This first that I try to download DB MySQL on "godaddy", but I receive this message:
Error
There is a chance that you may have found a bug in the SQL parser. Please examine your query closely, and check that the quotes are correct and not mis-matched. Other possible failure causes may be that you are uploading a file with binary outside of a quoted text area. You can also try your query on the MySQL command line interface. The MySQL server error output below, if there is any, may also help you in diagnosing the problem. If you still have problems or if the parser fails where the command line interface succeeds, please reduce your SQL query input to the single query that causes problems, and submit a bug report with the data chunk in the CUT section below:
----BEGIN CUT----
eNrt2c1OwkAUBeBDAQODiSyI67tgYwKlLYLQlRXLXwrUFnFpTERDJIUYMfI6PoHv4HtRp01Al26M
Jt4vM5mb07kzyWxre97IM6mlU8sgxx6apJFOjbrWFP5YftgI4U9kWuzdFsVg7V84JtVUTW3Wy/PF
vbj0PRr5JbI69nBcooktW65mAflW2/J68c5a9US4A8skQ9X1aFSF23WjraWRHx2mq3VyZsHqRTjW
sGPSNCivnu7KDRFftkmI/SSQTwCaXNDFjpJBFkhHZWab5eV8ewfENqhUAAJjjDHGGGOMMcb+OgXh
D5y6h14QLM7P+H0ZY4wxxhhjjLHf9pqI/+n/Wwko6KMtqy4Od6m7q/tIKkrhiL4JKWSXj4vl9cN0
jTRycf18M19NkcoahrwOOJXzIAOkc4UCjr8E4bYz/GwL8QHyNkoe
----END CUT----
----BEGIN RAW----
ERROR: C1 C2 LEN: 0 1 8609
STR: �
SVN: $Id$
MySQL: 5.0.96-log
USR OS, AGENT, VER: Win SAFARI 5.0.537
PMA: 2.11.11.3
PHP VER,OS: 5.1.6 Linux
LANG: en-utf-8
SQL: �
0H ��
// �InnoDB�JFHPJ) prop_keyprop_value 22#4#�prop_key�prop_value�
----END RAW----
SQL query:
� 0H �� // �InnoDB�JFHPJ) prop_keyprop_value 22#4#�prop_key�prop_value�
MySQL said: Documentation
#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'þ
' at line 1
What did wrong I do? I thing this is because version of MySQL, I changed from 5.6 to 5.0.96 and created new table, but receive same result.
Related
I want to use my SQL'book_data2' file from the desktop E drive as a 'SOURCE'. But I am getting an error code 1064 in MySQL workbench. Could you help me for that issue? I am giving the code and action output below.
Code:
SOURCE E:\DataPractice\Practice\book_data2.sql;
Action Output:
Error Code: 1064. You have an error in your SQL syntax; check the
manual that corresponds to your MySQL server version for the right
syntax to use near 'SOURCE E:\DataPractice\Practice\book_data2.sql' at
line 1 0.000 sec
There are a number of commands that are supported by the mysql client (that is, the command-line client, not MySQL Workbench), but they are parsed in the client, not sent to the server as SQL statements. The MySQL Server does not recognize these commands.
It can be confusing, but remember both the client and the server may process commands. You just have to read the documentation to learn which commands are in the list of client-only commands:
https://dev.mysql.com/doc/refman/8.0/en/mysql-commands.html
(Except USE, which is recognized by both mysql client and server, just to make sure there's an exception to every rule!)
If you want to use MySQL Workbench to "source" an SQL file, in other words load a file, read the SQL commands in that file, and execute them, Workbench does support this action, but they call it Data Import/Restore. It's documented here: https://dev.mysql.com/doc/workbench/en/wb-admin-export-import-management.html
Can anyone help me with this? I am currently trying to write my queries to a file and I will eventually close it with notee; call. I have used the tee call before but for some reason today I am having problems.
Here is the syntax in question:
tee c:/trash/test.txt;
select*from customer;
Here is the Error:
Error
There seems to be an error in your SQL query. The MySQL server error output below, if there is any, may also help you in diagnosing the problem.
ERROR: Unknown Punctuation String # 6
STR: :/
SQL: tee c:/trash/test.txt;tee c:/trash/test.txt;tee c:/trash/test.txt;
SQL query:
tee c:/trash/test.txt;
MySQL said: Documentation
#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'tee c:/trash/test.txt' at line 1
The file trash has been created so I know that is not the issue.
Any help will be appreciated thank you.
The tee and notee commands are only available in the MySQL command-line client. They are not handled by the server, so they cannot be used in applications like phpMyAdmin.
I have a project with a MySQL database to which I connected using the Database Navigator plugin.
Now when I open the DB Browser window, select the database and click on "Open DB console" and insert the query
SELECT CAST('2017-08-29' AS DATE);
for one, the IDE highlights CAST as an unknown identifier:
and, additionally, when I try to execute the statement, I get the error
Error executing SELECT statement. You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 1 - Connection: test: 112ms
However, to my knowledge, this is valid MySQL, at least this page suggests so.
I am also able to perform MySQL queries with casts from a python script that builds the connection itself.
What am I doing wrong here? Do I have to configure the dialect for Database Navigator?
I am trying to import Mysql Data taken from Wordpress blog locally on Window 7 system. One way or other it is giving error.
The table wp_commentmeta was giving error. I have deleted all aksimet rows, but still error was coming. So, quit that table and included other tables. But now as well error is coming, which I do not understand:
Error: There is a chance that you may have found a bug in the SQL
parser. Please examine your query closely, and check that the quotes
are correct and not mis-matched. Other possible failure causes may be
that you are uploading a file with binary outside of a quoted text
area. You can also try your query on the MySQL command line interface.
The MySQL server error output below, if there is any, may also help
you in diagnosing the problem. If you still have problems or if the
parser fails where the command line interface succeeds, please reduce
your SQL query input to the single query that causes problems, and
submit a bug report with the data chunk in the CUT section below:
----BEGIN CUT---- eNo1jTsKwzAQRAPu9hRzACEs2S6ynRDCDugXSYlPkCKN+9w+ciBTDY/HjCslFYZVsBreRYaChlJU
W8cDUfjUu2cscpGTpkctSFXArC42gafr0v4+YLeSguvWKKeRcjCMufdZKspbPj2R6rnSyRX7LcZG
3sSV8Trod0DD5Z8vxK4ftA==
----END CUT----
----BEGIN RAW---- ERROR: C1 C2 LEN: 1 2 11 STR: MySQL: 5.5.32 USR OS, AGENT, VER: Win CHROME 5.0.30 PMA: 4.0.4.1 PHP VER,OS: 5.4.19
WINNT LANG: en SQL:
----END RAW---- SQL query: MySQL said: Documentation
#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use
near '' at line 1
The error is from PHPMyAdmin.
Just a warning message for everyone. I remember, I used to use command line more than any tool like phpMyAdmin. Today phpMyAdmin has taken so many hrs. phpMyAdmin was not exporting correctly and all problem was due to that.
Not even phpMyadmin could import its own exported data. I used mysqldump and then mysql ... db < sql.sql and it worked at lightening speed.
#mysqldump -u userName -p --add-drop-table --insert-ignore --result-file downloads/db_name_dump-oct-14.sql db_name
Then downloaded the file using FileZilla,
and on Wins 7:
>mysql -u root -proot wordpress < db_name_dump-oct-14.sql
Remember, do not give semi-colon at last.
Those characters are an encoded parser report. When decoded with scripts/decode_bug.php, it reports:
ERROR: C1 C2 LEN: 1 2 11
STR:
MySQL: 5.5.32
USR OS, AGENT, VER: Win CHROME 5.0.30
PMA: 4.0.4.1
PHP VER,OS: 5.4.19 WINNT
LANG: en
SQL:
So, it cannot report which SQL statement gave a problem. Maybe your import operation was incomplete, due to some incorrect server settings. See FAQ 1.16 in phpMyAdmin documentation include in your kit, or http://www.phpmyadmin.net/home_page/docs.php.
Check the last line of your .sql file in an editor(Sublime Text or whatever you prefer). Does it have strange characters there? ETXNULLNULLNULLNULL etc. Remove that line and retry your import. Worked for me.
Just want to tack on a note that using TextWrangler I could not see the extra characters or text at the end of the sql document; however, I did see a white space, so I selected and deleted it, then saved. When I then imported into the database, the error disappeared! So take heart, Mac users, or rather TextWrangler users, who might have been mystified by the missing characters.
Suddenly importing database backup returns the error below.
The odd thing is that importing an old working copy it works.
If I export it straight afterwards and I try to re-import it the file gives this error.
Looks like it's PhpMyAdmin export that causes issue.
Is there any change in PhpMyAdmin export process that I'm not aware of?
This looks like my problem but the solution didn't work for me.
There is a chance that you may have found a bug in the SQL parser.
Please examine your query closely, and check that the quotes are
correct and not mis-matched. Other possible failure causes may be
that you are uploading a file with binary outside of a quoted text
area. You can also try your query on the MySQL command line interface.
The MySQL server error output below, if there is any, may also
help you in diagnosing the problem. If you still have problems or
if the parser fails where the command line interface succeeds, please
reduce your SQL query input to the single query that causes problems,
and submit a bug report with the data chunk in the CUT section below:
----INIZIO CUT----
eNo1jU0KwjAYRIXuvlPMAWIw0SrNLoTQLvJn0roXF1IQ3Sjo7U0FZ/UYHjM255gVjICRcDYoCEgI
QWWsdUPkP+XoFFou+L5b3x5XmkpGLAy6t2FkONkq+vMFZsjR22puuOwoea2wq9xSGtJisViWnS0X
B7j5/nqT06FXmJ/0u6Bm9c8XSs4hPQ==
----FINE CUT----
----INIZIO RAW----
ERROR: C1 C2 LEN: 1 2 11
STR: MySQL: 5.1.69-log
USR OS, AGENT, VER: Mac CHROME 5.0.29
PMA: 4.0.5
PHP VER,OS: 5.3.17 Linux
LANG: it
SQL:
----FINE RAW----
Query SQL:
Messaggio di MySQL:
#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 1
(I translated what I could in the error as my phpmyadmin is in Italian)
I had the same problem and I found the solution. Open the sql document with any code editor and at the very end in the last line you will see some black strange codes just delete and save should work as it worked for me.
I'm not sure how and why this code been generated when I exported my database.
You are running an outdated phpMyAdmin version. I believe that the fix mentionned in https://sourceforge.net/p/phpmyadmin/bugs/4095/ (for the upcoming 4.0.8 version) will help you.
Direct link to the fix (can be applied to 4.0.7): https://github.com/phpmyadmin/phpmyadmin/commit/b717657de77db0b58179bdbdd88e23d0fc3d7ea6