I have TeXmacs and Octave installed, both working properly otherwise. I have also added the path to octave executable (i.e. C:\Octave\Octave-5.1.0.0\mingw64\bin) to the Windows environment variables and octave runs in cmd/PowerShell terminals and Jupyter with no hassle. However, when running Octave inside TeXmacs through Toolbar > insert > session > octave it gets stuck on Busy..., the same reaction for any other commands as well:
Octave gets stuk on Busy... inside TeXmacs.
This is my environment:
TeXmacs 1.99.9
Octave 5.1.0 (installed through Chocolatey)
Windows 10 version 1809
I would appreciate if you could help me know what is the problem and how I can solve it.
P.S. I have reported this issue in the TeXmacs repo.
#Foad. I wrote an updated Octave plugin for Texmacs. I tried it on Windows, OSX and Linux, works on the systems I have access to. If you are interested to test it, you can download the zipped archive from here https://lists.gnu.org/archive/html/texmacs-dev/2019-12/msg00005.html.
To install it, unzip the archive and copy the octaveX directory in the application plugins folder, alongside all the plugins that come with the standard Texmacs installation. Won’t work if installed in ~/.Texmacs/plugins. If everything goes fine, you should find a new Insert/Session/OctaveX menu (note: I changed the session name). If not, try to refresh the plugin system with the menu Tools/Update/Plugins. If you try it, please let me know, especially if you find troubles. In case I will do my best to fix them.
A fundamental prerequisite is a working octave-cli command in a operating system shell. Should be standard on Linux, may require some additional setup on Windows (environmental variables) or OSX (.bash_profile). You can find some help and more details under the menu Help/Plug-ins/OctaveX.
Concerning the error you found, as far I understand there are some issues with the standard distributed plugin: first, a .octaverc file is missing, so several variables are not initialized, in addition the Windows version calls a not existent file. Moreover the plotting functions are quite old and are not compatibile with Octave newer than version 2 (or maybe 3, anyway a quite old version).
You could try to run the command in
%TEXMACS_PATH%/plugins/octave/bin/tm_octave.bat
from the terminal to see what happens. There is a problem with this plugin and it does not work also on Mac but I do not know enough Octave to fix it. Somehow it does not manage to find the files which are in
%TEXMACS_PATH%/plugins/octave/octave
Please try to modify tm-start.m to look like
d=getenv("TEXMACS_PATH");
if (length(d) > 0)
addpath("tm:polynomial:plot")
tmrepl
endif
In windows, octave should be run using the scripts octave.bat (in the mingw64\bin directory of the octave install) or octave.vbs (in the install directory) for the GUI
You should not run octave.exe directly.
I am trying to install MySQL on a Windows 10 PC. I downloaded the installer package and followed those steps
Went to https://dev.mysql.com/downloads/windows/
clicked on "MySQL Installer"
Scrolled to Generally Available(GA) Releases section
Clicked on "Windows (x86, 32-bit), MSI Installer" (mysql-installer-community-5.7.21.0.msi) and it started the download.
Once the download was complete, I double clicked on the installer and it gave a usual pop-up for any installation like,"Do you want this app to make changes to your device?" after clicking on "yes" for the answer to this question, it shows "Please wait while Windows configures MySQL-Installer-community" like below screenshot.
And then it keeps showing this installation progress bar for a very long time. Like more than 7-8 hours and the installation never completes
So it seems something is wrong as I don't think MySQL installation needs this long time. I tried to restart my computer and then delete any files related to MySQL from my computer and then started the whole process of installation again. But no luck yet
Anyone has any suggestion on this or did anyone face this kind of issue before? If so, is there a fix or a work around for this?
ok. So finally this is how I resolved my issue. And I found the solution at https://bugs.mysql.com/bug.php?id=82004 . The solution to this problem is to close an open "Windows installer" (the one using 0 memory and CPU) via task manager and the installation should begin running as expected.
Alternative solution: Use an administrator command prompt to run the MySQL installer on Windows 10. Details:
(Note: if you have any problems in the following steps, you can try to restart your computer. Then restart the steps.)
Right-click the Start/Windows icon in the bottom-left corner of Windows.
Click: Windows PowerShell (Admin).
A window asks: Do you want to allow this app to make changes to your device? Click: Yes.
Change to the directory with the MySQL installer. For example, if you downloaded the MySQL installer, type something like:
cd C:\Users\my_username\Downloads\
(Note: To save some typing, you can type a few characters, and then press the tab key, to make Windows show you various auto-completion options.)
Run the MySQL installer. Type something like the following command---make sure to include the period and backslash at the beginning---and press Enter.
.\mysql-installer-community-8.0.11.0.msi
Note: The idea of using an administrator command prompt came from John Geffe, in the link below, which was cited in the answer written by the original poster (user8425592):
https://bugs.mysql.com/bug.php?id=82004
Bug #82004 MySQL Installer freezes during "Please wait while Windows configures..." phase
[6 Feb 3:58] John Geffe
To get past this problem I had to run the .msi installer from an the
Administrator command prompt. Hopefully this helps someone in the
future.
[19 Apr 18:14] Jim McCauley
John Geffe: Thanks! Your note on installing as an administrator seems
to have taken care of the problem.
this did the trick for me: https://ao.ms/mysql-community-server-msi-installer-hangs-on-windows-10/
run cmd (commandline) as Administrator
cd to your location that you downloaded the .MSI to
run the “msiexec” commandline tool with option “/i” as follows:
msiexec /i [replace with file name]
example: msiexec /i mysql-installer-community-5.7.20.0.msi
Another thing that worked for me was running the installer in compatibility mode for previous version of Windows. You can try that as well.
Go to the link you provided (the first one) and try installing MySql Workbench. That is the version that is commonly used, and one that I verified works in Windows 10. Here is the link: https://dev.mysql.com/downloads/workbench/
Obviously, make sure you choose the right architecture, have the correct permissions to install software, and have enough space on your hard drive, or on the machine you are installing to.
Please install "Update for Visual C++ 2013 and Visual C++ Redistributable Package" from Microsoft Site "http://download.microsoft.com/download/0/5/6/056DCDA9-D667-4E27-8001-8A0C6971D6B1/vcredist_x64.exe"
Please look here at https://support.microsoft.com/en-in/help/3179560/update-for-visual-c-2013-and-visual-c-redistributable-package
Yes, I also got the same problem on my Windows 10.
Followed the Powershell solution and it worked.
Just repeat the above:
Click Start on bottom left corner
Scroll down the application list until Windows Powershell
Select Windows Powershell again on sub-menu
Type in cd (to change to your .msi folder)
Type .\xxxxx.msi (this is the installer file name)
All good.
Once you install the above package run the installer again and do the steps. You will be able to install the mysql-installer-community-5.7.21.0 for 64 bit windows 10
closing Windows Installer instances using 0 memory and CPU helps me to get past this problem.
For me on Window-10 machine, there was a problem with the "mysql-connector-net-8.0.11.msi". I was not able to uninstall this and hence all my subsequent efforts to install MySQL were failing. I did the following to overcome this issue.
Re-installed "mysql-connector-net-8.0.11.msi" Get it here and used the 'Repair' option
Installed the "mysql-installer-web-community-8.0.11.0.msi"
These two things solved my problem. Hope this helps.
The reson is your antivirus didn't allow the mysql, so Disable protection(until restart),( in your task bar right side click the arrow and right click to antivirus,to select (Disable protection(until restart)).then restart your computer again install mysql installer it will work.
For this issue just run .msi file in command administration like
E:\mysql-installer-community-8.0.20.0.msi\
follow this link:
https://kb.foxitsoftware.com/hc/en-us/articles/360040660611-How-to-install-MSI-from-command-line-with-administrator
In my case, an upgrade to 5.7.29 on Windows 10 via mysql-installer-web-community-8.0.20.0.msi, the install froze "backing up the database". The log tab showed no activity for 8 minutes. I clicked on cancel, then at the "are you sure" prompt I declined to cancel, and all of a sudden the install was working again. Very strange...
I encountered the same problem, preparing but can never get started. Tried to close other installation programs with no use, but I took the inspiration and proceeded with restart the computer and it worked nicely. So, I think the issue is to get rid of everything that could be in the background running that somehow interferes the installation.
You should run the installer as an administrator but this specific installation may not provide an option for this. Some might have it but it's most likely that it's unavailable for many users. So you should run it in cmd or powershell. And don't forget to run these shells as an administrator coz that's the whole point here. Once there, navigate to the installer's location which usually is in the downloads directory and run it using this command ./name.msi
Make sure no other ongoing installation of this instance. Close it if there exists one and undo the changes made by uninstalling it from the panel. If still facing difficulties, try restarting your machine and repeat this procedure...
Have fun
I had the same Problem, A simple solution is to give access the "SYSTEM" to the msiserver...I know, this is hard to understand what I am saying....You can Simply see this Video and you will definitely find the answer https://www.youtube.com/watch?v=6SdXMjXmnUk, It is a matter of just 3 minutes...
I encountered the same issue of taking too much time to install mysql community installer.I tried 3 times by cancelling the installation and restarting to perform a new installation.But had same issue. I tried 2 things
First to end all tasks associated with installation which I performed for installing mysql using Task Manager
Reinitiated the installation but didn't solved my issue.
Secondly tried to install through Windows Powershell as admin, which solved the problem.
Click on the Windows icon/start on the bottom left corner.
Right click and select the option Windows Powershell (Admin).
A pop up window will ask Do you want to allow this app to make changes to your device?....Click Yes.
Now cd to your downloads folder/wherever you downloaded the .msi file (For example cd C:\Users\MYPC\Downloads).
Once you reach to the folder where the .msi file is kept, run the following command.
.\mysql-installer-web-community-8.0.23.0.msi (Note: this is the version which I have downloaded, modify as your version).
I'm trying to install Expect for Windows using ActiveTCL and I'm having a helluva time. I understand I need to use teacup/teapot? Is there any documentation at all? I'm trying to run teacup and it says "can't create directory" on my network drive, it's trying to install in a random directory that I can't seem to change..
I've spent a day trying to figure out how to install, what I thought would be, a simple program...
I am convinced that Expect does not work on 8.6, at least as advertised by the documentation on ActiveTcl's site. I have spent the last three hours trying to get it to work without success. I uninstalled Tcl 8.6, and downgraded to 8.5 (32 bit). Once that was done, I opened the "Tclsh" application and ran the command "teapot install Expect" That is probably not the solution you are looking for, but that's what I did.
Run command "teacup install Except" in prompt.
You can type "teacup help" to find more information.
Yes! Thanks for this post #Sean Farley! Adding Expect to ActiveTcl was a clear as mud. I agree that it does not seem to be supported in Tcl 8.6 or 64-bit Tcl 8.5. After installing & uninstalling both of those the 32-bit version worked (also I think it's "teacup install Expect" to install).
I knew this day would come, so I guess it is here. (P.S. I am on windows XP).
I am trying to use this program here. I installed it fine, but it doesnt seem to work when I type in equations. So I went back to the site and it says I need JRE version 5.0 or above, (check). Then it also says I need dvipng, which I dont think I have.
So I went to the site it tells me to, (here), and I downloaded the most recent one, "dvipng-1.14.tar.gz". I unzipped it and I have it all sitting in one directory.
Ok... now what?
Im afraid I need guidance on exactly how to proceed here. The readme and installation instructions say to run "./configure", then "make", etc, I opened the command prompt and did all that but doesnt recognize. I have never had to build in this way, I always used an IDE for compiling C++ programs that I write myself. (Anyway, why am I even having to make an exe why dont they just make one and let us download that?)
Very confused as to what I need to do here, appreciate some step by step help.
Thank you
Even though Mohammad's problem was solved in the comments, I'll have a go at answering his question:
To run a build system that uses ./configure, you need something that can run shell scripts, as well as the usual suite of unix tools that the script expects, plus a compiler that behaves in the standard sort of way.
The two projects that I know of that do this are cygwin and MSYS. cygwin is aimed at creating a full POSIX environment on windows, while MSYS is an add-on to MinGW that aims to provide just the parts needed to run a ./configure script and build a program.
So I thought I would install Lazarus/Free pascal -latest version from the sourceforge website.
Downloaded the win32 version and install on my XP machine couple of nights ago.
Problem is, it can't seem to find any of its own files.
From the first and every subsequent run it comes up with an error which says it can't find its system.ppu file relating to win32.
I just ignore that error and it seems to still run.
I tried to make a simple calculator application and it couldn't even seem to find the system files or files in the project directory. After battling these problems and setting every single path I could find in all the setups to every directory I could find it eventually compiled and run the program - once, not been able to make it do it again.
I also tried to make a user component library following the instructions on the web and that won't work either because, you guessed it, it can't the files. This time it gives an error saying it can't find a Ttreeview component, despite not even using that component in the library.
Being able to follow search paths is pretty fundamental stuff that they don't seem to have mastered.
Anybody managed to get a working system going, or any tips to sort these problems out?
Did you install in the default directory c:\lazarus? I thought there was an issue with installing to another directory, especially if the path contains spaces.
Nine times out of ten, its the old config of an earlier Lazarus attempt, that still lingers somewhere in the "local app" part of the profile.
If nothing else helps uninstall Lazarus, download Lazarus CodeTyphon edition, and run install as admin.