Related
I've been using indexes on my MySQL databases for a while now but never properly learnt about them. Generally I put an index on any fields that I will be searching or selecting using a WHERE clause but sometimes it doesn't seem so black and white.
What are the best practices for MySQL indexes?
Example situations/dilemmas:
If a table has six columns and all of them are searchable, should I index all of them or none of them?
What are the negative performance impacts of indexing?
If I have a VARCHAR 2500 column which is searchable from parts of my site, should I index it?
You should definitely spend some time reading up on indexing, there's a lot written about it, and it's important to understand what's going on.
Broadly speaking, an index imposes an ordering on the rows of a table.
For simplicity's sake, imagine a table is just a big CSV file. Whenever a row is inserted, it's inserted at the end. So the "natural" ordering of the table is just the order in which rows were inserted.
Imagine you've got that CSV file loaded up in a very rudimentary spreadsheet application. All this spreadsheet does is display the data, and numbers the rows in sequential order.
Now imagine that you need to find all the rows that have some value "M" in the third column. Given what you have available, you have only one option. You scan the table checking the value of the third column for each row. If you've got a lot of rows, this method (a "table scan") can take a long time!
Now imagine that in addition to this table, you've got an index. This particular index is the index of values in the third column. The index lists all of the values from the third column, in some meaningful order (say, alphabetically) and for each of them, provides a list of row numbers where that value appears.
Now you have a good strategy for finding all the rows where the value of the third column is "M". For instance, you can perform a binary search! Whereas the table scan requires you to look N rows (where N is the number of rows), the binary search only requires that you look at log-n index entries, in the very worst case. Wow, that's sure a lot easier!
Of course, if you have this index, and you're adding rows to the table (at the end, since that's how our conceptual table works), you need to update the index each and every time. So you do a little more work while you're writing new rows, but you save a ton of time when you're searching for something.
So, in general, indexing creates a tradeoff between read efficiency and write efficiency. With no indexes, inserts can be very fast -- the database engine just adds a row to the table. As you add indexes, the engine must update each index while performing the insert.
On the other hand, reads become a lot faster.
Hopefully that covers your first two questions (as others have answered -- you need to find the right balance).
Your third scenario is a little more complicated. If you're using LIKE, indexing engines will typically help with your read speed up to the first "%". In other words, if you're SELECTing WHERE column LIKE 'foo%bar%', the database will use the index to find all the rows where column starts with "foo", and then need to scan that intermediate rowset to find the subset that contains "bar". SELECT ... WHERE column LIKE '%bar%' can't use the index. I hope you can see why.
Finally, you need to start thinking about indexes on more than one column. The concept is the same, and behaves similarly to the LIKE stuff -- essentially, if you have an index on (a,b,c), the engine will continue using the index from left to right as best it can. So a search on column a might use the (a,b,c) index, as would one on (a,b). However, the engine would need to do a full table scan if you were searching WHERE b=5 AND c=1)
Hopefully this helps shed a little light, but I must reiterate that you're best off spending a few hours digging around for good articles that explain these things in depth. It's also a good idea to read your particular database server's documentation. The way indices are implemented and used by query planners can vary pretty widely.
Check out presentations like More Mastering the Art of Indexing.
Update 12/2012: I have posted a new presentation of mine: How to Design Indexes, Really. I presented this in October 2012 at ZendCon in Santa Clara, and in December 2012 at Percona Live London.
Designing the best indexes is a process that has to match the queries you run in your app.
It's hard to recommend any general-purpose rules about which columns are best to index, or whether you should index all columns, no columns, which indexes should span multiple columns, etc. It depends on the queries you need to run.
Yes, there is some overhead so you shouldn't create indexes needlessly. But you should create the indexes that give benefit to the queries you need to run quickly. The overhead of an index is usually far outweighed by its benefit.
For a column that is VARCHAR(2500), you probably want to use a FULLTEXT index or a prefix index:
CREATE INDEX i ON SomeTable(longVarchar(100));
Note that a conventional index can't help if you're searching for words that may be in the middle of that long varchar. For that, use a fulltext index.
I won't repeat some of the good advice in other answers, but will add:
Compound Indices
You can create compound indices - an index that includes multiple columns. MySQL can use these from left to right. So if you have:
Table A
Id
Name
Category
Age
Description
if you have a compound index that includes Name/Category/Age in that order, these WHERE clauses would use the index:
WHERE Name='Eric' and Category='A'
WHERE Name='Eric' and Category='A' and Age > 18
but
WHERE Category='A' and Age > 18
would not use that index because everything has to be used from left to right.
Explain
Use Explain / Explain Extended to understand what indices are available to MySQL and which one it actually selects. MySQL will only use ONE key per query.
EXPLAIN EXTENDED SELECT * from Table WHERE Something='ABC'
Slow Query Log
Turn on the slow query log to see which queries are running slow.
Wide Columns
If you have a wide column where MOST of the distinction happens in the first several characters, you can use only the first N characters in your index. Example: We have a ReferenceNumber column defined as varchar(255) but 97% of the cases, the reference number is 10 characters or less. I changed the index to only look at the first 10 characters and improved performance quite a bit.
If a table has six columns and all of them are searchable, should i index all of them or none of them
Are you searching on a field by field basis or are some searches using multiple fields?
Which fields are most being searched on?
What are the field types? (Index works better on INTs than on VARCHARs for example)
Have you tried using EXPLAIN on the queries that are being run?
What are the negetive performance impacts of indexing
UPDATEs and INSERTs will be slower. There's also the extra storage space requirments, but that's usual unimportant these days.
If i have a VARCHAR 2500 column which is searchable from parts of my site, should i index it
No, unless it's UNIQUE (which means it's already indexed) or you only search for exact matches on that field (not using LIKE or mySQL's fulltext search).
Generally I put an index on any fields that i will be searching or selecting using a WHERE clause
I'd normally index the fields that are the most queried, and then INTs/BOOLEANs/ENUMs rather that fields that are VARCHARS. Don't forget, often you need to create an index on combined fields, rather than an index on an individual field. Use EXPLAIN, and check the slow log.
Load Data Efficiently: Indexes speed up retrievals but slow down inserts and deletes, as well as updates of values in indexed columns. That is, indexes slow down most operations that involve writing. This occurs because writing a row requires writing not only the data row, it requires changes to any indexes as well. The more indexes a table has, the more changes need to be made, and the greater the average performance degradation. Most tables receive many reads and few writes, but for a table with a high percentage of writes, the cost of index updating might be significant.
Avoid Indexes: If you don’t need a particular index to help queries perform better, don’t create it.
Disk Space: An index takes up disk space, and multiple indexes take up correspondingly more space. This might cause you to reach a table size limit more quickly than if there are no indexes. Avoid indexes wherever possible.
Takeaway: Don't over index
In general, indices help speedup database search, having the disadvantage of using extra disk space and slowing INSERT / UPDATE / DELETE queries. Use EXPLAIN and read the results to find out when MySQL uses your indices.
If a table has six columns and all of them are searchable, should i index all of them or none of them?
Indexing all six columns isn't always the best practice.
(a) Are you going to use any of those columns when searching for specific information?
(b) What is the selectivity of those columns (how many distinct values are there stored, in comparison to the total amount of records on the table)?
MySQL uses a cost-based optimizer, which tries to find the "cheapest" path when performing a query. And fields with low selectivity aren't good candidates.
What are the negetive performance impacts of indexing?
Already answered: extra disk space, lower performance during insert - update - delete.
If i have a VARCHAR 2500 column which is searchable from parts of my site, should i index it?
Try the FULLTEXT Index.
1/2) Indexes speed up certain select operations but they slow down other operations like insert, update and deletes. It can be a fine balance.
3) use a full text index or perhaps sphinx
I'm looking to add some mysql indexes to a database table. Most of the queries are for selects. Would it be best to create a separate index for each column, or add an index for province, province and number, and name. Does it even make sense to index province since there are only about a dozen options?
select * from employees where province = 'ab' and number = 'v45g';
select * from employees where province = 'ab';
If the usage changed to more inserts should I remove all the indexes except for the number?
An index is a data structure that maps the values of a column into a fast searchable tree. This tree contains the index of rows which the DB can use to find rows fast. One thing to know, some DB engines read plus or minus a bunch of rows to take advantage of disk read ahead. So you may actually read 50 or 100 rows per index read, and not just one. Hence, if you access 30% of a table through an index, you may wind up reading all table data multiple times.
Rule of thumb:
- index the more unique values, a tree with 2 branches and half of your table on either side is not too useful for narrowing down a search
- use as few index as possible
- use real world examples numbers as much as possible. Performance can change dynamically based on data or the whim of the DB engine, so it's very important to try and track how fast your queries are running consistently (ie: log this in case a query ever gets slow). But from this data you can add indexes without being blind
Okay, so there are multiple kinds of index, single and multiple column. You want multiple indexes when it makes sense for indexes to access each other, multiple columns typically when you are refining with a where clause. Think of the first as good when you want joins, or you have "or" conditions. The second is better when you have and conditions and successively filter rows.
In your case name does not make sense since like does not use index. city and number do make sense, probably as a multi-column index. Province could help as well as the last index.
So an index with these columns would likely help:
(number,city,province)
Or try as well just:
(number,city)
You should index fields that are searched upon and have high selectivity / cardinality. Indexes make writes slower.
Other thing is that indexes can be added and dropped at any time so maybe you should let this for a later review of the database and optimization of querys.
That being said one index that you can be sure to add is in the column that holds the name of a person. That's almost always used in searching.
According to MySQL documentation found here:
You can create multiple column indexes and the first column mentioned in the index declaration uses index when searched alone but not the others.
Documentation also says that if you create a hash of the columns and save in another column and index the hashed column the search could be faster then multiple indexes.
SELECT * FROM tbl_name
WHERE hash_col=MD5(CONCAT(val1,val2))
AND col1=val1 AND col2=val2;
You could use an unique index on province.
I am trying to understand indexes in MySQL. I know that an index created in a table can speed up executing queries and it can slow down the inserting and updating of rows.
When creating an index, I used this query on a table called authors that contains (AuthorNum, AuthorFName, AuthorLName, ...)
Create index Index_1 on Authors ([What to put here]);
I know I have to put a column name, but which one?
Do I have to put the column name that will be compared in the Where statement when a user query the Table or what?
The Anatomy of an Index
An index is a distinct data structure within a database and is data redundancy. Its primary purpose is to provide an ordered representation of the indexed data through a logical ordering which is independent of the physical ordering. We do this using a doubly linked list and a tree structure known as the balanced search tree (B-tree). B-trees are nice because they keep data sorted and allow searches, access, insertions, and deletions in logarithmic time. Because of the doubly linked list, we are able to go backwards or forwards as needed on the index for various queries easily. Inserts become simple since we only have to rearrange pointers to the different pieces of data. Databases use these doubly linked list to connect leaf nodes (usually in a B+ tree or B-tree), each of which are stored in a page, and to establish logical ordering between the leaf nodes. Operations like UPDATE or INSERT become slower because they are actually two writing operations in the filesystem (one for the table data and one for the index data).
Defining an Optimal Index With WHERE
To define an optimal index you must not only understand how indexes work, but you must also understand how the application queries the data. E.g., you must know the column combinations that appear in the WHERE clause.
A common restriction with queries on LAST_NAME and FIRST_NAME columns deals with case sensitivity. For example, instead of doing an exact search like Hotinger we would prefer to match all results such as HoTingEr and so on. This is very easy to do in a WHERE clause: we just say WHERE UPPER(LAST_NAME) = UPPER('Hotinger')
However, if we define an index of LAST_NAME and query, it will actually run a full table scan because the query is not on LAST_NAME but on UPPER(LAST_NAME). From the database's perspective, this is completely different. So, in this case you should define the index on UPPER(LAST_NAME) instead.
Indexes do not necessarily have to be for one column. For example, if the primary key is a composite key (consisting of multiple columns) it will create a concatenated index also known as a combined index. Note that the ordering of the concatenated index has a significant impact on its usability and scalability so it must be chosen carefully. Basically, the ordering should match the way it is ordered in the WHERE clause.
Defining an Optimal Index With LIKE
The position of the wildcard characters makes a huge difference. LIKE clauses only use the characters before the wildcard during tree traversal; the rest do not narrow the scanned index range. The more selective the prefix of the LIKE clause the more narrow the scanned index becomes. This makes the index lookup faster. As a tip, avoid LIKE clauses which lead with wildcards like "%OTINGER%" For full-text searches, MySQL offers MATCH and AGAINST keywords. Starting with MySQL 5.6, you can have full-text indexes. Look at Full-Text Search Functions from MySQL for more in-depth discussion on indexing these results.
Yes, generally you need an index on the column or columns that you compare in the WHERE clause of your queries to speed up queries.
If you search by AuthorFName, then you create an index on that column. If they search by AuthorLName, then you create an index on that column.
In this case though, maybe what you should be looking at is a FULLTEXT index. That would allow users to enter fuzzy queries, which would return a number of results ordered by relevance.
From the MySQL Manual:
Indexes are used to find rows with specific column values quickly.
Without an index, MySQL must begin with the first row and then read
through the entire table to find the relevant rows. The larger the
table, the more this costs. If the table has an index for the columns
in question, MySQL can quickly determine the position to seek to in
the middle of the data file without having to look at all the data. If
a table has 1,000 rows, this is at least 100 times faster than reading
sequentially. If you need to access most of the rows, it is faster to
read sequentially, because this minimizes disk seeks.
An index usually means a B-Tree. Understand the structure of the B-Tree and you'll understand what index can and cannot do.
In your particular case:
WHERE AuthorLName = 'something' and WHERE AuthorLName LIKE 'something%' can be sped-up by an index on {AuthorLName}.
WHERE AuthorLName = 'something AND AuthorFName = 'something else' can be sped-up by a composite index on {AuthorLName, AuthorFName} or {AuthorFName, AuthorLName}.
WHERE AuthorLName = 'something OR AuthorFName = 'something else' (which doesn't make much sense, but is here as an example) can be sped-up by having two indexes: on {AuthorLName} and on {AuthorFName}.
WHERE AuthorLName LIKE '%something' cannot be sped-up by a B-Tree index (cunsider full-text indexing).
Etc...
See Use The Index, Luke! for a much more thorough treatment of the subject than possible in a simple SO post.
Limited length index:
When using text columns or very large varchar columns you won't be able to create an index over the entire length of the text/varchar, there are some limits (around 1024 ASCII characters in length).
In such a case you specify the length in the index declaration.
CREATE INDEX `my_limited_length_index` ON `my_table`(`long_text_content`(512));
-- please notice the use of the numeric length of the index after the column name
Processed value index (apparently available in PostgreSQL not MySQL):
Indexes are not exclusively built from one column, some may be built from multiple columns and other may be built from just some of the info a column has. For example if you have a full datetime column but you know you're only going to filter records by date you can build an index based on the datetime column but only containing date info.
-- `my_table` has a `created` column of type timestamp
CREATE INDEX `my_date_created` ON `my_table`(DATE(`created`));
-- please notice the use of the DATE function which extracts only
-- the date from the `created` timestamp
index shall span the columns you are going to use in WHERE statement.
To better understand, here is an example:
SELECT * FROM Authors WHERE AuthorNum > 10 AND AuthorLName LIKE 'A%';
SELECT * FROM Authors WHERE AuthorLName LIKE 'Be%';
If you are often using the shown above queries, you are highly adviced to have two indexes:
Create index AuthNum_AuthLName_Index on Authors (AuthorNum, AuthorLName);
Create index AuthLName_Index on Authors (AuthorLName);
The key thing to remember: index shall have the same combiation of columns used in WHERE statements
I've been using indexes on my MySQL databases for a while now but never properly learnt about them. Generally I put an index on any fields that I will be searching or selecting using a WHERE clause but sometimes it doesn't seem so black and white.
What are the best practices for MySQL indexes?
Example situations/dilemmas:
If a table has six columns and all of them are searchable, should I index all of them or none of them?
What are the negative performance impacts of indexing?
If I have a VARCHAR 2500 column which is searchable from parts of my site, should I index it?
You should definitely spend some time reading up on indexing, there's a lot written about it, and it's important to understand what's going on.
Broadly speaking, an index imposes an ordering on the rows of a table.
For simplicity's sake, imagine a table is just a big CSV file. Whenever a row is inserted, it's inserted at the end. So the "natural" ordering of the table is just the order in which rows were inserted.
Imagine you've got that CSV file loaded up in a very rudimentary spreadsheet application. All this spreadsheet does is display the data, and numbers the rows in sequential order.
Now imagine that you need to find all the rows that have some value "M" in the third column. Given what you have available, you have only one option. You scan the table checking the value of the third column for each row. If you've got a lot of rows, this method (a "table scan") can take a long time!
Now imagine that in addition to this table, you've got an index. This particular index is the index of values in the third column. The index lists all of the values from the third column, in some meaningful order (say, alphabetically) and for each of them, provides a list of row numbers where that value appears.
Now you have a good strategy for finding all the rows where the value of the third column is "M". For instance, you can perform a binary search! Whereas the table scan requires you to look N rows (where N is the number of rows), the binary search only requires that you look at log-n index entries, in the very worst case. Wow, that's sure a lot easier!
Of course, if you have this index, and you're adding rows to the table (at the end, since that's how our conceptual table works), you need to update the index each and every time. So you do a little more work while you're writing new rows, but you save a ton of time when you're searching for something.
So, in general, indexing creates a tradeoff between read efficiency and write efficiency. With no indexes, inserts can be very fast -- the database engine just adds a row to the table. As you add indexes, the engine must update each index while performing the insert.
On the other hand, reads become a lot faster.
Hopefully that covers your first two questions (as others have answered -- you need to find the right balance).
Your third scenario is a little more complicated. If you're using LIKE, indexing engines will typically help with your read speed up to the first "%". In other words, if you're SELECTing WHERE column LIKE 'foo%bar%', the database will use the index to find all the rows where column starts with "foo", and then need to scan that intermediate rowset to find the subset that contains "bar". SELECT ... WHERE column LIKE '%bar%' can't use the index. I hope you can see why.
Finally, you need to start thinking about indexes on more than one column. The concept is the same, and behaves similarly to the LIKE stuff -- essentially, if you have an index on (a,b,c), the engine will continue using the index from left to right as best it can. So a search on column a might use the (a,b,c) index, as would one on (a,b). However, the engine would need to do a full table scan if you were searching WHERE b=5 AND c=1)
Hopefully this helps shed a little light, but I must reiterate that you're best off spending a few hours digging around for good articles that explain these things in depth. It's also a good idea to read your particular database server's documentation. The way indices are implemented and used by query planners can vary pretty widely.
Check out presentations like More Mastering the Art of Indexing.
Update 12/2012: I have posted a new presentation of mine: How to Design Indexes, Really. I presented this in October 2012 at ZendCon in Santa Clara, and in December 2012 at Percona Live London.
Designing the best indexes is a process that has to match the queries you run in your app.
It's hard to recommend any general-purpose rules about which columns are best to index, or whether you should index all columns, no columns, which indexes should span multiple columns, etc. It depends on the queries you need to run.
Yes, there is some overhead so you shouldn't create indexes needlessly. But you should create the indexes that give benefit to the queries you need to run quickly. The overhead of an index is usually far outweighed by its benefit.
For a column that is VARCHAR(2500), you probably want to use a FULLTEXT index or a prefix index:
CREATE INDEX i ON SomeTable(longVarchar(100));
Note that a conventional index can't help if you're searching for words that may be in the middle of that long varchar. For that, use a fulltext index.
I won't repeat some of the good advice in other answers, but will add:
Compound Indices
You can create compound indices - an index that includes multiple columns. MySQL can use these from left to right. So if you have:
Table A
Id
Name
Category
Age
Description
if you have a compound index that includes Name/Category/Age in that order, these WHERE clauses would use the index:
WHERE Name='Eric' and Category='A'
WHERE Name='Eric' and Category='A' and Age > 18
but
WHERE Category='A' and Age > 18
would not use that index because everything has to be used from left to right.
Explain
Use Explain / Explain Extended to understand what indices are available to MySQL and which one it actually selects. MySQL will only use ONE key per query.
EXPLAIN EXTENDED SELECT * from Table WHERE Something='ABC'
Slow Query Log
Turn on the slow query log to see which queries are running slow.
Wide Columns
If you have a wide column where MOST of the distinction happens in the first several characters, you can use only the first N characters in your index. Example: We have a ReferenceNumber column defined as varchar(255) but 97% of the cases, the reference number is 10 characters or less. I changed the index to only look at the first 10 characters and improved performance quite a bit.
If a table has six columns and all of them are searchable, should i index all of them or none of them
Are you searching on a field by field basis or are some searches using multiple fields?
Which fields are most being searched on?
What are the field types? (Index works better on INTs than on VARCHARs for example)
Have you tried using EXPLAIN on the queries that are being run?
What are the negetive performance impacts of indexing
UPDATEs and INSERTs will be slower. There's also the extra storage space requirments, but that's usual unimportant these days.
If i have a VARCHAR 2500 column which is searchable from parts of my site, should i index it
No, unless it's UNIQUE (which means it's already indexed) or you only search for exact matches on that field (not using LIKE or mySQL's fulltext search).
Generally I put an index on any fields that i will be searching or selecting using a WHERE clause
I'd normally index the fields that are the most queried, and then INTs/BOOLEANs/ENUMs rather that fields that are VARCHARS. Don't forget, often you need to create an index on combined fields, rather than an index on an individual field. Use EXPLAIN, and check the slow log.
Load Data Efficiently: Indexes speed up retrievals but slow down inserts and deletes, as well as updates of values in indexed columns. That is, indexes slow down most operations that involve writing. This occurs because writing a row requires writing not only the data row, it requires changes to any indexes as well. The more indexes a table has, the more changes need to be made, and the greater the average performance degradation. Most tables receive many reads and few writes, but for a table with a high percentage of writes, the cost of index updating might be significant.
Avoid Indexes: If you don’t need a particular index to help queries perform better, don’t create it.
Disk Space: An index takes up disk space, and multiple indexes take up correspondingly more space. This might cause you to reach a table size limit more quickly than if there are no indexes. Avoid indexes wherever possible.
Takeaway: Don't over index
In general, indices help speedup database search, having the disadvantage of using extra disk space and slowing INSERT / UPDATE / DELETE queries. Use EXPLAIN and read the results to find out when MySQL uses your indices.
If a table has six columns and all of them are searchable, should i index all of them or none of them?
Indexing all six columns isn't always the best practice.
(a) Are you going to use any of those columns when searching for specific information?
(b) What is the selectivity of those columns (how many distinct values are there stored, in comparison to the total amount of records on the table)?
MySQL uses a cost-based optimizer, which tries to find the "cheapest" path when performing a query. And fields with low selectivity aren't good candidates.
What are the negetive performance impacts of indexing?
Already answered: extra disk space, lower performance during insert - update - delete.
If i have a VARCHAR 2500 column which is searchable from parts of my site, should i index it?
Try the FULLTEXT Index.
1/2) Indexes speed up certain select operations but they slow down other operations like insert, update and deletes. It can be a fine balance.
3) use a full text index or perhaps sphinx
I need to add indexes to my table (columns) and stumbled across this post:
How many database indexes is too many?
Quote:
“Having said that, you can clearly add a lot of pointless indexes to a table that won't do anything. Adding B-Tree indexes to a column with 2 distinct values will be pointless since it doesn't add anything in terms of looking the data up. The more unique the values in a column, the more it will benefit from an index.”
Is an Index really pointless if there are only two distinct values? Given a table as follows (MySQL Database, InnoDB)
Id (BIGINT)
fullname (VARCHAR)
address (VARCHAR)
status (VARCHAR)
Further conditions:
The Database contains 300 Million records
Status can only be “enabled” and “disabled”
150 Million records have status= enabled and 150 Million records have
stauts= disabled
My understanding is, without having an index on status, a select with where status=’enabled’ would result in a full tablescan with 300 Million Records to process?
How efficient is the lookup when I use a BTREE index on status?
Should I index this column or not?
What alternatives (maybe any other indexes) does MySQL InnoDB provide to efficiently look records up by the "where status="enabled" clause in the given example with a very low cardinality/selectivity of the values?
The index that you describe is pretty much pointless. An index is best used when you need to select a small number of rows in comparison to the total rows.
The reason for this is related to how a database accesses a table. Tables can be assessed either by a full table scan, where each block is read and processed in turn. Or by a rowid or key lookup, where the database has a key/rowid and reads the exact row it requires.
In the case where you use a where clause based on the primary key or another unique index, eg. where id = 1, the database can use the index to get an exact reference to where the row's data is stored. This is clearly more efficient than doing a full table scan and processing every block.
Now back to your example, you have a where clause of where status = 'enabled', the index will return 150m rows and the database will have to read each row in turn using separate small reads. Whereas accessing the table with a full table scan allows the database to make use of more efficient larger reads.
There is a point at which it is better to just do a full table scan rather than use the index. With mysql you can use FORCE INDEX (idx_name) as part of your query to allow comparisons between each table access method.
Reference:
http://dev.mysql.com/doc/refman/5.5/en/how-to-avoid-table-scan.html
I'm sorry to say that I do not agree with Mike. Adding an index is meant to limit the amount of full records searches for MySQL, thereby limiting IO which usually is the bottleneck.
This indexing is not free; you pay for it on inserts/updates when the index has to be updated and in the search itself, as it now needs to load the index file (full text index for 300M records is probably not in memory). So it might well be that you get extra IO in stead of limitting it.
I do agree with the statement that a binary variable is best stored as one, a bool or tinyint, as that decreases the length of a row and can thereby limit disk IO, also comparisons on numbers are faster.
If you need speed and you seldom use the disabled records, you may wish to have 2 tables, one for enabled and one for disabled records and move the records when the status changes. As it increases complexity and risk this would be my very last choice of course. Definitely do the move in 1 transaction if you happen to go for it.
It just popped into my head that you can check wether an index is actually used by using the explain statement. That should show you how MySQL is optimizing the query. I don't really know hoe MySQL optimizes queries, but from postgresql I do know that you should explain a query on a database approximately the same (in size and data) as the real database. So if you have a copy on the database, create an index on the table and see wether it's actually used. As I said, I doubt it, but I most definitely don't know everything:)
If the data is distributed like 50:50 then query like where status="enabled" will avoid half scanning of the table.
Having index on such tables is completely depends on distribution of data, i,e : if entries having status enabled is 90% and other is 10%. and for query where status="disabled" it scans only 10% of the table.
so having index on such columns depends on distribution of data.
#a'r answer is correct, however it needs to be pointed out that the usefulness of an index is given not only by its cardinality but also by the distribution of data and the queries run on the database.
In OP's case, with 150M records having status='enabled' and 150M having status='disabled', the index is unnecessary and a waste of resource.
In case of 299M records having status='enabled' and 1M having status='disabled', the index is useful (and will be used) in queries of type SELECT ... where status='disabled'.
Queries of type SELECT ... where status='enabled' will still run with a full table scan.
You will hardly need all 150 mln records at once, so I guess "status" will always be used in conjunction with other columns. Perhaps it'd make more sense to use a compound index like (status, fullname)
Jan, you should definitely index that column. I'm not sure of the context of the quote, but everything you said above is correct. Without an index on that column, you are most certainly doing a table scan on 300M rows, which is about the worst you can do for that data.
Jan, as asked, where your query involves simply "where status=enabled" without some other limiting factor, an index on that column apparently won't help (glad to SO community showed me what's up). If however, there is a limiting factor, such as "limit 10" an index may help. Also, remember that indexes are also used in group by and order by optimizations. If you are doing "select count(*),status from table group by status", an index would be helpful.
You should also consider converting status to a tinyint where 0 would represent disabled and 1 would be enabled. You're wasting tons of space storing that string vs. a tinyint which only requires 1 byte per row!
I have a similar column in my MySQL database. Approximately 4 million rows, with the distribution of 90% 1 and 10% 0.
I've just discovered today that my queries (where column = 1) actually run significantly faster WITHOUT the index.
Foolishly I deleted the index. I say foolishly, because I now suspect the queries (where column = 0) may have still benefited from it. So, instead I should explicitly tell MySQL to ignore the index when I'm searching for 1, and to use it when I'm searching for 0. Maybe.