I have a tablix in SQL REPORTS (SSRS) that has many grouped items.
It fits roughly 3.5 groupped item per page when printnig, however I dont want the groups to be split up over the 2 pages, I want a pagebreak to happen whenever the group needs to be split.
I dont want to have it 1 group per page either, I know there is an option for that.
At the bottom of the report builder, you will see two boxes, Row Groups and Column Groups. Select the Column Groups drop down, click "Advanced Mode" and then in Row groups highlight "Details". In Properties under the "Other" section, select "True" for Keep Together. and save. This should work.
Note: I know this is old hope this helps people starting out though.
Modifying the property Other -> KeepTogether of the outermost row group desired to keep within a single page worked for me using Report Builder 3.
My KeepTogether values for each Row Group
Notice in my example, KeepTogether is false for table1_Group1. I don't want to keep my entire dataset together. Instead I want to keep only individual groupings of that dataset together.
In order to see the Properties panel, enable the Properties checkbox under the Show/Hide section of the View tab of the Ribbon.
My View settings
Probably the best place to start is the group-level KeepTogether property.
Indicates whether to keep all sections of the data region together on
one page.
I have just worked through 3 similar reports that were all suffering this issue.
It was only when I marked the group row AND the detail row to get the report to force a page break and keep the pages together.
Interestingly, I can then set the DETAIL BACK to false and the report still functions correctly. I have no explanation as to why, but this was repeatable.
I am using SQL Server 2016 Report Builder (the red one)
I tried all options about that. When I have a more difficult group, it sometimes happens, that the group will be split across pages. Even though setting "Keep Together" property to True.
My solution is:
don't use multiple rows
use one row with rectangle
to rectangle import TextBoxes and fill them with expression "=Fields!Column.Value"
Related
In a new SSRS 2008 report, I have one main tablix and I will be embedding 5 existing tablixes into the one main tablix. For each row in the main tablix, I will be embedding 1 of the tablixes. There will be one dataset used and the same parameters are used between the 5 existing embedded tablixes. One of the parameters is to allow the user to select report number 1,2,3,4, or 5 which is an integer value. The default will be to select all the reports.
The selection of which reports will be displayed will be from the main tablix on row visibility for each embedded tablix. Each tablix will be set to 'add a page break after'. This works fine except the last page of the last report will always have a final blank page. I basically do not want that final page break to appear.
Thus is there a way to not have the final page break show up? Could I use some kind of condtional page break logic? If there some kind of a way to determine what the highest number report is that is selected and not allow a final page break to occur in that situation. If so, how would you setup that code?
If not, can you tell me a way that will solve this issue and show me the code, show me the screen prints, and or point me to link(s) that will tell me how to solve this problem?
There is two option for page break...One is Start of group and another one is end of group. Tick the start of a group only ...don't select end of a group. Let me know if you need any more help on this...
For each tablix you set "add a page break after", you need to select the tablix and go to Properties pane and expand page break section. Under the page break section you can enter an expression for the Disabled property.
Assuming your SelectReportNumber parameter is single select and Null displays all reports, the expressions for first four tablix should be like:
=IIF(Parameters!SelectReportNumber.Value <> Nothing,True,False)
Last tablix should not have page break in any case.
If you need multi select then you need to modify the expression for determining Max of the parameter and disable that page break only.
I have inherited an SSRS report which is basically a single table (tablix), one row of which contains a subtable. When the subtable is less than 10 rows, the report fits on a single page. However, when there are more than 10 rows, the report inserts a page break before the subtable and starts a new page, leaving over half of the first page blank.
What the users would like is for the subtable to split across the page break; that is, have the first 10 rows on page one, then start page 2 with a header row for the subtable and continue it.
Is there a simple way to achieve this or is it a case where the report really needs rewriting from scratch?
FYI, we are using SSRS 2012.
In inner tablix make sure keep together on one page if possible is unchecked.
Other way you can handle is remove the inner tablix and incorporate the same functionality in the main table.
After further attempts, I managed to get the table to split. The problem was that the row did not contain only the tablix, but also had textboxes to either side. It seems these were kept together as a group.
FYI, the more interesting problem was getting the headers onto the 2nd and following pages in the sub-table. This MSDN article explained the use of advanced settings to achieve this.
I was wondering if there was a way to create a directory listing report in ssrs and if so, how would i go about creating it.
I'm mostly familiar with creating tabular and some somewhat complex reports, but nothing like this; so any help would be extremely useful.
Here's a sample of how the report might look.
Thanks!
Addendum: The content on each page needs to be grouped by Department & Sub-Department.
I made a mistake on the sample report; where it says Department Subtitle it should say sub-department.
Here's one way I've seen it done.
For a 3 column look, create 3 tables/list with the same dataset and set visibility for details group to:
=IIF(ROWNUMBER("YourDataSet") mod 3=1,FALSE,TRUE) <--Table1
=IIF(ROWNUMBER("YourDataSet") mod 3=2,FALSE,TRUE) <--Table2
=IIF(ROWNUMBER("YourDataSet") mod 3=0,FALSE,TRUE) <--Table3
I think your problem is an addition to this question here.
I did a simple test that imitates your situation. Here is how to do it:
Set the report to 3 columns via Report properties. Adjusted the width of each column so that they fit in 1 page of paper.
Add a List control to the first column. Put Text Box controls inside with the required data fields. The List control will repeat for each Listing record.
Create groups for Department and Sub-Department via Row Groups pane. Rearrange the groups so that they will appear above the List control.
Right-click on Department group (or Sub-Department group) and add Page Breaks.
Preview (Should get a result pretty close to what you want)
I'm using a table on my report to present the data. Since it was a lot of data and I wanted to print the report on a A4 page, I split each row into 3 different rows.
My problem is when the report goes to the second page, I want it to break before or after the 3 rows.
example:
name age
address
contact
name age
address
contact
name age
address
* page break *
contact
this is what normally happens. I want to ensure that the page break only happens on the lines.
There are multiple strategies to follow:
The KeepTogether is useful in this case
If you want it to fit on one page only try adjusting page margins, padding, font size, line height to make the report render more compactly
Another alternative is to create a table group on the person, and from the group properties (edit group) check the page break at end property. this way you can have each group on a separate page
Hope this helps
I'm ended up creating a subreport to represent each item.
I looked for the KeepTogether property but that's probably only for reporting services 2008 (I'm using 2005).
If you have the table in a subreport, you must also Right Click -> Format Object -> Uncheck Keep object together.
This was the step that did it for me after I unchecked Keep object together on the table and the subreport details.
I had the same problem, tried 'Keep together' and it didn't work. After a long time of changing and trying many things the one thing that did the job was reducing the bottom margin of a page.
So I've got various reports that consist of a DataSet rendered in a Tablix... pretty garden variety stuff. There is a property for the Tablix control named RepeatColumnHeaders, which I have set to True for each report in question. The explanation for this property states “Indicates whether column headers are repeated on each page on which part of the data region appear.” Sounds pretty straightforward, but on some reports it works and on others it does not. I can't seem to find what's different about the reports that might affect this. On one report where the headers do repeat, there is some fairly arcane grouping mojo, but in an example where it doesn't work the Tablix only has one level--no grouping. I would expect the multi-nested one to be the problem, not the flat one.
Maybe it's a different problem altogether. I threw together a simple Tablix rendering SELECT * FROM Foo, accepted all the default values, which results in RepeatColumnHeaders being set to False, and lo and behold the column headers do repeat for that report... Grrr.
Any insights greatly appreciated.
It's a bit wonky from what I've managed to dig up. In your grouping pane, select advanced mode, then select your outermost static row. You should then see the "RepeatOnNewPage" property.
Update: finding Advanced Mode:
The comment by #HCL links to the other answer by #user359904, that has the info on how to find and enter Advanced Mode:
Select the tablix
Below the report are "Row Groups" and "Column Groups", all the way to the right of "Column Groups" is a small downward arrow.
Click the arrow, choose Advanced Mode.
I found a solution that works for me. Vinny's answer led me to it.
Thankfully, I didn't have to recreate my tablix. I had three rows that made up my tablix header. I added three rows outside of the highest level group. These rows are not bound to any group. I modified the rows so that they exactly duplicated the header rows I had in my highest level group. I set the KeepWithGroup property to "After" and the "RepeatOnNewPage" property to true for each of these header rows. I tested the report. The header appeared at the top of every page but due to the duplication of the header rows both inside the highest level group and above the highest level group, the header repeated twice at the top of the first page and at every section break. I deleted the header rows in the topmost section and the duplication went away. Headers repeat correctly at the each break of the highest level group and at the top of each page. There are no header rows in the highest level group.
To set KeepWithGroup and RepeatOnNewPage: Select the tablix. In the group box below the design pane, click on the down arrow to the right of the text that reads "Column Groups" and make sure "Advanced Mode" is checked. Click the first static row and set the KeepWithGroup property to "After" and "RepeatOnNewPage" to true. Do that for each of the rows that comprise your header.
Sorry to beernuts for un-marking your response as the answer; I hope you get to keep the rep points.
The plot thickens. In three tests I found a 1:1 correlation between using the wizard to create a report and getting the desired header behavior, as well as between not using the wizard and not being able to achieve the desired behavior. From there I diff'd the rdl files for a working and non-working example and found this element:
<RepeatOnNewPage>true</RepeatOnNewPage>
In the document at:
Report > Body > ReportItems > Tablix > TablixBody > TablixRowHierarchy
> TablixMembers > TablixMember
I added the same to the non-working rdl and the headers started repeating.
I cannot, however, find a setting, property, etc in the designer that toggles this. It does not seem to correspond at all to the obvious properties as described previously. Is it just an artifact of the wizard? Fortunately it's a fairly easy work-around as I couldn't face recreating a dozen reports using the wizard.
Your post is still being used ;) Thank you all. I built upon what you provided to come up with a solution to restore repeating header rows. I did not have to use the Advanced mode, just some insight... I had two title rows outside all row groups with no column groups. Here is what I did to get the two title rows into the tablix header:
Right click on one title row and "Add Group (Column Group)", Parent Group
Group by '1' (this group will later be deleted so it doesn't matter what you put there
Click OK and the a Header row is added.
Merge all columns in the new header row
In the column group pane, right click on group just created and "Delete Group", select box for "group only" important
Now you have header row you can insert row above or below to add more header lines.
Move your title rows into the new header rows and delete your old title rows.
Last... make sure you check the Tablix property to "Repeat Column Headers on each page"
It worked well and easily repeatable (I had many tablixes).
Sincerely, Alan
In your reports where the header doesn't repeat, did you delete the default header row in the tablix at any point? Once I did that, no matter what setting I tried, the header in the tablix wouldn't repeat. I had to re-create the tablix to get it to work.
It's now the year 2014 and I'm running 2012 version and I used your post to solve my problem - one that experienced SSRS developer in our shop didn't know how to solve (I'm just a newbie). Thanks so much for contributing your solution - it seems to be a timeless issue.
I am adding some screenshots from my SSRS 2012 server..
Now, click on the "(Static)" under "Row Groups" and presss F4.
Also read
TechNet - SSRS: How to Repeat Headers on Each Page