In SilverStripe's CMS I want to remove the Content tab within a page. I can do this as follows:
$fields->removeFieldsFromTab('Root.Content.Main', 'Content');
I then want to create my own custom tab:
$fields->addFieldToTab('Root.Content.MyTab', $myField);
However by adding my own custom tab it brings the Content tab back.
The other option is just to make MyTab the default 'up' tab. Is that possible?
SilverStripe 2.4
To remove the Content tab in SilverStripe 2.4:
$fields->removeFieldFromTab('Root.Content', 'Main');
And to add a field to a tab named MyTab:
$fields->addFieldToTab('Root.Content.MyTab', $myField);
SilverStripe 3.1
To remove the Content tab in SilverStripe 3.1:
$fields->removeFieldFromTab('Root', 'Main');
And to add a field to a tab named MyTab:
$fields->addFieldToTab('Root.MyTab', $myField);
Notes
Removing the Content tab means you cannot control the page title.
removeFieldsFromTab removes a number of fields from a Tab/TabSet within this FieldList. It takes an array of field names as the second parameter.
removeFieldFromTab removes a single field from a Tab/TabSet within this FieldList. It takes a string field name as the second parameter.
In your case you want to use removeFieldFromTab not removeFieldsFromTab.
I know this question is old but I had same problem and I've figured it out.
In getCMSFields() method I wrote
$fields = parent::getCMSFields();
$fields->removeByName('XXX'); //this line removes tab
return $fields;
where 'XXX' is name of my tab 'Root.XXX'
I hope it'll help someone.
Related
Within the Moodle (v. 3.5.7) Atto editor (using both Chrome and Firefox) I've been trying to assign an ID to a particular row class, "span9". My ultimate objective is to assign this a unique ID and reference this element via jquery so as to append another element within it.
The ISSUE is that once I add an ID (id="checklist01") and click save, the ID simply does not appear in the DOM, and seems to not exist. When I re-enter the atto editor however, voila, there it is just sitting there. So it's NOT being removed completely... just not expressed somehow?
I have 2 screenshots linked below showing (1) the editor view, with the element and assigned ID highlighted, and (2) a screenshot of the DOM once the changes have been saved, with that same area highlighted, without the assigned ID.
Screenshots of ID Missing from DOM
Bootstrap ver. 4
So far I've tried switching the placement of the id in the atto editor (class coming first vs second after ); tried to add a "span" in front of the id (for some reason, I was desperate); and really just searched all over for someone who has encountered something similar.
I'm not sure how much help the html will provide, but here it is:
<div class="row-fluid colored">
<div class="iconbox span3">
h4>Your Completion Status (%)</h4>
</div>
<div id="checklist01" class="span9">
</div>
</div>
I found the reason for the removal of id attributes.
id attributes are removed because "Checklist" activity used safe HTML function of Moodle. If you want to access id attributes of description HTML follow below steps.
Go to mod\checklist\locallib.php file.
Then search formatted_intro() function (which is around line number 880).
In that function they used Moodle's format_text() function to return description text.
In that function, they have used 3 parameters.
string $text The text to be formatted.
int $format Identifier of the text format to be used
object/array $options text formatting options
Replace
$opts = array('trusted' => $CFG->enabletrusttext);
to
$opts = array('trusted' => $CFG->enabletrusttext,'allowid'=>true);
Then save your file and check. By following the above steps you can use id attributes.
i am currently working on to display the value in textboxes after adding row to the table. I am new to angular and seems i could not find the solution. At the moment, everytime i click on the Add button, the table will add new row but somehow the value that i have entered previously are gone. I need to make the value stays in the textbox every time the user adds new row.
Here is the source code that i have done:
https://stackblitz.com/edit/angular-hxduqp
Thank you.
That happens when you have multiple inputs with the same name.
One way to fix it is by giving your input names a suffix of your iterator i:
<input ... [name]="'from' + i" ...>
Here is your StackBlitz corrected:
https://stackblitz.com/edit/angular-bgdgpr?file=src/app/app.component.html
You just remove the name from the form control if not required else you need to provide the unique name to each control.
Working copy is here - https://stackblitz.com/edit/angular-gpq9nc
I'm quite new to VBA and I've been looking around but cannot seem to find a solution to my problem.
I have made a navigation form (frmNavigation) with 3 buttons, each referring to a different form, let's call them frm1, frm2 and frm3. In the navigationform the control buttons to switch between tabs are all named differently (btn1, btn2, btn3), but the subform that shows either frm1, frm2, or frm3 has the same name: “NavigationSubform” (this shows a different form depending on which tab is clicked on, based on the 'navagation target name' referring to frm1, frm2 and frm3).
When I want to refer to a textbox (txtBox1) on form 1 (first tab) and insert a value i can do this by:
Forms!frmNavigation!NavigationSubform.Form!txtBox1.Value = "insert awesome text"
But how would I refer to txtbox10 on the second tab (frm2)? Just using the following does not work:
Forms!frmNavigation!NavigationSubform.Form!txtBox10.Value
You then get the error 2465 (can't find the field).
I’ve been trying many different things, but can’t seem to get it right. So how do I refer to a textbox on a different tab than the first one?
Help us much appreciated!
Only one subform can be loaded at once. So you've just got to break this process into two steps.
Store the value from txtBox1 somewhere outside of the NavigationSubforms (a textbox on the parent form with visible = no, a global variable or a table works).
In frm2's On Load event, set txtbox10 to be the value you stored.
Just note, that you will need to add conditions in the On Load event if you want to avoid that textbox being set to an empty string or a wrong value if you have a setup where your filter is changing.
I am using the djFilteringSelect control to show values in a dropdown as user type a value.
The lookup and typehead is working fine. The user type a letter and the dropdown allow the user to select a value which is then displayed in the dropdown field.
If the user now decide to remove the value first selected so that the combobox is empty and leave the field, then the first value in the list is now automatically filled in.
The consequence of this is that if the user have added a value there is no way to remove the value and leave the box emtpy.
I am using required=false for both the control and the dojo attribute but it does not seem to help. There are also a few other djFilteringSelect attributes I have tried like "Autocomplete" and "trim" but it does not work
Here is the code
<xe:djFilteringSelect id="test" type="select" store="jsondata" searchAttr="data" required="false" labelType="html" invalidMessage="Not valid">
<xe:this.dojoAttributes>
<xp:dojoAttribute name="required" value="false"></xp:dojoAttribute>
</xe:this.dojoAttributes>
</xe:djFilteringSelect>
Initally the field is not required, but if the user have entered a value it is required.
My question is if there a way to prevent the djFilteringSelect control to always populate the field if I have previously added a value
I found someone who solved this in another stack overflow topic, by creating an empty entry in my data store. but I could not get this to work
Dojo: Select of empty value for FilteringSelect while required=false
I do this quite a lot. Right now I don't have a working sample to show you (since I moved to bootstrap - and have to code the selects by manually adding select2 controls) but something like this should do it...
I add an "empty" value at the top of my select - and that seems to work no matter whether I am using a combobox, djCombobox or combobox with select2 from bootstrap. My markup typically looks like:
<xp:comboBox id="inputLocationSelector" value="#{User.catchListType}" disableClientSideValidation="true">
<xp:selectItem itemLabel="(none)" itemValue=""></xp:selectItem>
<xp:selectItems>
<xp:this.value><![CDATA[${Configuration.meta.listLocationTypeOptions}]]></xp:this.value>
</xp:selectItems>
</xp:comboBox>
Then you could specify "(none)", "All" or " " for the "not-selected" value depending on your needs.
Validation is a different thing so just specifying "required=false" does not give you the "empty" value.
/John
I have a simple HTML page with an Unordered list. Is it possible to have an input field where you could add more to the list and it would be saved after you submitted it. What I would like to add would be the content inside of an <li> tag as well as the <li> tags themselves.
Thanks,
Here is a jsfiddle with a demo of what I think you want to achieve: http://jsfiddle.net/mvJNq/25/
Note that I can not answer as to how you should do this on the server, as that depends on how your serverside code, database etc is set up. However, if all you want is to display it as HTML and not have it saved as the user navigates away, you won't need the Submit button at all - then you just need the "Add" functionality.
Yes, it is possible - no, it will not be pretty. Here is what you would do:
create your base form with any default list items/inputs
use jQuery/JavaScript to bind an event handler to a button that you click when you want to add another item (alternatively, you could skip this step and just have another item appear by default)
on your event (be it checking that all input boxes have user-entered text, or the click event in step two) add another list item using jQuery.append(...)
ensure that you have a hidden input field to be used as a "counter" to keep track of the total number of list items and increment the value of this counter each time you add a new list item (note: you may need to use the ParseInt() method, depending on how you design the code for this field)
the page that is receiving the form's inputs should first read the hidden field so that it knows how many items to add, and then you should loop through the items (for or while loop) to add them correctly
Note: I don't know what Server-Side language you are using to handle receiving the form so step 5 is a fairly generic and universally viable option
Sure, it's possible.
The complexity of this comes in when you want to "save" the items. If the user leaves the page and comes back later will that data be available? If so, you will need a database like mySQL or similar. The li tags can be stored as well, but why?
If you just need that information available in that session you can store in a JavaScript variable and have it loop through the variable and spit them out as <li>'s
If you did want to use an add button instead of submit:
$('#addButton').click(function(){
var savedContent = $('#input').val();
}
To create + insert the <li>you can use javascript to create the element and append it to the ul. If you have more than one ul change the index:
var content = document.createElement('li');
content.innerText = savedContent;
document.getElementsByTagName('ul')[0].appendChild(content);