I'm trying to implement the SSIS package failure handler. I've added onError Event handler on whole package and failure operation the task where i'm expecting an error in the control flow.
The main task of the package is to pick up some data from the db,
the error handler is Send Mail Task sending email message with error description.
Now, I'm trying to emulate a common error: I make some changes in the SQL query (for example, set incorrect name for one of the columns) and try to run the package.
What i see is that package fails on validation stage and does not even proceed to execution, saying
Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occured. Error Code 0x80040E14. An OLE DB record is available. Source "Microsoft SQL Server Native Client 11.0"
Hresult 0x80040E14 Description "Statement(s) could not be prepared"
Description "The multipart identifier "MyTable.SomeWrongField" could not be bound".
Error: "OLE DB Source" failed validation and returned validation status "VS_BROKEN".
It doesn't even procceed to execution, failing right after validation.
How to set the error handle so it handles EVERY error, even the issue like this (incorrect sql request)?
Thanks.
A Validation error is the SSIS equivalent of a syntax error. There is no opportunity for recovery as the execution is dead in the water. OnTaskFailed and OnError won't catch this type of error (which is one of the reasons we no longer implement error notification from within our packages themselves)
Related
I am a complete novice at this so please bear with me.
I have written an SSIS package that takes Excel data, does Data conversion and then inserts into an Iseries table using an ODBC Connection.
When I select Table - row by row as the destination mode, the package works fine, but is extremely slow writing to the iSeries. All records are written. So there is no issue with the Excel data, or the Data Conversions.
However, if I change the ODBC Destination Data Access Mode to Table Name - batch mode the package fails with the following 3 errors:
[ODBC Destination FileName [160]] Error: SQLSTATE: HYC00, Message: [IBM][System i Access ODBC Driver]Driver not capable.;
[ODBC Destination FileName [160]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "ODBC Destination FileName.Inputs[ODBC Destination Input]" failed because error code 0xC020F453 occurred, and the error row disposition on "ODBC Destination FileName.Inputs[ODBC Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "ODBC Destination FileName" (160) failed with error code 0xC0209029 while processing input "ODBC Destination Input" (171). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I cannot work out whether it is a configuration issue within my iSeries ODBC driver configuration or a flag or something within the SSIS that I need to change?
As I say, I'm a complete novice so if you need any additional information please ask, and if I need to do any debugging or tracing, please explain to me how to do this.
I am running Windows 11 and the package and Excel file are on my laptop with a VPN connection to the iSeries.
I am trying to implement a Lookup Transformation in SSIS 2014 to load "no match output" into "SQL Server Destination", but I got errors at runtime:
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Test dataflow" (58) failed with error code 0xC02020C7 while processing input "SQL Server Destination Input" (74). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
As source task the "OLE DB Source" is used.
The Lookup Transformation uses the no cache mode.
In "SQL Server Destination"-Task: "Table lock" and "Check constraints" are checked and the timeout is set to 30.
What am I doing wrong? Could please someone help to solve this error?
Per my knowledge you cannot use SQL Server Destination while loading data, coming from Lookup Transformation.
You need to use OLE DB Destination.
I have an SSIS package that within a data flow task fetches a lot of data using an OLEDB connection.
When i run the package from my local machine it sometimes fails with the following error (snippet):
Warning: 0x80019002 at OnError: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. [..]
Error: 0xC0202009 at DFT Transform, SRC BSASREL1 [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionRead (recv()).]Generel netværksfejl. [..]
Error: 0xC0047038 at DFT Transform, SSIS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "SRC BSASREL1" (1) returned error code 0xC0202009.
The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
If I deploy the package to the server and run it with an agent job nothing goes wrong.
The error is periodical which makes it hard for me to debug....
Have anyone else had similar errors or do anyone have ideas of how to solve this?
EDIT: It seems that the problem is solved. We haven't had connection problems since we disabled TCP Chimney.
I don't think there's enough information here to isolate the root cause of the error. That's not SSIS' fault. There are error returned from various providers and SSIS simply "forwards" them. There are likely clues in the error message pointing to the cause.
I once spent a lot of time trying to fix a connectivity issue in SSIS and SQL Server. The root cause turned out to be one of the DCs had gone offline...
Andy
Does it run for a long time? Is the server where you deploy the package the same server where you read the data from?
If so, your problem might be external. I have similar issues with some heavy data transfer packages i run. Sometimes they fail if the server is too loaded with other processes. If that is the case, it is an external problem.
My advice is that you try to pinpoint the source of the error (trying to overload a test server while you run the package, or look for timeouts on the connection) and circumvent the limitation through a retry mechanism, or by running the package on lower traffic times.
well, 0xC0202009 is a DTS_E_OLEDBERROR error (http://msdn.microsoft.com/en-us/library/ms345164.aspx) and dbnetlib.dll process "has the ability to send keep-alive TCP/IP packets to Microsoft SQL Server in order to maintain the connection" (this is from BOL)
I would say something related timeouts.
There is a command timeout propertie on the OLE DB Source component. Can you check the value?
Or maybe on the connectionstring on the Connection manager
Nobody's done anything with this post in two years, but I ran into this error and found that the size of the data set determined whether this error was thrown or not. Oddly, when running the SSIS program through the IDE, I didn't get the error. It's only in production mode that I found this error occurring.
The solution, I found, was to break up my data sets (which were being written to XML) using something like this to limit the amount of data returned:
select * from (
select *, row_number() over (order by a.pkey asc) 'ranker' from sometable
) where Ranker <500000
Sucks, but that's what I found worked.
I have an SSIS package that runs without issue in debug mode, but when I try to edit the Excel Source to add more columns it is suddenly throwing the Unspecified Error
Error at MMR_MonthlyFiles_Import [Connection manager "Excel"]: SSIS Error Code
DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine"
Hresult: 0x80004005 Description: "Unspecified error".
Error at Add to Temp Table [Excel Source [1]]: SSIS Error Code
DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection
method call to the connection manager "Excel" failed with error code 0xC0202009
There may be error messages posted before this with more information on why the
AcquireConnection method call failed.
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
The path to the excel file opens without issue (I'm using a variable that holds the path and have pasted it into an explorer window and it opened the file). I have tried editing the Excel source on two other machines (other developers) and they had no issues and did not get the above error.
I was thinking of having the drivers re-installed, but if I click the debug/run button in BIDS it runs without issue so I don't think that will help. I have also tried rebooting several times and the issue still is not resolved.
Does anyone have any suggestions?
Thanks
I have been getting these issues too, you might want to check the following:
ProtectionLevel of the Package (e.g. DontSaveSensitive)
Connection string of the Data Source (e.g. Username and passwords)
Package Configurations - if you have one and if they are messed
up..
Hope this helps..
I am building an SSIS package and getting an error when setting "Name of the table or the view" in the OLE DB Destination editor.
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x8007000E. An OLE DB record is available.
Source: "Microsoft SQL Native Client 10.0" Hresult: 0x8007000E
Description: "Not enough storage is available to complete this operation.".
Failed to open a fastload rowset for "[dbo].[MyTable]".
Check that the object exists in the database.
Exception from HRESULT: 0xC0202040 (Microsoft.SqlServer.DTSPipelineWrap)
But, the table is definately there.
What could be causing this error?
Try saving the package and exiting from BIDS. Then start again, and try fixing the destination component.
It's only complaining about the table because it was in the process of handling that table at the time of the Out of Memory exception. It has a one track mind about that - failure setting up table == table does not exist.