How can I restrict the input of a TextFieldsuch that it can only contain mathematical expressions?
Accepted inputs would be:
"3+5"
"-5 + 6"
"3/2(6*4)"
"6--5"
"+5-3"
etc..
And rejected inputs would be:
"5+++3"
"6(7)"
"6-6-+-7"
and so on.
Basically; the syntax I want it to be restricted to is the kind of syntax that programming languages normally use for evaluating mathematical expressions, kinda like the syntax input you'd expect from your everyday calculator.
I'm making a program in which I want the user to be able to input numbers and/or calculations into a text box, instead of having to use a calculator to do it and then arduously type out a number with 7 decimal places.
I've done a little look around and I've seen a lot of stuff involving Regex, postfix, BNF, and the like. A lot of it looked very complicated, too complex for my understanding, and none of it had anything to do with AS3.
However, I've had a thought about making this problem a whole lot simpler by just converting the string into a mathematical expression that AS3 can understand, and let Flash handle the errors using try catch, but I don't know how to do that either (Number("3+5")resulted to NaN).
I'm currently restricting text input to just numbers using Event.CHANGE, like this:
function Restrict(event:Event):void
{
if (event.currentTarget.text.indexOf(".") == -1)
{
event.currentTarget.restrict = "0-9.";
}
else
{
event.currentTarget.restrict = "0-9";
}
}
and it's seemed to work well so far.
I intend to implement this new restriction in this manner, but if there is a much more efficient way of restricting text input, please feel free to include it in a response.
Just to reiterate for clarity, I am asking how to implement functionality that will enable someone to input a mathematical expression into a TextField, and the program will register that input as an expression and calculate it.
Thanks for reading.
EDIT: I've done a bit more research and I've stumbled upon a Reverse Polish Notation calculator/parser/utility class/library/thingy that looks very useful. Seems kinda similar to the Executer class that fsbmain mentioned, but it looks a lot simpler to use and easier for me to understand.
However the problem still remains that I'd have to find an efficient way to restrict the syntax of user input to mathematical expressions, but at least now I have at least two ways of converting the string into a number for calculations.
That's quite a tough question actually, even definition for valid mathematical expressions which you mentioned is very complicated itself, i.e. expression 6-6-+-7 is a valid from as3 syntax point of view and gives result 7.
Regarding second part of your question:
converting the string into a mathematical expression that AS3 can understand
That's not possible to do with only native as3 means since eval-like functions are gone since as2 time, but you can try to use some as3-written syntax translator, i.e. Executer from flash-console project:
var exec:Executer = new Executer();
var res:* = exec.exec(this, "6-7");
trace("exec = " + res); //output "-1"
Although it's failed with some complex expressions from your question:
var exec:Executer = new Executer();
var res:* = exec.exec(this, "6-6-+-7");
trace("exec = " + res); //output "- 7"
What rules do you use to name your variables?
Where are single letter vars allowed?
How much info do you put in the name?
How about for example code?
What are your preferred meaningless variable names? (after foo & bar)
Why are they spelled "foo" and "bar" rather than FUBAR
function startEditing(){
if (user.canEdit(currentDocument)){
editorControl.setEditMode(true);
setButtonDown(btnStartEditing);
}
}
Should read like a narrative work.
One rule I always follow is this: if a variable encodes a value that is in some particular units, then those units have to be part of the variable name. Example:
int postalCodeDistanceMiles;
decimal reactorCoreTemperatureKelvin;
decimal altitudeMsl;
int userExperienceWongBakerPainScale
I will NOT be responsible for crashing any Mars landers (or the equivalent failure in my boring CRUD business applications).
Well it all depends on the language you are developing in. As I am currently using C# I tend you use the following.
camelCase for variables.
camelCase for parameters.
PascalCase for properties.
m_PascalCase for member variables.
Where are single letter vars allows?
I tend to do this in for loops but feel a bit guilty whenever I do so. But with foreach and lambda expressions for loops are not really that common now.
How much info do you put in the name?
If the code is a bit difficult to understand write a comment. Don't turn a variable name into a comment, i.e .
int theTotalAccountValueIsStoredHere
is not required.
what are your preferred meaningless variable names? (after foo & bar)
i or x. foo and bar are a bit too university text book example for me.
why are they spelled "foo" and "bar" rather than FUBAR?
Tradition
These are all C# conventions.
Variable-name casing
Case indicates scope. Pascal-cased variables are fields of the owning class. Camel-cased variables are local to the current method.
I have only one prefix-character convention. Backing fields for class properties are Pascal-cased and prefixed with an underscore:
private int _Foo;
public int Foo { get { return _Foo; } set { _Foo = value; } }
There's some C# variable-naming convention I've seen out there - I'm pretty sure it was a Microsoft document - that inveighs against using an underscore prefix. That seems crazy to me. If I look in my code and see something like
_Foo = GetResult();
the very first thing that I ask myself is, "Did I have a good reason not to use a property accessor to update that field?" The answer is often "Yes, and you'd better know what that is before you start monkeying around with this code."
Single-letter (and short) variable names
While I tend to agree with the dictum that variable names should be meaningful, in practice there are lots of circumstances under which making their names meaningful adds nothing to the code's readability or maintainability.
Loop iterators and array indices are the obvious places to use short and arbitrary variable names. Less obvious, but no less appropriate in my book, are nonce usages, e.g.:
XmlWriterSettings xws = new XmlWriterSettings();
xws.Indent = true;
XmlWriter xw = XmlWriter.Create(outputStream, xws);
That's from C# 2.0 code; if I wrote it today, of course, I wouldn't need the nonce variable:
XmlWriter xw = XmlWriter.Create(
outputStream,
new XmlWriterSettings() { Indent=true; });
But there are still plenty of places in C# code where I have to create an object that you're just going to pass elsewhere and then throw away.
A lot of developers would use a name like xwsTemp in those circumstances. I find that the Temp suffix is redundant. The fact that I named the variable xws in its declaration (and I'm only using it within visual range of that declaration; that's important) tells me that it's a temporary variable.
Another place I'll use short variable names is in a method that's making heavy use of a single object. Here's a piece of production code:
internal void WriteXml(XmlWriter xw)
{
if (!Active)
{
return;
}
xw.WriteStartElement(Row.Table.TableName);
xw.WriteAttributeString("ID", Row["ID"].ToString());
xw.WriteAttributeString("RowState", Row.RowState.ToString());
for (int i = 0; i < ColumnManagers.Length; i++)
{
ColumnManagers[i].Value = Row.ItemArray[i];
xw.WriteElementString(ColumnManagers[i].ColumnName, ColumnManagers[i].ToXmlString());
}
...
There's no way in the world that code would be easier to read (or safer to modify) if I gave the XmlWriter a longer name.
Oh, how do I know that xw isn't a temporary variable? Because I can't see its declaration. I only use temporary variables within 4 or 5 lines of their declaration. If I'm going to need one for more code than that, I either give it a meaningful name or refactor the code using it into a method that - hey, what a coincidence - takes the short variable as an argument.
How much info do you put in the name?
Enough.
That turns out to be something of a black art. There's plenty of information I don't have to put into the name. I know when a variable's the backing field of a property accessor, or temporary, or an argument to the current method, because my naming conventions tell me that. So my names don't.
Here's why it's not that important.
In practice, I don't need to spend much energy figuring out variable names. I put all of that cognitive effort into naming types, properties and methods. This is a much bigger deal than naming variables, because these names are very often public in scope (or at least visible throughout the namespace). Names within a namespace need to convey meaning the same way.
There's only one variable in this block of code:
RowManager r = (RowManager)sender;
// if the settings allow adding a new row, add one if the context row
// is the last sibling, and it is now active.
if (Settings.AllowAdds && r.IsLastSibling && r.Active)
{
r.ParentRowManager.AddNewChildRow(r.RecordTypeRow, false);
}
The property names almost make the comment redundant. (Almost. There's actually a reason why the property is called AllowAdds and not AllowAddingNewRows that a lot of thought went into, but it doesn't apply to this particular piece of code, which is why there's a comment.) The variable name? Who cares?
Pretty much every modern language that had wide use has its own coding standards. These are a great starting point. If all else fails, just use whatever is recommended. There are exceptions of course, but these are general guidelines. If your team prefers certain variations, as long as you agree with them, then that's fine as well.
But at the end of the day it's not necessarily what standards you use, but the fact that you have them in the first place and that they are adhered to.
I only use single character variables for loop control or very short functions.
for(int i = 0; i< endPoint; i++) {...}
int max( int a, int b) {
if (a > b)
return a;
return b;
}
The amount of information depends on the scope of the variable, the more places it could be used, the more information I want to have the name to keep track of its purpose.
When I write example code, I try to use variable names as I would in real code (although functions might get useless names like foo or bar).
See Etymology of "Foo"
What rules do you use to name your variables?
Typically, as I am a C# developer, I follow the variable naming conventions as specified by the IDesign C# Coding Standard for two reasons
1) I like it, and find it easy to read.
2) It is the default that comes with the Code Style Enforcer AddIn for Visual Studio 2005 / 2008 which I use extensively these days.
Where are single letter vars allows?
There are a few places where I will allow single letter variables. Usually these are simple loop indexers, OR mathematical concepts like X,Y,Z coordinates. Other than that, never! (Everywhere else I have used them, I have typically been bitten by them when rereading the code).
How much info do you put in the name?
Enough to know PRECISELY what the variable is being used for. As Robert Martin says:
The name of a variable, function, or
class, should answer all the big
questions. It should tell you why it
exists, what it does, and how it is
used. If a name requires a comment,
then the name does not reveal its
intent.
From Clean Code - A Handbook of Agile Software Craftsmanship
I never use meaningless variable names like foo or bar, unless, of course, the code is truly throw-away.
For loop variables, I double up the letter so that it's easier to search for the variable within the file. For example,
for (int ii=0; ii < array.length; ii++)
{
int element = array[ii];
printf("%d", element);
}
What rules do you use to name your variables? I've switched between underscore between words (load_vars), camel casing (loadVars) and no spaces (loadvars). Classes are always CamelCase, capitalized.
Where are single letter vars allows? Loops, mostly. Temporary vars in throwaway code.
How much info do you put in the name? Enough to remind me what it is while I'm coding. (Yes this can lead to problems later!)
what are your preferred meaningless variable names? (after foo & bar) temp, res, r. I actually don't use foo and bar a good amount.
What rules do you use to name your variables?
I need to be able to understand it in a year's time. Should also conform with preexisting style.
Where are single letter vars allows?
ultra-obvious things. E.g. char c; c = getc(); Loop indicies(i,j,k).
How much info do you put in the name?
Plenty and lots.
how about for example code?
Same as above.
what are your preferred meaningless variable names? (after foo & bar)
I don't like having meaningless variable names. If a variable doesn't mean anything, why is it in my code?
why are they spelled "foo" and "bar" rather than FUBAR
Tradition.
The rules I adhere to are;
Does the name fully and accurately describe what the variable represents?
Does the name refer to the real-world problem rather than the programming language solution?
Is the name long enough that you don't have to puzzle it out?
Are computed value qualifiers, if any, at the end of the name?
Are they specifically instantiated only at the point once required?
What rules do you use to name your variables?
camelCase for all important variables, CamelCase for all classes
Where are single letter vars allows?
In loop constructs and in mathematical funktions where the single letter var name is consistent with the mathematical definition.
How much info do you put in the name?
You should be able to read the code like a book. Function names should tell you what the function does (scalarProd(), addCustomer(), etc)
How about for example code?
what are your preferred meaningless variable names? (after foo & bar)
temp, tmp, input, I never really use foo and bar.
I would say try to name them as clearly as possible. Never use single letter variables and only use 'foo' and 'bar' if you're just testing something out (e.g., in interactive mode) and won't use it in production.
I like to prefix my variables with what they're going to be: str = String, int = Integer, bool = Boolean, etc.
Using a single letter is quick and easy in Loops: For i = 0 to 4...Loop
Variables are made to be a short but descriptive substitute for what you're using. If the variable is too short, you might not understand what it's for. If it's too long, you'll be typing forever for a variable that represents 5.
Foo & Bar are used for example code to show how the code works. You can use just about any different nonsensical characters to use instead. I usually just use i, x, & y.
My personal opinion of foo bar vs. fu bar is that it's too obvious and no one likes 2-character variables, 3 is much better!
In DSLs and other fluent interfaces often variable- and method-name taken together form a lexical entity. For example, I personally like the (admittedly heretic) naming pattern where the verb is put into the variable name rather than the method name. #see 6th Rule of Variable Naming
Also, I like the spartan use of $ as variable name for the main variable of a piece of code. For example, a class that pretty prints a tree structure can use $ for the StringBuffer inst var. #see This is Verbose!
Otherwise I refer to the Programmer's Phrasebook by Einar Hoest. #see http://www.nr.no/~einarwh/phrasebook/
I always use single letter variables in for loops, it's just nicer-looking and easier to read.
A lot of it depends on the language you're programming in too, I don't name variables the same in C++ as I do in Java (Java lends itself better to the excessively long variable names imo, but this could just a personal preference. Or it may have something to do with how Java built-ins are named...).
locals: fooBar;
members/types/functions FooBar
interfaces: IFooBar
As for me, single letters are only valid if the name is classic; i/j/k for only for local loop indexes, x,y,z for vector parts.
vars have names that convey meaning but are short enough to not wrap lines
foo,bar,baz. Pickle is also a favorite.
I learned not to ever use single-letter variable names back in my VB3 days. The problem is that if you want to search everywhere that a variable is used, it's kinda hard to search on a single letter!
The newer versions of Visual Studio have intelligent variable searching functions that avoid this problem, but old habits and all that. Anyway, I prefer to err on the side of ridiculous.
for (int firstStageRocketEngineIndex = 0; firstStageRocketEngineIndex < firstStageRocketEngines.Length; firstStageRocketEngineIndex++)
{
firstStageRocketEngines[firstStageRocketEngineIndex].Ignite();
Thread.Sleep(100); // Don't start them all at once. That would be bad.
}
It's pretty much unimportant how you name variables. You really don't need any rules, other than those specified by the language, or at minimum, those enforced by your compiler.
It's considered polite to pick names you think your teammates can figure out, but style rules don't really help with that as much as people think.
Since I work as a contractor, moving among different companies and projects, I prefer to avoid custom naming conventions. They make it more difficult for a new developer, or a maintenance developer, to become acquainted with (and follow) the standard being used.
So, while one can find points in them to disagree with, I look to the official Microsoft Net guidelines for a consistent set of naming conventions.
With some exceptions (Hungarian notation), I think consistent usage may be more useful than any arbitrary set of rules. That is, do it the same way every time.
.
I work in MathCAD and I'm happy because MathCAD gives me increadable possibilities in naming and I use them a lot. And I can`t understand how to programm without this.
To differ one var from another I have to include a lot of information in the name,for example:
1.On the first place - that is it -N for quantity,F for force and so on
2.On the second - additional indices - for direction of force for example
3.On the third - indexation inside vector or matrix var,for convinience I put var name in {} or [] brackets to show its dimensions.
So,as conclusion my var name is like
N.dirs / Fx i.row / {F}.w.(i,j.k) / {F}.w.(k,i.j).
Sometimes I have to add name of coordinate system for vector values
{F}.{GCS}.w.(i,j.k) / {F}.{LCS}.w.(i,j.k)
And as final step I add name of the external module in BOLD at the end of external function or var like Row.MTX.f([M]) because MathCAD doesn't have help string for function.
Use variables that describes clearly what it contains. If the class is going to get big, or if it is in the public scope the variable name needs to be described more accurately. Of course good naming makes you and other people understand the code better.
for example: use "employeeNumber" insetead of just "number".
use Btn or Button in the end of the name of variables reffering to buttons, str for strings and so on.
Start variables with lower case, start classes with uppercase.
example of class "MyBigClass", example of variable "myStringVariable"
Use upper case to indicate a new word for better readability. Don't use "_", because it looks uglier and takes longer time to write.
for example: use "employeeName".
Only use single character variables in loops.
Updated
First off, naming depends on existing conventions, whether from language, framework, library, or project. (When in Rome...) Example: Use the jQuery style for jQuery plugins, use the Apple style for iOS apps. The former example requires more vigilance (since JavaScript can get messy and isn't automatically checked), while the latter example is simpler since the standard has been well-enforced and followed. YMMV depending on the leaders, the community, and especially the tools.
I will set aside all my naming habits to follow any existing conventions.
In general, I follow these principles, all of which center around programming being another form of interpersonal communication through written language.
Readability - important parts should have solid names; but these names should not be a replacement for proper documentation of intent. The test for code readability is if you can come back to it months later and still be understanding enough to not toss the entire thing upon first impression. This means avoiding abbreviation; see the case against Hungarian notation.
Writeability - common areas and boilerplate should be kept simple (esp. if there's no IDE), so code is easier and more fun to write. This is a bit inspired by Rob Pyke's style.
Maintainability - if I add the type to my name like arrItems, then it would suck if I changed that property to be an instance of a CustomSet class that extends Array. Type notes should be kept in documentation, and only if appropriate (for APIs and such).
Standard, common naming - For dumb environments (text editors): Classes should be in ProperCase, variables should be short and if needed be in snake_case and functions should be in camelCase.
For JavaScript, it's a classic case of the restraints of the language and the tools affecting naming. It helps to distinguish variables from functions through different naming, since there's no IDE to hold your hand while this and prototype and other boilerplate obscure your vision and confuse your differentiation skills. It's also not uncommon to see all the unimportant or globally-derived vars in a scope be abbreviated. The language has no import [path] as [alias];, so local vars become aliases. And then there's the slew of different whitespacing conventions. The only solution here (and anywhere, really) is proper documentation of intent (and identity).
Also, the language itself is based around function level scope and closures, so that amount of flexibility can make blocks with variables in 2+ scope levels feel very messy, so I've seen naming where _ is prepended for each level in the scope chain to the vars in that scope.
I do a lot of php in nowadays, It was not always like that though and I have learned a couple of tricks when it comes to variable naming.
//this is my string variable
$strVar = "";
//this would represent an array
$arrCards = array();
//this is for an integer
$intTotal = NULL:
//object
$objDB = new database_class();
//boolean
$blValid = true;