I've looked up the general error message, but it always seems to come immediately after an attempt to clone the repository. I'm using hg serve if that helps shed any light on this.
C:\workspace\Project>hg clone --pull http://host:8001 client
requesting all changes
adding changesets
adding manifests
adding file changes
added 1556 changesets with 6734 changes to 2367 files (+1 heads)
updating to branch trunk
abort: error: getaddrinfo failed
As the comments you've received allude to, I think the repository you're cloning contain sub-repositories.
The error message is saying that Mercurial can't find the IP address for something (i.e. a DNS lookup has failed), but you've obviously managed to connect to the server with the initial repository on it. Sub-repositories are cloned during the update process of the parent. The fact that you're getting the error just after the updating to branch trunk message leads to the conclusion that this is your problem.
Look at the contents of .hgsub in the original repository. If it has anything in it, it will have the URLs of any sub-repositories. I suspect these URLs have been written in a way that means they aren't accessible from the machine you're trying to clone to. If possible, fix these to make them general enough to work anywhere.
That error message should really say what it was looking up and why.
Related
I'm trying to commit with tortoiseHq, but I'm getting the error
Abort: precommit.whitelist hook failed, and the file is right since I diff'd with the file from another repo which is working fine and they have equal binary.
What should I do to fix this problem?
The precommit hook is set only on your repo, and may not be on every repository just yet. That may explain why you have the same identical file elsewhere. Or maybe it existed before the hook was added.
Nonetheless, for the problem at hand, you have few options. Either contact your admin to see why the file is not on the whitelist, and add it to the list, or disable the hook on your repo. If you do the latter, you may still get rejected at the push, if the same hook is present there, too.
I have a problem. Actually I want to push, but gives some error.
error: unable to push: Push will not be performed as it would create
remote branches. You must first resync by doing a pull from the target
repository and merge.
Then, I want to pull and I get this error2.
error2:
Output: [comparing with
http://mercurial.intuxication.org/hg/itucs-blg361-2011-g03, searching
for changes, abort: Permission denied: /home/burak_bundle0]
Do you have permission on /home/burak_bundle0?
I just did hg pull on a repository and brought in some changesets. It said to run hg update, so I did. Unfortunately, when I did that, it failed with the following error message:
abort: integrity check failed on 00manifest.i:173!
When I run hg verify, it tells me there are a number of issues with things not in the manifest (with some slight path obscuring):
>hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
somewhere1/file1.aspx#172: in changeset but not in manifest
somewhere2/file1.pdf#170: in changeset but not in manifest checking files
file3.csproj#172: ee005cae8058 not in manifests
somewhere2/file1.pdf#171: 00371c8b9d95 not in manifests
somewhere3/file1.ascx#170: 5c921d9bf620 not in manifests
somewhere4/file1.ascx#172: 23acbd0efd3a not in manifests
somewhere5/file1.aspx#170: ce48ed795067 not in manifests
somewhere5/file2.aspx#171: 15d13df4206f not in manifests
1328 files, 174 changesets, 3182 total revisions
8 integrity errors encountered!
(first damaged changeset appears to be 170)
The source repository passes hg verify just fine.
Is there any way to recover from an integrity check failure or do I need to re-clone the repository completely from the source (not a huge issue in this case)? What could I have done to cause this, so I don't do it again?
Well, since the first damaged changeset is 170, you could clone your local repository to 169 and then pull from the source. That means only pulling 5 changesets.
hg clone -r 169 damagedrepo fixedrepo
cd fixedreop
hg verify
And then:
hg pull originalsource
As for manual recovery of repository corruption, this page expounds on that better than I can. See section 4:
I have found corruption once in a while before, and although the above
documentation says it is usually from user error, my instances were on
removable USB drives with empty working directories. Sometimes things
just don't get written correctly or are interfered with somehow: it's
not always user error. But I always have multiple copies I can reclone
from so I've been able to get away with basic fixing.
If the simple fix of a partial local clone and pulling from the server doesn't fix it, you're down to 2 options after backing up your changes (if any) to a bundle or patches:
Manually hacking at Mercurial's files.
Doing a new full clone from the server. Usually the easier and faster of the two.
Beware: This method will change all hashes.
Actually there is another way to recover the repository when it is corrupted like this -
You can do a complete rebuild of the repository by using the convert extension. See Section 4.5 on https://www.mercurial-scm.org/wiki/RepositoryCorruption#Recovery_using_convert_extension
First enable the convert extension by adding the following to your ~/.hgrc file
[extensions]
convert=
Then convert the bad repo to create a fixed repo:
$ hg convert --config convert.hg.ignoreerrors=True REPO REPOFIX
This worked for me when I had the experience of suddenly finding that there were missing files in the manifests - "error 255".
Try remove your file 00manifest.i from repo and next use hg remove 00manifest.i and hg commit commands. Worked for me.
What we ended up doing was making a new copy of our 'central' repository, deleting the .hg folder in this copy, creating a new repository there (hg init), and then working with this as the central repository.
Be aware however this is only an appropriate solution if you don't need your changeset history other than as a reference (which we don't). You can still use your old central repository for this purpose.
When remotely updating a Mercurial Repository, I am getting the following error from the hg update command that is being run on the remote server after the push. I looked around online for some help for this however was unsuccessful in finding anything useful. At this point, I am hoping for some ideas and / or insight as to what would be causing this problem.
The error is just below. It occurred when pushing two changesets. One changeset included an unrelated index.html file change. The other changeset was a merge, which included the index.html change as well as the renaming of the two image files.
levinaris#server01:/home/web/repository$ hg push
pushing to ssh://10.10.1.12//home/web/repository
searching for changes`remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 1 changes to 1 files
remote: abort: Operation not permitted: /home/web/repository/html/images/image.gif
remote: warning: changegroup hook exited with status 255
Additional details:
Both images are 10385 bytes in size. (yes, this error occurs on two images I have)
The two images had their names changed in changesets that were already pushed and hg updated due to case-folding collisions when attempting to pull the repositories down to Windows PCs.
The target server has the following hook in /etc/mercurial/hgrc:
[hooks]
changegroup = hg update
As a work-around, I did the following:
Deleted image.gif.
Deleted another image file that produced the error.
Ran hg update - success!
Ran hg revert html/image/image.gif
Ran hg revert html/image/otherimage.gif
At this point, I am trying to better understand the cause of this problem, so that I can ensure a solid, easy-to-use implementation in my environment. I really appreciate your help!!
After using hg --debug update in the hook, I received this output:
levinaris#server01:/home/web/repository$ hg push
pushing to /home/web/staging/repository
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 1 changes to 1 files
resolving manifests
overwrite False partial False
ancestor 58a5edb95c9a local 58a5edb95c9a+ remote 3aafb97b148c
searching for copies back to rev 6
html/index.php: remote is newer -> g
html/images/otherimage.gif.casefolding: update permissions -> e
html/images/image.gif: update permissions -> e
abort: Operation not permitted: /home/web/staging/repository/html/images/image.gif
warning: changegroup hook exited with status 255
Additional Permission Information:
All 3 files in the 2 changesets have 775 permission with the webuser:dev user:group.
My Global hgrc file has the webuser trusted
[trusted]
users = webuser
Is it possible that the permissions that file on the server were such that it couldn't be overwitten by the person doing the push?
If, for example, two different people have done that push (and thus update) the second person isn't going to be able to overwrite the files created by the first person's push triggered update.
Maybe try changing the hook to this for a test (you don't actually have those single quotes on your hook, right?):
[hooks]
changegroup = hg --debug update
If it is a permissions issue the usual fix is to put everyone who will be pushing and updating into the same group (I call mine 'hg') and then using the sticky group bit on all the directories in the repo to make sure new files have that group.
Before explaining my problem let me tell you the Mercurial setup,
We have the following repos,
RELEASE
DEVELOPMENT
BUGFIX
All the above repo are running on a central server using IIS and hgwebdir.cgi
Now coming to the problem,
I clone a local repo from DEVELOPMENT repo.
I make changes to the clone and commit (Not push).
I make a bundle from the clone and pass the bundle to QA who has cloned the RELEASE repo.
Now I try to apply the bundle to the RELEASE repo clone using hg unbundle
I get an error, abort: error: ftp error: no host given
What am I doing wrong? Can you give solution to the above problem keeping a Windows setup in mind?
It really sounds like you have a syntax error in your unbundle command. The normal usage is just:
hg unbundle c:\path\to\the.bundle
there's no ftp involved unless you're trying to use a ftp:// URL which isn't supported. Is it possible you have a directory named ftp and the parser is mistakign it for a component in a ftp URL?
Also, most folks wouldn't use bundles in the scenario you're describing. They'd just do:
hg push URL-or-file-path-to-QA
and push direct to QA's own repo (not to RELEASE)
People generally use bundles only when a network connection isn't possible or practical.
I experienced the same problem, I don't think hg likes uncs.
I mapped \server\DevSourceCode\Mercurial to R: and it worked fine, see below:
R:\Repositories\myproj>hg unbundle \\server\DevSourceCode\Mercurial\ChangeBundles\myproj_changes.hg
abort: error: ftp error: no host given
R:\Repositories\myproj>hg unbundle R:\ChangeBundles\myproj_changes.hg
adding changesets
adding manifests
adding file changes
added 0 changesets with 0 changes to 139 files
(run 'hg update' to get a working copy)