I'm working with a few programming buddies to create an AS interface to the kinect and one problem we're running into is image differencing. We need to be able to throw out image data that doesn't change from image to image so we can pin-point only things that are moving(i.e. people).
Anyone have any experience with this or a direction we can go?
I would consider creating a pixel bender shader to find the difference and also do any other math or tracking. Pixel bender gets its own thread outside of the normal flash player so you can get some more horse power for your setup. Pixel Bender shaders can be applied to bitmaps, vectors, or video so I think it is perfect for this project. Good Luck!
http://www.adobe.com/devnet/flash/articles/pixel_bender_basics.html
And is is a full collection of shaders including difference
Take a look at the threshold method on BitmapData.
It'll allow you to do this stuff. Their docs have a simple example so check that out.
It might be a long shot, and this is just me rambling, but in sound theory (strange how I'm relating it to image cancellation, but here goes...) the concept of cancellation is when you take a wave sample and add its inverse. It's how you make acapellas from instrumentals + originals or instrumentals from acapellas + originals.
Perhaps you can invert the new image and "normalize" the two to get your offsets? I.e. the first image is 'black on white' and the second image is 'white on black', and then detect the differences for the bitmap data. I know I did a similar method of finding collisions with AS3 a few years back. This would, in theory, cancel out any 'repeating' pixels and leave you with just the changes from the last frame.
With BitmapData your values are going to be from 0 to 255, so if you can implement a cancellation (because a lot of parts of the image are going to stay the same from frame t frame) then you can easily find the changes from the previous frame.
Just a thought! Whatever your solution is it's going to have to be quick in order to beat the flash runtimes' slow speeds. Your Kinect read FPS rate will be greatly hindered with bad code.
Here is some frame differencing code I wrote awhile back. It uses bitmapData: http://actionsnippet.com/?p=2820
I also used this to capture moving colors in a video feed: http://actionsnippet.com/?p=2736
Related
I made a simple game where squares collect crystals and bring them to a base and replicate. They are just .png images that rotate and move and yet when their number becomes greater than 500, the game starts to lag out. In Java I'm able to do a similar thing with 30,000 units. Could I be doing something wrong or is Flash just not that capable?
I'm using Flash Builder.
I get the image like this:
[Embed(source="../lib/red.png")]
public var redImgClass:Class;
public var redImg = new redImgClass();
Then I pass redImg to a "unit" class which takes an instance of "Bitmap"
I change its "rotation" and x,y members every frame.
Am I doing something wrong here?
you're not using Stage3D. If you use Starling, ND2D or write your own Stage3D wrapper you'll be able to get better performance.
You can also take a look at Jackson Dunstan's blog, this post is especially helpful: http://jacksondunstan.com/articles/2279
Another possible answer is to use blitting, that is, use a single Bitmap object to draw everything on via copyPixels(). This requires that your rotating crystal PNG be replicated into a sequence of rotated images, which you then use instead of directly changing rotation property. This approach is more performance-friendly, and does not depend on video card performance like Stage3D does.
Adobe's manual on blitting
Some discussion on blitting done by game devs
Daniel's answer is correct in that you should use the Stage3D APIs for greater performance. He didn't however mention that you should seriously consider using Starling, which wraps the Stage3D API with much easier to use classes:
Learn more about Starling here.
Example of the level of performance you could expect from Stage3D.
Starling is what you`re looking for (http://gamua.com/starling/)
I'm making a flash game, and I can't decide to use a bigger stage or a smaller one, with scrolling background to make it run smoother. I's going to be some kind of strategy game if it matters.
Thanks
One option is to have a bitmap object the size of your stage for example 800x600, then draw your objects into the bitmapdata of that bitmap using copyPixels this is known as blitting and is pretty fast.
Another option is to just use the flash display list and add every object as sprites onto the stage.
Second method is easier to handle in terms of mouse events and stuff.
My advice is to start with the second option and see if performance is enough, if not go with option 1.
There are many, many variables that determine the performance of your application.
To answer your question, a smaller stage area will make your program run faster. The amount of difference will depend on the way your application deals with display objects. Flash will not render things that are completely outside the stage bounds. So keeping only those objects that are needed at any given time on the stage is a good practice.
using flash player 11's new stage3D features (even for 2D stuff) will likely make your game very smooth. Lots of good frameworks out there that can take care of the low-level stuff if you don't want to get into it. For 2D, starling is very easy to get started with, and seems to be Adobe's favored framework.
At a bare minimum, make sure you use GPU acceleration in your output/compiler options.
There are LOTS of other tips for optimization people could get into, but that is better suited for google searches as Stackoverflow is about specific questions.
I'm making a game similar to 'Run' (http://www.albinoblacksheep.com/games/run) but I can't quite figure out the floor part. I'm not wanting the sides and a ceiling like in 'Run', just the main floor.
I'm new to Flash game development (AS3) but I know the basics. I realise the character isn't moving and is just turning (the level itself moves). How do a make a continuous floor, do I have to make a very long .fla file, or do I have to do this with code?
All ideas and help appreciated, Thanks. =)
You should use Tiles. Basically, a tile game consists of a lot of squared tiles, which are inserted when appear in screen and removed when goes out.
In your case, maybe you could use a big tile, with screen's size.
You can visualize a good example here, also a very good resource for gamedev on Flash.
You need to generate sprites of the edge of the screen and either recycle them when their x < some value or dispose and create new ones.
I think you can just use Bitmap.draw() to draw different pixels on a Bitmap that you've applied a 3D transformation to. You can see the basic concept illustrated here.
I hope this isn't too open ended.
I'm wondering if there is a better (more battery-friendly) way of doing this --
I have a small HTML 5 game, drawn in a canvas (let's say 500x500). I have some objects whose positions I update every 50ms or so. My current implementation re-draws the entire canvas every 50ms. I can't imagine that being very good for battery life on mobile platforms.
Is there a better way to do this? This must be a common pattern with games.
EDIT:
as requested, here are some more updates:
Right now, the objects are geometric primitives drawn via arcs and lines. I'm not opposed to making these small png/jpg/gif files instead of that'd help out. These are small graphics -- just 15x15 or so.
As the game progresses, more and more of the screen changes at a time. However, at the start, the screen changes relatively slowly (the objects randomly moved a few pixels every 50ms).
Nearly every game with continuous animation like this redraws everything every frame; clever updating algorithms are only applicable when a small part of the screen is changing and there is a nice rule to figure out what is overlapping that part.
Here is some general optimization advice:
Make sure that as much as possible of your graphics are handled by the GPU and not the CPU. (This may be impossible if the user's browser does not use the GPU for 2D canvas rendering, but you can expect upgrades may change that as HTML5 gaming gains popularity.)
This means that you should avoid elaborate clever algorithms in favor of doing as little work as possible in JS code — except that avoiding performing a lot of drawing when it is easy to determine that it will be invisible (e.g. outside the bounds of the screen) is generally worthwhile.
If your target platforms support it (generally not the case for current mobile devices), try using WebGL instead of 2D Canvas. You will have to do more detail work, but WebGL allows you to use operations which are much more likely to be provided efficiently by the GPU hardware.
If your game becomes idle — that is, nothing is actually animating at the moment — stop redrawing. Stop your update loop until the user interacts with the game or a timeout occurs.
It may be helpful for you to add to your question details of what types of graphics you are drawing (e.g. are you using sprites, or geometric primitives? Are you drawing images rotated/scaled? Does most of the screen change or just a few small objects? Are you blending many layers?) and perhaps even a screenshot or two; then we can suggest what sort of optimizations are suitable for your particular game.
Don't draw a background, make it an image and set the CSS background-image of the canvas.
Using requestAnimationFrame should help with battery life.
http://paulirish.com/2011/requestanimationframe-for-smart-animating/
Only do a redraw if something has actually changed. If you haven't already, introduce the concept of invalidations. (ie, the canvas is valid so nothing redraws until something moves. Anything moving within the window of the canvas causes the canvas to become invalid, thus needing a redraw)
If you want to be battery friendly you can use Crafty. This game engine is using modern CSS3 technology so it doesn't need to update a canvas all the time. Look at this example game here.
The way you don't want to redraw entire canvas every frame, it only can be the "Dirty-Check" or "Dirty Matrix" algorithms.
Dirty-check seems more efficient than entire redraw. but I think it depends on your render implementation.
it is not necessary to use it if you are using canvas2D to render. Nearly every game has complex sprites and animation. if you use dirty-check, when a part of sprite or background map need to update, you have to figure out what is overlapping this part. and then clearRect this small area of canvas, and then redraw every sprite or map. etc, what is overlapping.
It means your had to run canvas render api more times than normal render implementation because of the overlapping part. And Canvas2d render performance usually does't sounds efficient.
But if you use WebGL, that maybe quite difference. even though I am not family with WebGL, I do knew that maybe more efficient. Dirty-Check should be a good Choice to match your propose.
I'm brand new to Flash (and game programming, really), but want to learn a bit of it. My overall learning project is to create a Monopoly clone in Flash. Unfortunately, I'm struggling to get over even my first hurdle - how to create the board graphically, and how then to deal with it in the code. So far, my thoughts are to break the board down into the different sizes of tiles (the normal property ones, the corner 4 and a large one for the middle section), then somehow place these all in the correct position relative to each other and keep that positioning correct as the pieces (and thus the camera view) move about the board. (And, hopefully some day have a zooming ability too...)
Is this a good approach, or is there a better one? Does anyone know where I can find a tutorial specifically on creating board games in Flash (any sort really, wouldn't have to be Monopoly but just a game that has a board which tokens move across - and preferably which has to pan as well).
Also, as an aside, is there any way to have a dynamically coloured rectangle in a flash MovieClip (like you can have dynamic textboxs)? I ask because it would be useful if there was, as I could generate every property tile with just one MovieClip which took a name, a value and a colour...
everything you describe here you can do pretty easily once you get the hang of component sprites. personally i would make a single sprite that will then hold all of the "tiles" in the game, this would allow you to "zoom" the board while keeping all the pieces relative:
if you create this parent to have an addTile() and getTile(index:int):Sprite method then you can easily push the tiles and retrieve them from an array, so that Go is at index 0, old kent road is at 1 etc. that way you can use a single integer value to determine the position of the player piece as you can then use getTile(int).x etc.
the position of the tiles themselves can be worked out relative to the others. if you have a tile that is 20px wide and 40px high then you can position the tile as x = index * 20 for the first row, after the initial 11, you need to rotate them all and then use the y index instead (rotation = 90; x = 11*20; y = (index-11)*20) this will depend exactly on your origin point of your Sprite.
to draw coloured boxes you use the graphics of the Sprite, there are plenty of tuts on API drawing out there, but here is a basic box of 10x10px:
var drawing:Sprite = new Sprite();
drawing.graphics.beginFill(0x0000FF);
drawing.graphics.drawRect(0, 0, 10, 10);
drawing.graphics.endFill();
Another approach to your question could be to learn about Object Oriented Programming. That may not solve your representing the board graphically straight away, but it would definitely help you structure your game.
With OOP, you could define a "Property" Class with a set of properties such as streetName , color , price etc... I haven't played Monopoly in a while but you can get the general idea, i.e. to create a base object and make it specific by setting the object's properties. Your question about the colored rectangle can actually apply to other properties, a great way to avoid unnecessary repetition.
Broadly speaking OOP tends to emulate real life situations, so you could actually look at your Monopoly game, break it into its various parts, find common properties etc... I won't start a lesson here :) I'd be pretty bad at it, but there's plenty of resources out there . Look for OOP, Design Patterns & Actionscript3.
After a little research, you may find that your question about how to handle graphics may not be such a problem after all.
Your questions are way too general. I'm sure you don't want us to walk you through your whole project right?
Now to gain some experience, I suggest to you simply work through a few flash gaming tutorials. There are a LOT of those, I googled for 2-3 seconds and found this:
http://pelfusion.com/tutorials/35-flash-game-development-tutorials-fla-files/
I'm sure you feel disappointed by this answer, but this is the first step in solving your own problems. The internet has more than enough general game tutorials already. If you have specific problems, we might be of better help to you.
I assume with dynamically colored rectangles, you mean simply changing the color during runtime. Well you simply give the rectangle a name, and change the color property of it in code. Like this: rectangle.Color = Something.
You might want to start out with a simpler project just to learn some of the basics, maybe a little game where the player has to move a rectangle from one side of the screen to the other using the arrow keys or mouse, upon which a score is incremented or something. This will help teach you how the coordinate system works, among other things.
To draw stuff using code, you can create a new Sprite or MovieClip object and use its graphics property to draw primitive shapes (rectangles, etc.) to it at runtime.