UPDATE: In an effort to give a more clear question. How do I use the Google Console API key with the Google Maps Geocoding Web Service API? At the moment the request comes back as denied, when I specify the key but even though it failed it is logged in the Google Console API site's reports section.
Original Question
I have an existing app that has been modified to start geocoding address at the time they are entered (for use within the app on a Google Map). The volume expected for this is expcted to be within the free offering's limites and does not require a key at this time. However now I have to geocode all of the existing addresses. I have a small windows app (C#) that will loop through them one at a time, request they be geocoded (via https://maps.googleapis.com/maps/api/geocode/json) and store the results in the database. However I keep running into the query limit. To help alleviate this I've setup an account on Google API Console (https://code.google.com/apis/console/) so that I get go over the limit and just be billed for the overages.
The problem is in order to do utilize this billing alternative I have to provide a Console API Key to the request, but every time I do so I get a response back with a status of REQUEST_DENIED.
My URL looks like this
https://maps.googleapis.com/maps/api/geocode/json?address=1600+Amphitheatre+Parkway,+Mountain+View,+CA+94043&sensor=false&key=123abc
If I take off the key it works fine, but with it on it fails. Now, I have seen other questions similar to this when looking around but can find no answer to the issue.
I've tried various alternate domains including maps.google.com, maps.googleapis.com and maps-api-ssl.google.com all seem to have the same problem from what I can tell.
Here's what I've been able to find out so far:
The service is listed in the Google Console API's site as Google Maps API v3, (there is a separate entry for v2) so I don't think it's a problem with keys no longer being mandatory in v3.
I know the requests are getting through and being correctly logged against this API key because with each failed attempt the request count goes up by one on the Reports tab of the Google APIs Console.
*I know it's not a problem with it not being accessed via a web page because the Console API explicitly lets you generates keys intended for Server/Service use and you can restrict access to them via IP address, not URL Referrer.
*I've also verified the parameter syntax as it's outlined on this page, as are other usage
*These seem to be generic to the Console API system but there is no mention of exceptions to these practices when used for the Google Maps API.
I even tried to contact Google but apparently they don't offer support over the phone (I was hoping to be done with this today but that's not looking likely).
It seems the key is not necessary anymore, since it doesn't increase your limit of free geocodings.
It was a legacy of v2, but geocoding API v2 was fully deprecated last March, 8.
If you need to use more than the free limit, I think you must adquire the Enterprise license.
Regards,
Eduardo.
I ran into this same issue and solved it by enabling the Geocoding API on the Google apis dashboard. Even though I'm using the Google Maps JavaScript API v3, it still required me to enable the Geocoding API as well. Make sure you understand the google's quota limits and billing system before enabling any API access. Hope this helps!
Late to this answer, but just in case anyone else has issue. Billing needs to be setup first and like Dylan said you also have to enable Geocoding API(this got me). At least I did for my locations app that shows multiple store location addresses.
Related
my question: Is there any Google API / SDK I can use to be able to dynamically add "HTTP referrers (web sites)" (assign domains) to maps API key ?
Background
I'm building a web-application portal that will allow anyone to create a business website and assign a custom domain to it.
On that generated website customer will have google maps map pointing to address of their business.
Customer has an option to add custom domain to their business website created by my web-application (by CNAME to the my web-application)
Desired feature is that once the domain background job will get triggered that will add that domain/host to list of restricted domains/hosts for my Google Maps Api key so that their domain will be able to read google maps on their domanin
note: I Have cron job DNS lookup validation check implemented to ensure that domain is really assigned to the domain
live example
here is website generated by customer on my web-application http://sbs-sos.sajtka.sk/ he assigned a domain and pointed CNAME http://sbs-sos.sk/
Reason why the google map works is because I manually white-listed their domain. I need to automate this
please aware portal is not fully launched so many bugs are happening
The feature request to manage API keys restrictions via SDK was submitted in Google issue tracker in 2016:
https://issuetracker.google.com/issues/35829646
Currently, there are no any official SDK for that. However, the last update from Google says that they released experimental API to programmatically manage your API Keys and their restrictions.
The best way to handle thousands of authorized domains is to use an API to programmatically manage your API Keys and their restrictions, and we have recently launched a new service that allows you to do this.
This API is still in Alpha. If you are interested in becoming a Trusted Tester for this service, you can use the following form to sign up, please read the instructions carefully:
https://forms.gle/qx2SMcarWCAsbWVp7
Please note that this API is not part of the Google Maps Platform. After you fill out the form, you will be contacted by the API Keys API team with instructions on how to get started, and how to receive support.
API Keys API is currently free of charge. However, please note that use of Cloud Endpoints may be subject to charges at high traffic volume. You can check the pricing sheet here:
https://cloud.google.com/endpoints/pricing-and-quotas
I would suggest joining Trusted Tester program and try out this API.
I hope this helps!
I want to use this get in order to get Lat/Long for an address.
Currently, it always returns REQUEST_DENIED. This API project is not authorized to use this API.
I have ensured that my key is enabled, and currently, it has no restrictions for testing purposes. This is the url, with the actual key replaced with 12345.
https://maps.googleapis.com/maps/api/geocode/xml?address=123%2C%20Harbor%2C%20Woods%20Circle%2C%20Safety%2C%20Harbor%2C%20FLCA%2C%2034695&key=12345
I have tried Disabling the Google Maps API, and then Enabling it again, but I still get the same error message.
I am thinking that maybe I don't have the right API enabled on this, as it should be working.
To use the Geocoding Web Service you need to enable it in the Google API Console
I just found it, I needed to enable the Geocoding API.
I saw that one has not to obtain a Google Maps API key if you want to use their maps api in general, only if you want to use their web services and statistics etc.
Now I have two questions regarding this:
If I have a public website which uses the Google Maps API to display a map with default options. How does Google count the API calls if I don't use an API key? (Maybe with the help of the domain which requests the map?)
If they do so and my site exceeds the 25k calls/day, is there a possiblity that my users can login with their Google account on my site and some backend logic will get them an API key from Google that I store e.g. in a database. So I could use the API keys of my users to bypass the API usage limits only for my site.
Assuming you are using the Javascript API v3:
This SO question partially answers your queries.
Have a look at the usage limits, it looks like that you cannot use more than one API key:
Can I use more than one API key to increase my available usage over
the documented limits?
Google reserves the right to withhold access to the Maps API from any site that attempts to use more than the permitted number of map
loads of the Maps API without permission, and fails to respond when
contacted by Google.
Though this may be debatable, to me it seems a bad idea using your user's API key. For sure you need to ask the permission, then you have to monitor their quotas and so on, a minefield...
TL;DR if you exceed constantly the daily quota you should purchase a larger quota.
I'm using Google Maps web services to perform server-side (reverse) geocoding.
I've got a browser-side and server-side Google API key from the Google APIs Console, which permits the Google Maps JS API to use higher request quotas, and enables pay-per-use for overages (successfully tested in-browser via JS). But the server-side key doesn't seem to work on web services requests.
For example, this URL works fine:
http://maps.googleapis.com/maps/api/geocode/json?sensor=true&latlng=43.477329,-80.548601
But if you add a "key=..." parameter, as in the other APIs, I get a REQUEST_DENIED status.
Am I doing something wrong, or is this just not supported on the web services APIs (yet)? Will it be supported in the future?
See also
request_denied when i include key=my_api_key
Nope, you're not doing anything wrong.
Unfortunately, enforcing tight limits on the Google Geocoding API, also called "Server-Side Geocoding", is Google's design. If your app needs more than 2,500 Server-Side Geocodes per day, then you'll need to upgrade to their Google Maps API for Business product.
Hold on, it gets worse.
If your app's server IP address is shared with other apps, that 2,500 request daily limit applies to ALL of them. This includes apps that share the same server IP address as you, but don't belong to you! This can be a common situation with any PaaS, like Google App Engine or Heroku. So, even if your app works flawlessly today, there is no guarantee that it's still going to work tomorrow.
In the article, "Geocoding Strategies", Google indicates the solution is to "almost always" use "Client-Side Geocoding" via the Geocoding Service, part of the Google Maps JavaScript API V3. The primary reason is that limits are enforced per user, per session. Requests like this shouldn't run up against quota limits unless you're executing geocode batches on the client (not a typical use case).
One golden nugget from the "Geocoding Strategies" article: Design a page that takes user input, calls the client-side Geocode service method, then passes that information to your server app where it can be processed, and hopefully cached. This is FAR from ideal, but if upgrading to Google Maps API for Business isn't an option, it might be the only way to go.
Good luck!
According to this post, your API key should work as one of the three option for requests over 25,000 loads per day.
https://developers.google.com/maps/faq#usagelimits
I am attempting to add a Google maps to a website and allow users to insert their postcode to get directions to my client.
Currently I can't manage to make the map visible, the website although under development IS hosted and I have my own unique api key.
Is there more verification necessary? I read something about meta tags but was unsure how to get a code.
Unless your expecting or are getting more than 25000 hits a day, you don't need an API key for the current version of google maps, so requesting it with http://maps.google.com/maps/api/js?sensor=true should work then use a library like this should get it to work http://code.google.com/p/jquery-ui-map/wiki/jquery_ui_map_v_3_tutorial
Follow that tutorial and you'll have it running in no time.