the outgoing mail server:
crm.dsj.ch 3600 IN TXT "v=spf1 a:mxout.appuio.ch -all*
The information you gave has nothing to do with TYPO3 but is part of the domain record. You should approach your domain registrar (seems to be https://www.visol.ch/ according to whois) with that.
The 1st one is to designate the mail server app.hitobito.ch for all incoming mail to recipients ...#crm.dsj.ch (so-called MX record).
And the 2nd one is to lower the spam level for outgoing mails from senders ...#crm.dsj.ch from the server mxout.appuio.ch (so-called SPF).
Is your webserver supposed to send mails, too? If so and you have problems with receiving these mails, I suggest to use the InstallTool's "test mail" function and send a mail to https://www.mail-tester.com/ - a great tool to identify spam-related problems.
I have created a URL monitor to check the availability of website.I kept all values as it is in monitor tab and added host( http://abcd.xyz.org ). I scheduled it for every 10 minutes in schedule tab. In Measure tab I put the Lower sever value of HostReachable measure to 0.
I created incident , added HostReachable measure and put its Aggregation to last value. Evaluation time frame is 1 minutes.In Action tab I put my email for notification.
Now after every 10 minutes I started getting email even I browsed the website and it's working fine. Couldn't understand if website loading fine then why incidents occurs.
Email message:
Violations
HostReachable: STG URL Monitor#abcd.xyz.org: Was 0.00 but should be higher than 0.00.
Latest logs given below:
2016-08-17 15:42:33 INFO [UrlMonitor#STG URL Monitor_0] Previous message was repeated 1 times.
2016-08-17 15:42:33 INFO [UrlMonitor#STG URL Monitor_0] Executing method: GET, URI: http://abcd.xyz.org:80/
Thanks
This could have to do with the evaluation timeframe of your Incident. If your monitor is scheduled to run every 10 minutes but your evaluation timeframe is 1 minute it means that you have 9 evaluations where there is "no data".
We typically recommend to align the monitor execution with the Incident. Can you give that a try?
Also - I typically chart these measures to see which values the monitor produces in which timeinterval. this is an easy visual verification check to make sure that e.g: the monitor works correctly and delivers data. Can you do that?
I also wanted to say that we have a very good Dynatrace Online Community and Discussion forum # http://answers.dynatrace.com. You might want to try to post future questions there as there are 100k+ Dynatrace users active on that community
Andi
I'm in IT support. We have two types of correspondence:
With final users. The usual external communication with them.
With service providers (DBA, etc) Internal communication that can't be seen for the requestors.
For the first one, we use the 'answer to requestor'.
For the service providers, we use a comment and send CC to the service provider. But when they reply, RT considers their reply as correspondence and execute the actions for the 'correspondence' condition.
Then, when i wanna customize the scrips, RT doesn't distinguish between the actions: an email to the user and a replay from the provider (internal CC) are both "on correspondence" for RT, and send them both to the requestor.
I don't realize how to configure RT for send 1 y 2 to different actions.
Have I configurated something wrong? Which must I consider?
Or must I use a custom user scrip?
Thanks a lot!
RT should do what you are expecting, which is send correspondence (replies) to the requestor and send comments only to staff. There are two areas to look at to sort out why this isn't happening:
1) By default, RT's notification scrips use the Cc role to add another requestor. If you want to add a "commenter," you want to use the AdminCc role rather than Cc. This is likely the problem.
2) If that doesn't fix it, make sure you have two email addresses set up, one for correspondence and one for comment, something like support#example.com (correspond address) and support-comment#example.com (comment address). Then make sure you have your /etc/aliases file set up to route correspond with --action correspond and comment with --action comment. An initial example is provided in step 10 in the RT README.
i've noticed that on LoLReplays webpage you can now stream live games via their program LoLRecorder. I found this code on their page
href="lrf://spectator spectator.eu.lol.riotgames.com 2nHvYdkaSjjqC7f+mtHQeIhFcUSQLFu5 488978485 EUN1 3.01.0.1"
And i've tried a little to stream from my own (already recorded) game. But all i get is unable to find match. My question is: Does anyone here know how this works?
Thanks!
TL;DR; You can't stream anything, but you can open LoLReplay in spectator mode for a specific match.
Try reinstalling LoLReplay, seemed to fix the issues that I was having.
The title of your post is somewhat misleading as no streaming actually happens - all that the link does is open LoLReplay on your local machine and pass in the details of the match you want to spectate.
This will only work for matches that are happening now, as it connects in a similar way as the LoL client does when you spectate a match.
Calling LoLReplay from the browser
The links seem to be formatted as follows:
lrf://spectator [Observer IP Address][:Observer Port] [Observer Encryption Key] [Game Id] [Platform Id] [Client Version?]
lrf://spectator tells LoLReplay to open up in spectator mode.
Observer IP Address is required and can either be a hostname or an IP address. The hostname is usually in the format spectator.[eu/na/br/etc.].lol.riotgames.com.
Observer Port is optional, I believe it defaults to 8088 which appears to be the default spectator mode port.
Observer Encryption Key... is a required per-match encryption key.
Game Id is a required, per-match integer id.
Platform Id is a more specific version of the region, I guess relating to how Riot have grouped their servers. For example EUW1.
Client Version, the last field appears to be a version number - I can only assume this is either the version of the client that LoLReplay is using OR the version of the client the players in the match are using.
How to find IP address, encryption key etc.
Edit: you can now grab all the info you need using the official Riot API, you just need the SummonerId of the user you're querying for. See current-game API docs for usage.