I'm using a table on my report to present the data. Since it was a lot of data and I wanted to print the report on a A4 page, I split each row into 3 different rows.
My problem is when the report goes to the second page, I want it to break before or after the 3 rows.
example:
name age
address
contact
name age
address
contact
name age
address
* page break *
contact
this is what normally happens. I want to ensure that the page break only happens on the lines.
There are multiple strategies to follow:
The KeepTogether is useful in this case
If you want it to fit on one page only try adjusting page margins, padding, font size, line height to make the report render more compactly
Another alternative is to create a table group on the person, and from the group properties (edit group) check the page break at end property. this way you can have each group on a separate page
Hope this helps
I'm ended up creating a subreport to represent each item.
I looked for the KeepTogether property but that's probably only for reporting services 2008 (I'm using 2005).
If you have the table in a subreport, you must also Right Click -> Format Object -> Uncheck Keep object together.
This was the step that did it for me after I unchecked Keep object together on the table and the subreport details.
I had the same problem, tried 'Keep together' and it didn't work. After a long time of changing and trying many things the one thing that did the job was reducing the bottom margin of a page.
Related
In a new SSRS 2008 report, I have one main tablix and I will be embedding 5 existing tablixes into the one main tablix. For each row in the main tablix, I will be embedding 1 of the tablixes. There will be one dataset used and the same parameters are used between the 5 existing embedded tablixes. One of the parameters is to allow the user to select report number 1,2,3,4, or 5 which is an integer value. The default will be to select all the reports.
The selection of which reports will be displayed will be from the main tablix on row visibility for each embedded tablix. Each tablix will be set to 'add a page break after'. This works fine except the last page of the last report will always have a final blank page. I basically do not want that final page break to appear.
Thus is there a way to not have the final page break show up? Could I use some kind of condtional page break logic? If there some kind of a way to determine what the highest number report is that is selected and not allow a final page break to occur in that situation. If so, how would you setup that code?
If not, can you tell me a way that will solve this issue and show me the code, show me the screen prints, and or point me to link(s) that will tell me how to solve this problem?
There is two option for page break...One is Start of group and another one is end of group. Tick the start of a group only ...don't select end of a group. Let me know if you need any more help on this...
For each tablix you set "add a page break after", you need to select the tablix and go to Properties pane and expand page break section. Under the page break section you can enter an expression for the Disabled property.
Assuming your SelectReportNumber parameter is single select and Null displays all reports, the expressions for first four tablix should be like:
=IIF(Parameters!SelectReportNumber.Value <> Nothing,True,False)
Last tablix should not have page break in any case.
If you need multi select then you need to modify the expression for determining Max of the parameter and disable that page break only.
I have inherited an SSRS report which is basically a single table (tablix), one row of which contains a subtable. When the subtable is less than 10 rows, the report fits on a single page. However, when there are more than 10 rows, the report inserts a page break before the subtable and starts a new page, leaving over half of the first page blank.
What the users would like is for the subtable to split across the page break; that is, have the first 10 rows on page one, then start page 2 with a header row for the subtable and continue it.
Is there a simple way to achieve this or is it a case where the report really needs rewriting from scratch?
FYI, we are using SSRS 2012.
In inner tablix make sure keep together on one page if possible is unchecked.
Other way you can handle is remove the inner tablix and incorporate the same functionality in the main table.
After further attempts, I managed to get the table to split. The problem was that the row did not contain only the tablix, but also had textboxes to either side. It seems these were kept together as a group.
FYI, the more interesting problem was getting the headers onto the 2nd and following pages in the sub-table. This MSDN article explained the use of advanced settings to achieve this.
I have a tablix in SQL REPORTS (SSRS) that has many grouped items.
It fits roughly 3.5 groupped item per page when printnig, however I dont want the groups to be split up over the 2 pages, I want a pagebreak to happen whenever the group needs to be split.
I dont want to have it 1 group per page either, I know there is an option for that.
At the bottom of the report builder, you will see two boxes, Row Groups and Column Groups. Select the Column Groups drop down, click "Advanced Mode" and then in Row groups highlight "Details". In Properties under the "Other" section, select "True" for Keep Together. and save. This should work.
Note: I know this is old hope this helps people starting out though.
Modifying the property Other -> KeepTogether of the outermost row group desired to keep within a single page worked for me using Report Builder 3.
My KeepTogether values for each Row Group
Notice in my example, KeepTogether is false for table1_Group1. I don't want to keep my entire dataset together. Instead I want to keep only individual groupings of that dataset together.
In order to see the Properties panel, enable the Properties checkbox under the Show/Hide section of the View tab of the Ribbon.
My View settings
Probably the best place to start is the group-level KeepTogether property.
Indicates whether to keep all sections of the data region together on
one page.
I have just worked through 3 similar reports that were all suffering this issue.
It was only when I marked the group row AND the detail row to get the report to force a page break and keep the pages together.
Interestingly, I can then set the DETAIL BACK to false and the report still functions correctly. I have no explanation as to why, but this was repeatable.
I am using SQL Server 2016 Report Builder (the red one)
I tried all options about that. When I have a more difficult group, it sometimes happens, that the group will be split across pages. Even though setting "Keep Together" property to True.
My solution is:
don't use multiple rows
use one row with rectangle
to rectangle import TextBoxes and fill them with expression "=Fields!Column.Value"
I was wondering if there was a way to create a directory listing report in ssrs and if so, how would i go about creating it.
I'm mostly familiar with creating tabular and some somewhat complex reports, but nothing like this; so any help would be extremely useful.
Here's a sample of how the report might look.
Thanks!
Addendum: The content on each page needs to be grouped by Department & Sub-Department.
I made a mistake on the sample report; where it says Department Subtitle it should say sub-department.
Here's one way I've seen it done.
For a 3 column look, create 3 tables/list with the same dataset and set visibility for details group to:
=IIF(ROWNUMBER("YourDataSet") mod 3=1,FALSE,TRUE) <--Table1
=IIF(ROWNUMBER("YourDataSet") mod 3=2,FALSE,TRUE) <--Table2
=IIF(ROWNUMBER("YourDataSet") mod 3=0,FALSE,TRUE) <--Table3
I think your problem is an addition to this question here.
I did a simple test that imitates your situation. Here is how to do it:
Set the report to 3 columns via Report properties. Adjusted the width of each column so that they fit in 1 page of paper.
Add a List control to the first column. Put Text Box controls inside with the required data fields. The List control will repeat for each Listing record.
Create groups for Department and Sub-Department via Row Groups pane. Rearrange the groups so that they will appear above the List control.
Right-click on Department group (or Sub-Department group) and add Page Breaks.
Preview (Should get a result pretty close to what you want)
I've been fighting with SSRS for too long now on what should be a simple matter. I'm hoping someone can help me see a solution.
I have a report which has a number of profiles, and each profile has a large number of data sections. The data sections (various tables and charts) are not related to each other in any way other than that they "key" back to the parent profile id.
The goal (which seems simple) is to have a header on each page with the profile information, and then have the data sections (each formatted completely differently) laid out.
The first problem we encountered was that for some reason SSRS2008 does not allow a tablix cell to contain another tablix with a different dataset (why it can't just require a filter based on the parent grouping is beyond me). The recommended workaround for this shortcoming is to either combine all data into a giant dataset (not possible here, data sections are too numerous and varied) or to embed subreports and pass in the parameters. While option number two increases the "work" needed to print a large number of profiles, we proceeded to implement this and it does work.
The problem comes in on the main tablix (the one containing the subreports) that has a static row header group set with "RepeatOnNewPage = true". This setting allows the header to show on every page as desired... except for subreports the span multiple pages, where the header is incorrectly ommitted.
For some reason, when the subreport spans multiple pages, the header of the parent tablix is not repeated! This is driving me insane as it would seem that a couple bad design decisions in SSRS has put me in a situation where I can't create the report I want... headers works without subreports, but I need subreports in order to "join" the data sections to the profile.
This would seem to be a simple and common requirement... after all, it's a report that is being migrated from a decades old reporting system. I've scoured StackOverflow and Google without success... I've seem a number of questions/answers about page breaks, but nothing that suggests a solution to this problem with subreports.
I'm posting this in case I'm missing something. If anyone has any suggestions at all, it would be much appreciated.
A very clean and simple way to repeat the column header on each page
http://www.a2zmenu.com/Blogs/BI/Tablix-headers-not-repeating-in-SSRS-2008.aspx
We've solved our problem... although not in the most ideal way.
The Page Header (of the "master" report, not the subreports) seems to be the only way to consistently have a header section.
We implemented a solution based in large part on this blog posting:
Maintaining State in Reporting Services 2008
We modified slightly from the blog post, removing "id" from the methods and including a GUID to ensure the report values are not mixed up even if the user runs several copies of the report at the same time. (When using shared variables, remember that they are global to the report running across execution instances and across users on the report server, so a lot of care needs to be taken when they are used!)
In the report body we have a hidden text block that calls:
=Code.SetValue("xxx",Fields!Field1.Value) & Code.SetValue("yyy",Fields!Field2.Value)
and in the report page header we reference these as (for example):
=Code.GetValue("xxx")
This works because the body is calculated before the page header, even for Page 1.
Still, in the end it is a hack for something that should be in Microsoft's product, given that they have poured years of development into this product! Why we cannot have nested tablix's and easier to use headers is beyond me... again this is upgrading a report from a program from the early 90's which did all this without problem. At the very least, give us report variables that can be retrieved and set as the report is processed!
Regardless, things are as they are... we've tested the solution with shared variables and it seems to be working very well. We're going to run stress tests to make sure it's implemented correctly, I'll post something here if we find any further problems.
(And if anyone knows of some other way to get consistent header rows on pages, even when there are detail rows with large heights, please share...)
We have faced exactly the same problem during implementation of customer demands on SSRS Reports,
And did try a lot of things which all of them resulted with failure.
In our case,
Main Report has 4 subreport. Each SubReport should be started in new page. And also when new subreport begins, page header should be changed dynamically based on Subreport in body in current page.
Also one of SubReports which was SubReport3 has another case. Basically Main Report was running based on Dealer level. But Customer wants SubReport3 to run for each SubDealer related with #Dealer parameter. Also Customer wants to see each SubDealer data started in New page inside SubReport3.
As a result, we found different workaround as follows.
We created Page Header to Main Report. (Report Menu -> Add Page Header)(As #codinginthevoid said it is most consistent way)
We putted 4 subreports inside separate tablix. We added new column to each tablix. That column in each tablix visiblity = false, width of that column can be as small as possible, then created placeholder inside of that column, wroted down expression as follows:
If expression is in Tablix1, expression was ="Tablix1", if in Tablix2 then "Tablix2" and etc.
Then started design page header for Tablix1, each report item in pageheader that was putted for Tablix1 has visibility expression as follows:
=ReportItems!Tablix1_HiddenTextbox1.Value IS NOTHING
then applied same thing for Tablix2 and etc.
In the end, there were lots of textbox in PageHeader of report and some of them position was completely same, overlapped, But when reports is being rendered, each of those textboxes is being shown it is related page with related subreport.
I have encountered the same problem as well. What I found was that the way to solve the issue was to de-normalise the data, adding a 'Record Type' field to identify whether the row was a parent or a child.
There were two sub-tables in my tablix, both displaying detail data linked to the outer grouping. If I set the headers of the sub-tables to repeat on every page (using the Advanced arrow > Static Properties > KeepTogether = True, KeepWithGroup = After, RepeatOnNewPage = True) then one of the sub-tables would display correctly, however the parent table's repeating header would just disappear.
To keep a long story short, this was a massively annoying problem to solve. The solution is simple, it worked for me, but may not work for everyone.
Linked below is a SSRS2008 example RDL that connects to localhost and has an example of the problem I had and also the solution I implemented. Please feel free to use it if you find it useful!
(I would've posted it on here but Stack Overflow fails for code blocks it seems)
http://www.sqlservercentral.com/Forums/Topic1111567-1633-1.aspx?Update=1