I'm making a game similar to 'Run' (http://www.albinoblacksheep.com/games/run) but I can't quite figure out the floor part. I'm not wanting the sides and a ceiling like in 'Run', just the main floor.
I'm new to Flash game development (AS3) but I know the basics. I realise the character isn't moving and is just turning (the level itself moves). How do a make a continuous floor, do I have to make a very long .fla file, or do I have to do this with code?
All ideas and help appreciated, Thanks. =)
You should use Tiles. Basically, a tile game consists of a lot of squared tiles, which are inserted when appear in screen and removed when goes out.
In your case, maybe you could use a big tile, with screen's size.
You can visualize a good example here, also a very good resource for gamedev on Flash.
You need to generate sprites of the edge of the screen and either recycle them when their x < some value or dispose and create new ones.
I think you can just use Bitmap.draw() to draw different pixels on a Bitmap that you've applied a 3D transformation to. You can see the basic concept illustrated here.
Related
I'm having a terrible time trying to code in Flash for a small game level.
I'm trying to drag an object within a path using a mouse pointer. And whenever the object hits the path boundary it shouldn't go beyond. Can anyone help me. I'm a noob in flash actionscript 3.
Any help would be much much appreciated !Thanks in advance.
I think what you're looking for is termed "Bitmap Hit Testing." It goes beyond the level of the regular hit test checking.
In regular hit testing (like obj.hitTestObject(otherobj)), Flash is checking the "boundary boxes" against each other. For instance, if you have two green circles you're trying to hit test against each other, they will register as colliding even if the corners which appear white are touching. There's an invisible bound box surrounding the circle that's colliding with the other invisible bound box surrounding the other circle.
Bitmap hit testing, on the other hand, is significantly slower and complex, but much more accurate. It is actually checking pixel per pixel whether the two images are colliding. In this case then, bitmaps can be irregular shapes with say, a path within, like this:
I would recommend looking at http://www.freeactionscript.com/tag/using-bitmapdata-hittest/ for a demo to make sure that this is what you're looking for, and then http://www.mikechambers.com/blog/2009/06/24/using-bitmapdata-hittest-for-collision-detection/ for an explanation, both by Mike Chambers.
I surmise that your process would be a conversion of both of your clips (the dragged object and the "walls" of the path) into BitmapData (do some quick research), and then a simple method call of the BitmapData.hitTest for your checking. Let me know if you have any questions or need any additional clarification :-)
I've got a problem in actionscript3 with moving large DisplayObject-s. When the size of the DisplayObject is quite large (more than screen size) the movement loses smoothness and it looks like the object starts jumping forward and backward, which overall looks very unpleasant.
Does anybody know the way to fix that? I am trying to make a sort of a race game, where I need to move the background sprite to make the illusion of movement.
Try turning on cacheAsBitmap. That may give you some performance improvements, especially if the object is static (doesn't have any animated bits in it). With AS3 and Flash Player 10 or newer you should be able to get smooth movement even with a large sprite. I've got several games that do it.
Have to agree with Laurent - it is probably better to split the background into small pieces and move them
I'm working with a few programming buddies to create an AS interface to the kinect and one problem we're running into is image differencing. We need to be able to throw out image data that doesn't change from image to image so we can pin-point only things that are moving(i.e. people).
Anyone have any experience with this or a direction we can go?
I would consider creating a pixel bender shader to find the difference and also do any other math or tracking. Pixel bender gets its own thread outside of the normal flash player so you can get some more horse power for your setup. Pixel Bender shaders can be applied to bitmaps, vectors, or video so I think it is perfect for this project. Good Luck!
http://www.adobe.com/devnet/flash/articles/pixel_bender_basics.html
And is is a full collection of shaders including difference
Take a look at the threshold method on BitmapData.
It'll allow you to do this stuff. Their docs have a simple example so check that out.
It might be a long shot, and this is just me rambling, but in sound theory (strange how I'm relating it to image cancellation, but here goes...) the concept of cancellation is when you take a wave sample and add its inverse. It's how you make acapellas from instrumentals + originals or instrumentals from acapellas + originals.
Perhaps you can invert the new image and "normalize" the two to get your offsets? I.e. the first image is 'black on white' and the second image is 'white on black', and then detect the differences for the bitmap data. I know I did a similar method of finding collisions with AS3 a few years back. This would, in theory, cancel out any 'repeating' pixels and leave you with just the changes from the last frame.
With BitmapData your values are going to be from 0 to 255, so if you can implement a cancellation (because a lot of parts of the image are going to stay the same from frame t frame) then you can easily find the changes from the previous frame.
Just a thought! Whatever your solution is it's going to have to be quick in order to beat the flash runtimes' slow speeds. Your Kinect read FPS rate will be greatly hindered with bad code.
Here is some frame differencing code I wrote awhile back. It uses bitmapData: http://actionsnippet.com/?p=2820
I also used this to capture moving colors in a video feed: http://actionsnippet.com/?p=2736
I'm brand new to Flash (and game programming, really), but want to learn a bit of it. My overall learning project is to create a Monopoly clone in Flash. Unfortunately, I'm struggling to get over even my first hurdle - how to create the board graphically, and how then to deal with it in the code. So far, my thoughts are to break the board down into the different sizes of tiles (the normal property ones, the corner 4 and a large one for the middle section), then somehow place these all in the correct position relative to each other and keep that positioning correct as the pieces (and thus the camera view) move about the board. (And, hopefully some day have a zooming ability too...)
Is this a good approach, or is there a better one? Does anyone know where I can find a tutorial specifically on creating board games in Flash (any sort really, wouldn't have to be Monopoly but just a game that has a board which tokens move across - and preferably which has to pan as well).
Also, as an aside, is there any way to have a dynamically coloured rectangle in a flash MovieClip (like you can have dynamic textboxs)? I ask because it would be useful if there was, as I could generate every property tile with just one MovieClip which took a name, a value and a colour...
everything you describe here you can do pretty easily once you get the hang of component sprites. personally i would make a single sprite that will then hold all of the "tiles" in the game, this would allow you to "zoom" the board while keeping all the pieces relative:
if you create this parent to have an addTile() and getTile(index:int):Sprite method then you can easily push the tiles and retrieve them from an array, so that Go is at index 0, old kent road is at 1 etc. that way you can use a single integer value to determine the position of the player piece as you can then use getTile(int).x etc.
the position of the tiles themselves can be worked out relative to the others. if you have a tile that is 20px wide and 40px high then you can position the tile as x = index * 20 for the first row, after the initial 11, you need to rotate them all and then use the y index instead (rotation = 90; x = 11*20; y = (index-11)*20) this will depend exactly on your origin point of your Sprite.
to draw coloured boxes you use the graphics of the Sprite, there are plenty of tuts on API drawing out there, but here is a basic box of 10x10px:
var drawing:Sprite = new Sprite();
drawing.graphics.beginFill(0x0000FF);
drawing.graphics.drawRect(0, 0, 10, 10);
drawing.graphics.endFill();
Another approach to your question could be to learn about Object Oriented Programming. That may not solve your representing the board graphically straight away, but it would definitely help you structure your game.
With OOP, you could define a "Property" Class with a set of properties such as streetName , color , price etc... I haven't played Monopoly in a while but you can get the general idea, i.e. to create a base object and make it specific by setting the object's properties. Your question about the colored rectangle can actually apply to other properties, a great way to avoid unnecessary repetition.
Broadly speaking OOP tends to emulate real life situations, so you could actually look at your Monopoly game, break it into its various parts, find common properties etc... I won't start a lesson here :) I'd be pretty bad at it, but there's plenty of resources out there . Look for OOP, Design Patterns & Actionscript3.
After a little research, you may find that your question about how to handle graphics may not be such a problem after all.
Your questions are way too general. I'm sure you don't want us to walk you through your whole project right?
Now to gain some experience, I suggest to you simply work through a few flash gaming tutorials. There are a LOT of those, I googled for 2-3 seconds and found this:
http://pelfusion.com/tutorials/35-flash-game-development-tutorials-fla-files/
I'm sure you feel disappointed by this answer, but this is the first step in solving your own problems. The internet has more than enough general game tutorials already. If you have specific problems, we might be of better help to you.
I assume with dynamically colored rectangles, you mean simply changing the color during runtime. Well you simply give the rectangle a name, and change the color property of it in code. Like this: rectangle.Color = Something.
You might want to start out with a simpler project just to learn some of the basics, maybe a little game where the player has to move a rectangle from one side of the screen to the other using the arrow keys or mouse, upon which a score is incremented or something. This will help teach you how the coordinate system works, among other things.
To draw stuff using code, you can create a new Sprite or MovieClip object and use its graphics property to draw primitive shapes (rectangles, etc.) to it at runtime.
I have an image of a basic game map. Think of it as just horizontal and vertical walls which can't be crossed. How can I go from a png image of the walls to something in code easily?
The hard way is pretty straight forward... it's just if I change the image map I would like an easy way to translate that to code.
Thanks!
edit: The map is not tile-based. It's top down 2D.
I dabble in video games, and I personally would not want the hassle of checking the boundaries of pictures on the map. Wouldn't it be cleaner if these walls were objects that just happened to have an image property (or something like it)? The image would display, but the object would have well defined coordinates and a function could decide whether an object was hit every time the player moved.
I need more details.
Is your game tile based? Is it 3d?
If its tile based, you could downsample your image to the tile resolution and then do a 1:1 conversion with each pixel representing a tile.
I suggest writing a script that takes each individual pixel and determines if it represents part of a wall or not (ie black or white). Then, code your game so that walls are built from individual little block, represented by the pixels. Shouldn't be TOO hard...
If you don't need to precompute anything using the map info. You can just check in runtime logic using getPixel(x,y) like function.
Well, i can see two cases with two different "best solution" depending on where your graphic comes from:
Your graphics is tiled, and thus you can easily "recognize" a block because it's using the same graphics as other blocks and all you would have to do is a program that, when given a list of "blocking tiles" and a map can produce a "collision map" by comparing each tile with tiles in the "blocking list".
Your graphics is just some graphics (e.g. it could be a picture, or some CG graphics) and you don't expect pixels for a block to be the same as pixels from another block. You could still try to apply an "edge detection" algorithm on your picture, but my guess is then that you should rather split your picture in a BG layer and a FG layer so that the FG layer has a pre-defined color (or alpha=0) and test pixels against that color to define whether things are blocking or not.
You don't have much blocking shapes, but they are usually complex (polygons, ellipses) and would be unefficient to render using a bitmap of the world or to pack as "tile attributes". This is typically the case for point-and-click adventure games, for instance. In that case, you're probably to create path that match your boundaries with a vector drawing program and dig for a library that does polygon intersection or bezier collisions.
Good luck and have fun.