I've achieved a successful WebRTC connection using Firebase - but it only works if both users are on the same local network. I've tried using using different STUN servers, and even used TURN, but with the same result.
Is there any sample code or any place which shows how to achieve basic signalling for WebRTC using Firebase? I've tried looking at the docs, and there doesn't seem to be. What confuses me more is that my app works in the local network, but not outside of it.
Btw, I've also used PubNub and I've no problem using that to achieve signalling (even across networks).
I've set up a reference to my data like this
myDataRef = new Firebase('https://<myapp>.firebaseio.com');
myDataRef.on('value', function(snapshot) {
var json = snapshot.val();
and I communicate messages like so:
myDataRef.set(json);
The json message will include the action type (candidate, or offer or answer) and will also include the SDP, if required.
Any help on this will be appreciated!
Related
I'am currently playing around with the Couchbase Sync-Gateway and have built a demo app.
What is the intended behavior if a user logs in with the same username on a different device (which has an empty database) or if he deleted the local database?
I'am expecting that all the data from the server should get synced back to the clients.
Is this correct?
My problem is that if i'am deleting the database or login from a different device, nothing will get synced.
Ok i figured it out and it's exactly how i thought it would be.
If i log in from a different device i get all the data synced automatically.
My problem was the missing sync function. I thought it will use a default and route all documents to the public channel automatically.
I'am now using the following simple sync-function:
"sync": `function (doc, oldDoc) {
channel('!');
access('demo#example.com', '*');
}`
This will simply route all documents to the public channel and grant my demo-user access to it.
I think this shouldn't be used in production but it's a good starting point for playing around.
Now everything is working fine.
Edit: I've now found the missing info:
https://docs.couchbase.com/sync-gateway/current/configuration-properties.html#databases-this_db-sync
If you don't supply a sync function, Sync Gateway uses the following default sync function
...
The channels property is an array of strings that contains the names of the channels to which the document belongs. If you do not include a channels property in a document, the document does not appear in any channels.
I've got a Windows Store app that's a WinRT Phone/Desktop app (i.e. not a UWP app), targeting Windows 8.1 and up.
It's been on the store for several years now, but recently it stopped being able to connect with various web APIs and websites (YouTube, as well as my own site) using HTTPS.
I have a WPF version of this app as well, and this happened on that app recently as well, and to fix it I used System.Net.ServicePointManager. Unfortunately, in my WinRT environment, System.Net doesn't include ServicePointManager. In my WPF app, I did this, and it worked just fine:
ServicePointManager.ServerCertificateValidationCallback = delegate
{
Debug.WriteLine("returning true (the ssl is valid)");
return true;
};
// our server is using TLS 1.2
ServicePointManager.SecurityProtocol = SecurityProtocolType.Ssl3 | SecurityProtocolType.Tls | SecurityProtocolType.Tls11 | SecurityProtocolType.Tls12;
In doing some research around the internet, it seems that .NET 4.6 should include ServicePointManager, but I don't see any way to change (or even see) my version of .NET in the WinRT development environment.
I looked some more and found that a StreamSocket could be used to connect with TLS1.2... but that seems primarily designed to enable bluetooth communications, or communications to a web endpoint, but only by hostname... which is insufficient for me. I need to connect to an actual website, not just the base-level domain.
Trying this, I did the following:
StreamSocket socket = new StreamSocket();
string serverServiceName = "https";
socket.Control.KeepAlive = false;
url = "inadaydevelopment.com";
HostName serverHost = new HostName(url);
await socket.ConnectAsync(serverHost, serverServiceName, SocketProtectionLevel.Tls12);
text = await ReadDataFromSocket(socket);
I can include the code for ReadDataFromSocket() if necessary, but it seems to work, reading the data from the socket as expected when I point it at https://google.com. However, I can't seem to figure out how to point the socket at anything useful. The homepage of inadaydevelopment.com isn't what I want; I'm looking to consume a web API hosted on that server, but can't seem to find a way to do that.
Since the first parameter to the ConnectAsync() method is just HostName, the second parameter (remoteServiceName) must be the way to connect to the actual API or webpage I'm trying to connect to. According to the docs, that is The service name or TCP port number of the remote network destination... I haven't seen any example values for this parameter other than https and various numeric values, neither of which is going to get me to the API endpoint or webpage I'm trying to connect to.
So, with that super-long preamble out of the way, my question boils down to this:
Is there a way for me to use System.Net.ServicePointManager in my WinRT app like I do in my WPF app? If so, how?
If not, how can I use StreamSocket to connect to the exact web service or webpage I want to connect to, rather than just the top-level host?
If that's not possible, by what other means can I consume web content using TLS1.2?
Thanks in advance for any help or advice.
Use Windows.Web.Http API instead of System.Net.Http API.
System.Net.Http does not support TLS1.2 but Windows.Web.Http does in WinRT apps.
I have been reading the documentation for last 2 days. I'm new to feathersjs.
First issue: any link related to feathersjs is not accessible. Such as this.
Giving the following error:
This page isn’t working
legacy.docs.feathersjs.com redirected you too many times.
Hence I'm unable to traceback to similar types or any types of previously asked threads.
Second issue: It's a great framework to start with Real-time applications. But not all real time application just require alone DB access, their might be access required to something like Amazon S3, Microsoft Azure etc. In my case it's the same and it's more like problem with setting up routes.
I have executed the following commands:
feathers generate app
feathers generate service (service name: upload, REST, DB: Mongoose)
feathers generate authentication (username and password)
I have the setup with me, ready but how do I add another custom service?
The granularity of the service starts in the following way (Use case only for upload):
Conventional way of doing it >> router.post('/upload', (req, res, next) =>{});
Assume, I'm sending a file using data form, and some extra param like { storage: "s3"} in the req.
Postman --> POST (Only) to /upload ---> Process request (isStorageExistsInRequest?) --> Then perform the actual upload respectively to the specific Storage in Req and log the details in local db as well --> Send Response (Success or Failure)
Another thread on stack overflow where you have answered with this:
app.use('/Category/ExclusiveContents/:categoryId', {
create(data, params) {
// do complex stuff here
params.categoryId // the id of the category
data // -> additional data from the POST request
}
});
The solution can viewed in this way as well, since featherjs supports micro service approach, It would be great to have sub-routes like:
/upload_s3 -- uploads to s3
/upload_azure -- uploads to azure and so on.
/upload -- main route which is exposed to users. User requests, process request, call the respective sub-route. (Authentication and Auth to be included as well)
How to solve these types of problems using existing setup of feathersjs?
1) This is a deployment issue, Netlify is looking into it. The current documentation is not on the legacy domain though, what you are looking for can be found at docs.feathersjs.com/api/databases/querying.html.
2) A custom service can be added by running feathers generate service and choosing the custom service option. The functionality can then be implemented in src/services/<service-name>/<service-name>.class.js according to the service interface. For file uploads, an example on how to customize the parameters for feathers-blob (which is used in the file uploading guide) can be found in this issue.
Good Evening!
I've been looking into the possibility of using GAS(Google Apps Script) to host a small bit of javascript that lets me use the new Google finance apps api. The intention being that I'll be using the stock information for a project which involves the use of stock data. I know that there are a few ways to get stock information from Google, but the data that the finanace app returns is more in-line with other sources we are using. (One constraint on this project is that we have multiple sources).
I've written the javascript and I can call a httpc:request to the URL for the script given to me from Google. In the browser the JS returns the json object as I want it, however when the call is made from Erlang I'm getting it in a list of ascii. From checking the values it appears to be a document starting like:
Below is the javascript and the url to see the json:
https://script.google.com/macros/s/AKfycbzEvuuQl4jkrbPCz7hf9Zv4nvIOzqAkBxL1ixslLBxmSEhksQM/exec
function doGet() {
var stock = FinanceApp.getStockInfo('LON:TSCO');
return ContentService.createTextOutput(JSON.stringify(stock))
.setMimeType(ContentService.MimeType.JSON);
}
For the erlang, it's a simple request but I've not been doing erlang long, so perhaps I've messed something up here (The URL being the one mentioned above). I've got crypto / ssl / inets when I'm testing this on the command line.
{ok, {Version, Headers, Body}} = httpc:request(get, URL, []}, [], []).
I think it's also worth mentioning that when i curl it from Cygwin, I get a massive load of HTML also, I've included it below, but if you see it you'll thank me for not posting it in here! http://pastebin.com/UtJHXjRm
I've been updating the script as I go with the new versions but I'm at a bit of a loss as to why it's not returning correctly.
If anyone can give me any pointers I'd be very grateful! I get the feeling that it's not intended to be used this way, perhaps only within other Google products and such.
Cheers!
It would be necessary to review how are you deploying the Web App, specifically the Who has access to the app, to access without authentication should be configured as shown in the image:
See Deploying Your Script as a Web App from the documentation.
In my test, by running:
curl -L https://script.google.com/macros/s/************/exec
Get the following result:
{
"priceopen":358,
"change":2.199981689453125,
"high52":388.04998779296875,
"tradetime":"2013-10-11T15:35:18.000Z",
"currency":"GBX",
"timezone":"Europe/London",
"low52":307,
"quote":357.8999938964844,
"name":"Tesco PLC",
"exchange":"LON",
"marketcap":28929273763,
"symbol":"TSCO",
"volumedelay":0,
"shares":8083060703,
"pe":23.4719295501709,
"eps":0.15248000621795654,
"price":357.8999938964844,
"has_stock_data":true,
"volumeavg":14196534,
"volume":8885809,
"changepct":0.6184935569763184,
"high":359.5,
"datadelay":0,
"low":355.8999938964844,
"closeyest":355.70001220703125
}
Possibly your GET is not following the REDIRECT that happens when you use contentService. Look at the html returned there is a redirect in there.
I want to convert the JSON-P exposed by WCF service to a HTML Table.
For this i am using a plugin:
http://ajaxstack.com/jsonreport/
(THis is a excellent plugin because it handles date very well..)
It has a function:
_.jsonreport(jop);
where jop shoule be a JSON data.
To get the json data i am using jquery get:
To use this:
$.get('http://localhost:1256......', function (jop) {
alert(jop);
var test = _.jsonreport(jop);
alert(test);
});
But i started getting PERMISSION DENIED ERRORS in almost every browser except IE
(Might be because of cross domain restrictions....).
Can i get complete json using ajax. Actually ajax returns objects not complete JSON
How can i tackle this.
Any help is appreciated
I think you can us typical jsonp for this. Have you used it at all successfully in not IE browsers (IE being a microsoft prod, allows ur localhost to access xDomain if you've visited and deemed the other domain safe).
If u cannot use regular jsonp, I suggest using flyJSONP/YQL, jankyPOST/jankyPOST techniques.
reg jsonp:
script src="somedomain.com/somepage.json?myCallbackFunction=jsonp" /script
function myCallbackFunction(data){
return data
}
Hope this helps...
I am using two different projects one for service and one for application in asp.net both application run on localhost with differnet port number and IE does not support cross domain so it throws an error.
So to fixed this i need to combine both projects.