I have a problem. Actually I want to push, but gives some error.
error: unable to push: Push will not be performed as it would create
remote branches. You must first resync by doing a pull from the target
repository and merge.
Then, I want to pull and I get this error2.
error2:
Output: [comparing with
http://mercurial.intuxication.org/hg/itucs-blg361-2011-g03, searching
for changes, abort: Permission denied: /home/burak_bundle0]
Do you have permission on /home/burak_bundle0?
Related
# hg push
returns this following error shown in the below image:
I have pull the VexsysMindsCSCKrishna branch by following command:
#hg pull -b VexsysMindsCSCKrishna <https://bitbucket.org>
#hg update VexsysMindsCSCKrishna
My working branch is VexsysMindsCSCKrishna so I add,commit but when I try to push gives me error shown in the above figure . Is this the right step to checkout remote branch locally ? I don't know where the problem is and #hg push --force is also not helpful.
You do not have permission to push to that branch on the server you are pushing to. Fixing this will require changing the settings on the server.
I've looked up the general error message, but it always seems to come immediately after an attempt to clone the repository. I'm using hg serve if that helps shed any light on this.
C:\workspace\Project>hg clone --pull http://host:8001 client
requesting all changes
adding changesets
adding manifests
adding file changes
added 1556 changesets with 6734 changes to 2367 files (+1 heads)
updating to branch trunk
abort: error: getaddrinfo failed
As the comments you've received allude to, I think the repository you're cloning contain sub-repositories.
The error message is saying that Mercurial can't find the IP address for something (i.e. a DNS lookup has failed), but you've obviously managed to connect to the server with the initial repository on it. Sub-repositories are cloned during the update process of the parent. The fact that you're getting the error just after the updating to branch trunk message leads to the conclusion that this is your problem.
Look at the contents of .hgsub in the original repository. If it has anything in it, it will have the URLs of any sub-repositories. I suspect these URLs have been written in a way that means they aren't accessible from the machine you're trying to clone to. If possible, fix these to make them general enough to work anywhere.
That error message should really say what it was looking up and why.
When remotely updating a Mercurial Repository, I am getting the following error from the hg update command that is being run on the remote server after the push. I looked around online for some help for this however was unsuccessful in finding anything useful. At this point, I am hoping for some ideas and / or insight as to what would be causing this problem.
The error is just below. It occurred when pushing two changesets. One changeset included an unrelated index.html file change. The other changeset was a merge, which included the index.html change as well as the renaming of the two image files.
levinaris#server01:/home/web/repository$ hg push
pushing to ssh://10.10.1.12//home/web/repository
searching for changes`remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 1 changes to 1 files
remote: abort: Operation not permitted: /home/web/repository/html/images/image.gif
remote: warning: changegroup hook exited with status 255
Additional details:
Both images are 10385 bytes in size. (yes, this error occurs on two images I have)
The two images had their names changed in changesets that were already pushed and hg updated due to case-folding collisions when attempting to pull the repositories down to Windows PCs.
The target server has the following hook in /etc/mercurial/hgrc:
[hooks]
changegroup = hg update
As a work-around, I did the following:
Deleted image.gif.
Deleted another image file that produced the error.
Ran hg update - success!
Ran hg revert html/image/image.gif
Ran hg revert html/image/otherimage.gif
At this point, I am trying to better understand the cause of this problem, so that I can ensure a solid, easy-to-use implementation in my environment. I really appreciate your help!!
After using hg --debug update in the hook, I received this output:
levinaris#server01:/home/web/repository$ hg push
pushing to /home/web/staging/repository
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 1 changes to 1 files
resolving manifests
overwrite False partial False
ancestor 58a5edb95c9a local 58a5edb95c9a+ remote 3aafb97b148c
searching for copies back to rev 6
html/index.php: remote is newer -> g
html/images/otherimage.gif.casefolding: update permissions -> e
html/images/image.gif: update permissions -> e
abort: Operation not permitted: /home/web/staging/repository/html/images/image.gif
warning: changegroup hook exited with status 255
Additional Permission Information:
All 3 files in the 2 changesets have 775 permission with the webuser:dev user:group.
My Global hgrc file has the webuser trusted
[trusted]
users = webuser
Is it possible that the permissions that file on the server were such that it couldn't be overwitten by the person doing the push?
If, for example, two different people have done that push (and thus update) the second person isn't going to be able to overwrite the files created by the first person's push triggered update.
Maybe try changing the hook to this for a test (you don't actually have those single quotes on your hook, right?):
[hooks]
changegroup = hg --debug update
If it is a permissions issue the usual fix is to put everyone who will be pushing and updating into the same group (I call mine 'hg') and then using the sticky group bit on all the directories in the repo to make sure new files have that group.
I have a strange problem with updating Mercurial. Everytime when I add a file to my repository and then update another location of the repository (for example with in CI process), the error "no match found" occures. Then when I remove to whole folder and clone it again there are no problems and the new added file(s) are there. Updating and removing doesnt give problems
When I do "a" Verify the following is shown:
data/test.txt.i#54: missing revlog!
54: empty or missing test.txt
test.txt#54: b80de5d13875 in manifests
not found 3 integrity errors
encountered! (first damaged changeset
appears to be 54)
Any idea what could be causing this?
EDIT
The complete trace:
ThoughtWorks.CruiseControl.Core.CruiseControlException:
Source control operation failed:
abort: data/test.txt.i#b80de5d13875:
no match found! . Process command: hg
update --noninteractive at
ThoughtWorks.CruiseControl.Core.Sourcecontrol.ProcessSourceControl.Execute(ProcessInfo
processInfo) at
ThoughtWorks.CruiseControl.Core.Sourcecontrol.Mercurial.Mercurial.GetSource(IIntegrationResult
result) at
ThoughtWorks.CruiseControl.Core.IntegrationRunner.Build(IIntegrationResult
result) at
ThoughtWorks.CruiseControl.Core.IntegrationRunner.Integrate(IntegrationRequest
request)
The "repository corruption" is not patent here, since you can clone again, and retrieve the all content (old and newly added).
So the different points to check are:
1/ process conflict of some kind (something preventing data/test.txt.i#b80de5d13875 to be written, even so the file content is recorded)
2/ hg revlog and hg debugindex, to check out the versions actually recorded in your repo.
3/ hg verify to rule out any repo corruption.
4/ check the integrity of your repo
Before explaining my problem let me tell you the Mercurial setup,
We have the following repos,
RELEASE
DEVELOPMENT
BUGFIX
All the above repo are running on a central server using IIS and hgwebdir.cgi
Now coming to the problem,
I clone a local repo from DEVELOPMENT repo.
I make changes to the clone and commit (Not push).
I make a bundle from the clone and pass the bundle to QA who has cloned the RELEASE repo.
Now I try to apply the bundle to the RELEASE repo clone using hg unbundle
I get an error, abort: error: ftp error: no host given
What am I doing wrong? Can you give solution to the above problem keeping a Windows setup in mind?
It really sounds like you have a syntax error in your unbundle command. The normal usage is just:
hg unbundle c:\path\to\the.bundle
there's no ftp involved unless you're trying to use a ftp:// URL which isn't supported. Is it possible you have a directory named ftp and the parser is mistakign it for a component in a ftp URL?
Also, most folks wouldn't use bundles in the scenario you're describing. They'd just do:
hg push URL-or-file-path-to-QA
and push direct to QA's own repo (not to RELEASE)
People generally use bundles only when a network connection isn't possible or practical.
I experienced the same problem, I don't think hg likes uncs.
I mapped \server\DevSourceCode\Mercurial to R: and it worked fine, see below:
R:\Repositories\myproj>hg unbundle \\server\DevSourceCode\Mercurial\ChangeBundles\myproj_changes.hg
abort: error: ftp error: no host given
R:\Repositories\myproj>hg unbundle R:\ChangeBundles\myproj_changes.hg
adding changesets
adding manifests
adding file changes
added 0 changesets with 0 changes to 139 files
(run 'hg update' to get a working copy)