I don't have ant in my server. When I do rhc ssh myapp and tried to use ant, it shows "bash: ant: command not found". But I find jars related to ant in my folder "jbossews/lib/catalina-ant.jar".
I tried to install ant by sudo apt-get install ant, but it shows "bash: /usr/bin/sudo: Permission denied"
so I dont know what to do.
Ant functionality is not available on OpenShift at this time. I'm working on clearing up some conflicting articles on our side. Also, root access (sudo) isn't available to users in their gears.
Just use the commands below:
wget https://www.apache.org/dist/ant/binaries/apache-ant-1.9.4-bin.zip
unzip apache-ant-1.9.4-bin.zip
Related
I have been trying to install Install-Package Google.Apis.Drive.v3 using this source with the difference that I have Ubuntu-18.04 instead of Windows.
I know it may be a simple question but I have been trying research how to do that from this morning. I installed sudo apt install nuget on my machine and have been trying to add packages or as in this case the Google.Apis.Drive.v3 package but no luck.
I went through this source which was useful, but does not carry information I was able to replicate on my Linux machine.
Also this source, this one and this one too. But also this last one is for Windows and was not very useful.
How do I install Google Apis Drive V3 via command line easily as it is documented for windows but on Ubunbtu-18.04?
Thanks for pointing to the right direction for solving this problem.
Solution
The way you install your Drive API's library is depending on the programming language you are aiming to use. These are the following commands to run depending on the different languages to interact with the API (with their respective links to the source of the setup):
Python:
pip install --upgrade google-api-python-client google-auth-httplib2 google-auth-oauthlib
C#/.NET:
Create a new Visual C# Console Application project in Visual Studio.
Open the NuGet Package Manager Console, select the package source nuget.org, and run the following command:
">Install-Package Google.Apis.Drive.v3
Java:
gradle init --type basic
mkdir -p src/main/java src/main/resources
Node.js:
npm install googleapis#39 --save
For the Browser check out the steps to follow here
I hope this has helped you. Let me know if you need anything else or if you did not understood something.
NOTE: For all Ubuntu-18.04 users that wish to install via command line the correct way is: sudo dotnet add package Google.Apis.Drive.v3
I'm getting an error while trying to connect raspberry running ubuntu mate to my Google Cloud SQL instance.
These are the step I did to install:
git clone https://github.com/GoogleCloudPlatform/cloudsql-proxy
cd cloudsql-proxy/
sudo sh download_proxy.sh
My instance is configured this way (I deleted some characters in the image and in the code):
I didn't set the network because I'll be using proxy
Then I download into the same folder my JSON key.
wget https://drive.google.com/file/d/my_key.json
And the start the proxy
sudo ./cloud_sql_proxy -instances=be - 21:us-central1:be =tcp:3306 \
-credential_file=./my_key.json &
But I'm getting the error:
pi#pi:~/cloudsql-proxy$ ./cloud_sql_proxy: 1: ./cloud_sql_proxy:
Syntax error: ")" unexpected
I've tried removing the .json and I was getting the same error before without credential, I think that the problem is in the setup.
My dir ls is:
Any help is appreciated :)
download_proxy.sh downloads the proxy compiled for the amd64 architecture of CPU (aka x86_64). Your raspberry Pi has a ARM CPU, so this binary cannot run on your machine.
Google does not provide pre-build ARM versions of the proxy. I don't even know if it is able to build on ARM CPU. If it is possible, this is how you must do it:
Install go, e.g. with apt-get install golang
Setup a GOPATH, as per https://github.com/golang/go/wiki/GOPATH
Run go get github.com/GoogleCloudPlatform/cloudsql-proxy/cmd/cloud_sql_proxy
Run the proxy with $GOPATH/cloud_sql_proxy -instances=...
Ok.
I'm sharing what I did to make it work, as David I don't know what version was I downloading.
I tried to avoid installing Go but it was the only way to get it installed.
sudo apt-get install golang-go
export GOPATH=$HOME/go
go get github.com/GoogleCloudPlatform/cloudsql-proxy/cmd/cloud_sql_proxy
cd $GOPATH/bin
wget your_key.json
sudo ./cloud_sql_proxy -instances=the_full_name_of_the_instance=tcp:3306 -credential_file=./your_key.json &
But I was getting a error because I already have mysql running localy in the same port
So now I'm using a unix soquet
sudo ./cloud_sql_proxy -instances=the_full_name_of_the_instance -credential_file=./your_key.json &
And then it's ready for connections :)
Thanks guys
I found issues with this when compiling SQL-proxy. I did, however, find the instructions here worked great on my raspberry pi 3. Have to make sure to remove all prior installations then reinstall it
wget https://storage.googleapis.com/golang/go1.9.linux-armv6l.tar.gz
sudo tar -C /usr/local -xzf go1.9.linux-armv6l.tar.gz
export PATH=$PATH:/usr/local/go/bin # put into ~/.profile`
I am using CakePHP 3 and MAMP Pro server for my project. When I am trying to bake the cake, this error shows up:
Fatal error: You must enable the intl extension to use CakePHP.
I have even included intl.so and extension=php_intl.dll in my php.ini file but couldn't figure out solution for this error.
this issue was happening to me some days ago. I had installed Ubuntu 18.04 and php 7.1.
I was trying to run the comman php cake.php bake in orden to use cakephp's console but I was getting the following error message:
You must enable the intl extension to use CakePHP.
This extension (intl) was installed for php 7.1 (php7.1-intl) but this message was appearing every time I used php cake.php bake
After some google searches, I saw that I have to install the extension but with the following command:
sudo apt-get install php-intl
The same issue happened with mbstring extension, I used the command:
sudo apt-get install php-mbstring
then I restarted the apache server with:
sudo service apache2 restart
It's difficult to pinpoint exactly what's wrong without seeing your system setup. However based on what was said in the question, you may be setting up the intl extension incorrectly.
First off, if your OS is Linux/macOS and the PHP extension is a shared library (i.e. has a .so extension) then the php.ini entry should be extension=intl.so not extension=php_intl.dll. Also make sure the intl.so file is in the directory configured under the ini entry extension_dir. Otherwise make sure the extension ini entry is fully qualified (e.g. extension=/path/to/extension/dir/intl.so).
If you are using a Linux OS that has a package manager such as Debian/Ubuntu, you may be able to more easily install the extension for the PHP packaged for that distro. For example, in Ubuntu/Debian the package php5-intl provides the intl extension for PHP5 (I assume it's something similar for PHP7 if you've enabled those repos).
If you build PHP from source, you can try bundling the extension into your PHP. See the instructions from the manual.
I faced the same issue.
I added extension="php_intl.dll" in php.ini and restarted the Apache server.
Now it is working.
I had the same issue. After starting from scratch, I did :
$ brew install php
$ composer install && composer update && composer dump-autoload --optimize
$ composer self-update && composer create-project --prefer-dist cakephp/app:^3.8 cms
$ cd cms
$ bin/cake server
And it was working !
I'm starting to develop with the stack meanjs. I'm using Cloud9 as a cloud IDE (I need its team functionalities). I tried previously to install mean in my local machine successfully. My problem arise when I try to install it in my cloud9 workspace. Does anybody know how to do it? I tried this https://github.com/meanjs/mean/issues/4 but it's not working.
Thank you so much in advance.
What you need to do is just following the steps that I listed in command line. I found the solution from youtube.
https://www.youtube.com/watch?v=RQ1HqBjT890
First, you need to utilize mongoDB. Type following:
echo "export NODE_PATH=$NODE_PATH:/home/ubuntu/.nvm/v0.10.35/lib/node_modules" >> ~/.bashrc && source ~/.bashrc
mkdir data
echo 'mongod --bind_ip=$IP --dbpath=data --nojournal --rest "$#"' > mongod
chmod a+x mongod
./mongod
At this point, your mongoDB server is running. Then, you need to install node package manager, update it. Also, install yo generator.
npm install npm -g
npm update
npm install -g yo
npm install -g generator-meanjs
Then, create your project directory, create your mean app.
mkdir myMeanProject
cd myMeanProject
yo meanjs
Open a new terminal window, and run server.
cd myNewProject
grunt
Is there a way to install pdftk on Openshift
It is available on Fedora and Centos - I tried yum and apt get but neither works
I need it for a Sinatra App I have
You will not be able to use yum on OpenShift Online, as you do not have root privileges. You can try downloading the source and compile/install it into your app-root/data directory, or enter your request to have it installed here: http://openshift.com/ideas