I am new with using the Google maps geocoding API. I gave it an address and have a few different coordinates in the response. Why are there different coordinates?
More on Viewports: https://developers.google.com/maps/documentation/geocoding/intro#Viewports
"In a geocoding request, you can instruct the Geocoding service to prefer results within a given viewport (expressed as a bounding box). You do so within the request URL by setting the bounds parameter. Note that biasing only prefers results within the bounds; if more relevant results exist outside of these bounds, they may be included.
The bounds parameter defines the latitude/longitude coordinates of the southwest and northeast corners of this bounding box using a pipe (|) character to separate the coordinates."
Viewport allows you to create a boundary within a specific region, sort of like looking at a larger section of the map within a set of coordinates. Locations coordinates are giving you the exact spot of a location.
How can I see the nearby places between two location.
For example:
From:İstanbul
To:Ankara
I want to see cafes on this route.
Cafes along route image
I can suggest having a look at RouteBoxer library. This library allows to generate a set of LatLngBounds objects that are guaranteed to contain every point within a given route. After that you can use places search with a set of LatLngBounds to find cafes within given bounds.
https://developers.google.com/maps/documentation/javascript/places#place_search_requests
For android after select for example driving, at top you can change "Your Location" to anywhere else.
or you can use "Measure distance" to calculate direct distance between places.
Is there a way to adjust the zoom Depending on the item searched, say if somebody searched on my application for a city/country/location, the viewport returned will be a bit higher than the city, So all of the city will be Included.
I know if you have several places you can do fitBounds(); but what if it's only one place like a location/country/city
Is there a way of setting the zoom a bit higher than that location?
Google's geocoder API returns the viewport coordinates of the searched object - see the documentation for an example. You can feed the viewport coordinates to the fitBounds method.
I need to get the specific address (or lat/long coordinates) of a place based on that place's name.
Specifically, I need to determine the location of supermarkets in a given area so that I can use those locations as 'markers' in my implementation of google maps static maps api.
Using the following, I can if you input a specific location in the area that currently says "INSERT_LOCATION_HERE", then you will get a google map of the specified area with markers at the locations.:
http://maps.google.com/maps/api/staticmap?center=Ithaca,%20NY&size=512x512&maptype=roadmap&markers=color:blue|label:S|INSERT_LOCATION_HERE&sensor=false
For example (the marker indicates the local Wegmans store based on its address:
http://maps.google.com/maps/api/staticmap?center=Ithaca,%20NY&size=512x512&maptype=roadmap&markers=color:blue|label:S|500%20So.%20Meadow%20Street&sensor=false
If anyone knows how to do this without using google maps places api, that would be extremely helpful!
If you want to get the name as a string intead of an image, you can do it with a little help for Google. That'll match nicely with the static map that you're using.
Let's say you want to search for "Den Haag"...
Construct a URL like this, and parse the result:
http://maps.google.com/maps/geo?q=den%20haag
You can also specify the output format:
http://maps.google.com/maps/geo?q=den%20haag&output=xml
http://maps.google.com/maps/geo?q=den%20haag&output=csv
http://maps.google.com/maps/geo?q=den%20haag&output=json
You can also provide coordinates instead of a name, and get a full name+coordinates in return:
http://maps.google.com/maps/geo?q=52.0467315,4.3796239&output=json
For some reason the links don't work when you click them from this page. I guess google doesn't accept a referrer in the request, so just copy and paste the links... That works.
I would like to produce a url for Google Maps that goes to a specific latitude and longitude. Now, I generate a url such as this:
http://maps.google.com/maps?z=11&t=k&q=58 41.881N 152 31.324W
The resulting map comes up with a round "A" balloon pointer, which seems to point to the nearest named object, and a green arrow, which points to the lat-lon. Sometimes, as in this example, the "A" pointer is centered and is far enough away that you cannot see the pointer to the lat-lon. (Zoom out to see both pointers in this example. The "A" pointer is in the center of Alaska, while the lat-long pointer is on Kodiak Island.)
Are there some parameters I can use in the Google Maps URL that will produce a single pointer to a designated lat-lon? (This loads in a separate window. It is not embedded.)
This is current accepted way to link to a specific lat lon (rather than search for the nearest object).
http://maps.google.com/maps?z=12&t=m&q=loc:38.9419+-78.3020
z is the zoom level (1-20)
t is the map type ("m" map, "k" satellite, "h" hybrid, "p" terrain, "e" GoogleEarth)
q is the search query, if it is prefixed by loc: then google assumes it is a lat lon separated by a +
yeah I had the same question for a long time and I found the perfect one. here are some parameters from it.
https://maps.google.com?parameter = value
q=
is used to specify the search query in Google maps search.
eg :
https://maps.google.com?q=newyork or
https://maps.google.com?q=51.03841,-114.01679
near=
is used to specify the location alternative to q=. Also has the added effect of allowing you to increase the AddressDetails Accuracy value by being more precise. Mostly only useful if query is a business or suchlike.
z=
Zoom level. Can be set 19 normally, but in certain cases can go up to 23.
ll=
Latitude and longitude of the map centre point. Must be in that order.
Requires decimal format. Interestingly, you can use this without q, in
which case it doesn’t show a marker.
sll=
Similar to ll, only this sets the lat/long of the centre point for a business search. Requires the same input criteria as ll.
t=
Sets the kind of map shown. Can be set to:
m – normal map,
k – satellite,
h – hybrid,
p – terrain
saddr=
Sets the starting point for directions searches. You can also add text into this in brackets to bold it in the directions sidebar.
daddr=
Sets the end point for directions searches, and again will bold any text added in brackets.You can also add "+to:" which will set via points. These can be added multiple times.
via=
Allows you to insert via points in directions. Must be in CSV format. For example, via=1,5 addresses 1 and 5 will be via points without entries in the sidebar. The start point (which is set as 0), and 2, 3 and 4 will all show full addresses.
doflg=
Changes the units used to measure distance (will default to the standard unit in country of origin). Change to ptk for metric or ptm for imperial.
msa=
Does stuff with My Maps. Set to 0 show defined My Maps, b to turn the My Maps sidebar on, 1 to show the My Maps tab on its own, or 2 to go to the new My Map creator form.
dirflg=
can set miscellaneous values below:
h - Avoid highway
t - Avoid tolls
reference
http://moz.com/ugc/everything-you-never-wanted-to-know-about-google-maps-parameters
In May 2017 Google announced the Google Maps URLs API that allows to construct universal cross-platform links. Now you can open Google maps on web, Android or iOS using the same URL string in form:
https://www.google.com/maps/search/?api=1¶meters
There are several modes that you can use: search, directions, show map and show street view.
So you can use something like
https://www.google.com/maps/search/?api=1&query=58.698017,-152.522067
to open map and place marker on some lat and lng.
For further details please refer to:
https://developers.google.com/maps/documentation/urls/guide
This should help with the new Google Maps:
https://maps.google.com/maps/place/<name>/#<lat>,<long>,15z/data=<mode-value>
The place adds a marker.
name could be a search term like "realtors"/"lawyers".
lat and long are the coordinates in decimal format and in that order.
15z sets zoom level to 15 (must be between 1 ~ 20).
You can enforce a particular view mode (map is default) - earth or terrain by adding these:
Terrain: /data=!5m1!1e4
Earth: /data=!3m1!1e3
E.g.: https://www.google.com/maps/place/Lawyer/#48.8187768,2.3792362,15z/data=!3m1!1e3
References:
https://moz.com/blog/new-google-maps-url-parameters
http://dddavemaps.blogspot.in/2015/07/google-maps-url-tricks.html
The following works as of April 2014. Delimiting each component of the URL with + and & for spaces and addition statements, respectively.
Full HTML:
<iframe src="http://maps.google.com/maps?q=Scottish+Rite+Hamilton+ON&loc:43.25911+-79.879494&z=15&output=embed"></iframe>
Broken down:
http://maps.google.com/maps?q=
where ?q= starts the general search, which I provide a venue, city, province info using + for spaces.
Scottish+Rite+Hamilton+ON
Next the geo-data. Lat and lng.
&loc:43.25911+-79.879494
Zoom level
&z=15
Required for iframes:
&output=embed
http://maps.google.com/maps?q=58%2041.881N%20152%2031.324W
Just use the coordinates as q-parameter. Strip the z and t prameters. While z should actually just be the zoom level, it seems that it won't work if you set any.
t is the map type. Having that said, it's not obvious how those parameters would affect the result in the shown way. But they do.
Maybe you should try the ll-parameter, but only decimal format will be accepted.
You can find a quick overview of all the parameters here.
If you need a name on your pin, you can also use:
http://maps.google.com/?q=MY%20LOCATION#lat,long
All the answers didn't work for me (the loc: and # options). So here is my solution for the new Google maps (April 2014)
Use the q= for query description, for example the street or the name of the place.
Use ll= for the lat, long coordinates.
You can add extra parameters like t=h (hybrid) and z=19 (zoom)
https://maps.google.com/?q=11+wall+street+new+york&ll=40.7060471,-74.0088901
https://maps.google.com/?q=new+york+stock+exchange&ll=40.7060471,-74.0088901
https://maps.google.com/?q=new+york+stock+exchange&ll=40.7060471,-74.0088901&t=h&z=19
There have been a number of changes, some incompatible, since I asked this question 5 years ago. Currently, the following works properly:
https://www.google.com/maps/place/58°41.881N 152°31.324W/#58.698017,-152.522067,12z/
The first latitude/longitude will be used for the pin location and label. It can be in degrees-minutes-seconds, degrees-minutes, or degrees. The second latitude/longitude (following the "#") is the map center. It must be in degrees only in order for the zoom (12z) to be recognized.
For terrain view, you can append "data=!4m2!3m1!1s0x0:0x0!5m1!1e4". I can find no documentation on this, though, so the spec could change.
New Version queries have a different format
To reach a lat long by url use (e.g.)
https://www.google.com/maps/search/-15.924,-5.719
works fine
https://maps.google.de/maps?q=51.404989,13.091751&z=17&t=k
This doesn't have to be much more complicated than passing in a value for the 'q' parameter. Google is a search engine after all and can handle the same stuff it handles when users type queries into its text boxes
"maps.google.com?/q=32.5234,-78.23432"
This works to zoom into an area more then drop a pin:
https://www.google.com/maps/#30.2,17.9820525,9z
And the params are:
#lat,lng,zoom
If you only have degrees minutes seconds you can pass them on the url :
https://maps.google.com/maps?q=latDegrees latMinutes latSeconds longDegrees longMinutes longSeconds
substitute in %20 for the spaces
"ll" worked best for me, see:
http://mapki.com/wiki/Google_Map_Parameters (query reference)
it shall not be too hard to convert minutes, seconds to decimal
http://en.wikipedia.org/wiki/Decimal_degrees
for a marker, possibly the best would be ?q=Description#lat,long