I am working on a project, which uses PureMVC Standard. Now I need to add a new module SWF, which also uses Standard. I know the solution is to replace Standard MVC with MultiCore MVC, but there are two problems:
Standard's package structure is different from MultiCore's - do I have to correct this manually?
Under standard mvc framework, some code in the constructor of Mediator is allowed, while in MultiCore, this seems to be absolutely forbidden - so do I have to change so many constructors to get rid of this?
And finally: Other than replacing Standard with MultiCore, is there any better way to resolve the problem?
I am unaware of any other good methods for changing the package structure, other than global search-and-replace across a project. I have also not had problems doing this.
For Mediators, I have never had a problem with initializing simple variables (ints, Booleans, Arrays, etc) in the constructor, but anything else gets deferred to an onRegister (especially anything involving the stage in any way) and look something like:
public class MyMediator extends Mediator implements IMediator {
public static const NAME : String = "MyMediator";
// internal states
private var foo : int;
public function MyMediator (viewComponent : Object) {
super(NAME, viewComponent);
foo = 0;
trace("MyMediator()", main_mc);
}
override public function onRegister () : void {
main_mc.addEventListener(...);
}
protected function get main_mc () : Main {
return viewComponent as Main;
}
}
Having sparse contructors in AS3 is a good idea anyway, because constructor code is always interpreted and not compiled.
Out of habit now, I use multicore for all projects, even when I have a single core. This makes reusing mediators and proxies in new projects much easier.
Related
I have an application which will be using large numbers of assets. In order to better handle that I chose to use a registry to hold all the assets so they are accessible across the entire application:
package
{
public class SpriteRegistry
{
public static var SPRITENAME = "link to image file";
public function SpriteRegistry()
{
}
}
}
What I would like to do is create an XML document and list off the file name and link so that when the application starts, this registry creates its variables which are freely accessible from that list without me needing to hard code any content directly into it.
Specifically what I need to know is how to get the "public static" effect or how to get an equivalent effect for variables that I CAN dynamically produce.
More info:
I am using a function that loads a sprite texture into a sprite object based on a string variable called mouseAttribute:
loadGraphic(SpriteRegistry[currentAttribute+"Texture"]);
Basically it's like a painting program but for a level editor for a video game.
The problem is that I'm eventually going to have 100+ sprites that I need to application to load and then I need the loadGraphic function to still be able to point effectively to the target sprite.
The library I'm using also needs me to embed the source into a class before I can pull it into the sprite object:
[Embed(source = "/Images/GridTile.png")]
public static var gridTileTexture:Class;
The reason I'm trying to avoid an array is because it means that I will have to search through an array of 100+ objects to find one sprite every time I click a single grid on the editor. That is going to chug.
It's very simple - just use a static function, which will return the XML. So you will need to load the XML file somehow (you decide where, but your registry class should have reference to it). Something similar to this:
private static var _xml:XML;
public static function initialize(xml:XML):void {
_xml = xml;
}
public static function getXML():XML {
return _xml;
}
So you will use it like that:
SpriteRegistry.initialize(loadedXML); // done only once when you initialize your app
trace(SpriteRegistry.getXML().someValue); // someValue is directly from the XML
It's a common used strategy and most of the times you would have something like an app initializer - something to load and instantiate all the things, then pass them to some registries that keep them stored for faster and global usage.
Edit:
After reading your further comments, I can't see any big change - everything would be ok with this resolution.
If you are worried about the 'need to search through array' - just do it as an object! This way you will be able to directly access the proper one using a key exactly like you pointed:
private static var _registry:Object;
public static function initialize(xml:XML):void {
// loop through xml and insert items
_registry[key] = resource;
}
public static function getResource(id):Object {
return _registry[id];
}
This way you can use it like:
SpriteRegistry.getResource(currentAttribute+"Texture");
My personal opinion is that you should avoid statics wherever possible. Instead, you should just create a single instance and provide it through dependency injection where needed.
If you were to go with that approach, you could do something like:
public function getSprite(spriteName:String):Class{
return this[spriteName];
}
or
public function getSprite(spriteName:String):Class{
return yourDictionaryOrObject[spriteName];//I'd implement it this way
}
Otherwise you could go with something like:
public static function getSprite(spriteName):Class{
return ThisHonkingBigUnnchangeableClassname[spriteName];
}
What I would not do is create a Dictionary in a static-only Class, because you're almost inevitably going to wind up with global mutable state.
Discussion, per request
Why would you want to create an instance and pass it, rather than hard-code a reference to a specific Class? A lot of the answers are covered in the global mutable state link above, but here are some that are specific to this kind of problem:
Flexibility. Say you build everything with the idea that you'd only have one set of resources being used in parallel, then you discover you need more than one--for example you might need one for color blind users, or multiple languages, or thumbnails vs. full-sized. If you hard-code to a static, then you'll have to go in every place that was hard-coded and make some sort of change to use a different set, whereas if you use DI, you just supply a different instance loaded with different resources, and done.
Testability. This is actually covered in the link, but I think it bears pulling out. If you want to run a quick test on something that needs a resource, you have to have that static "thing" and you can't change anything about it. It then becomes very difficult to know if the thing you're actually testing is working or if it just appears to be working based on the current implementation of the "thing."
Resource use: everything about an all-static Class exists from the time the swf loads to the time it unloads. Instances only exist from when you instantiate them until they are garbage collected. This can be especially important with resource files that contain embedded assets.
I think the important thing about Frameworks is to realize how they work. The major ones used in ActionScript work the same way, which is they have a central event dispatcher (event bus) that anything loaded to the framework can get a reference to by declaring an interest in it by asking for it to be injected. Additionally, they watch the stage for an event that says that something has been added (in RL it's ADDED_TO_STAGE, whereas in Mate it's the Flex event CREATION_COMPLETE). Once you understand these principles, you can actually apply them yourself with a very light hand without necessarily needing everything that comes along with a framework.
TL;DR
I usually try to avoid answering questions that weren't asked, but in this case I think it would be helpful to discuss an entirely different approach to this problem. At root, the solution comes down not to injecting an entire resource instance, but instead just injecting the resource that's needed.
I don't know what the OP's code is like, but this solution should be general enough that it would work to pass named BitmapDatas to anything that implements our Interface that is capable of dispatching against whatever IEventDispatcher we set as the eventBus (this could be the stage, a particular DisplayObject, or an EventDispatcher that is created just for the purpose.
Note that this code is strikingly similar to code I have in production ;).
public class ResourceManager {
//this can be loaded dynamically, or you can create subclasses that fill the registry
//with embedded Classes in the constructor
protected var registry:Dictionary = new Dictionary();
protected var _eventBus:IeventDispatcher;
public function registerResource(resourceName:String, resourceClass:Class):void {
var bitmap:BitmapData = new resourceClass as BitmapData;
if (resourceClass) {
registry[resourceName] = bitmap;
} else {
trace('Class didn\'t make a BitmapData');
}
}
public function getResource(resourceName:String):BitmapData {
var resource:BitmapData = registry[resourceName];
if (!resource) trace('there was no resource registered for', resourceName);
}
public function get eventBus():IEventDispatcher {
return _eventBus;
}
public function set eventBus(value:IEventDispatcher):void {
if (value != _eventBus){
if (_eventBus) {
_eventBus.removeEventListener(YourCustomEvent.GET_RESOURCE, provideResource);
}
_eventBus = value;
if (_eventBus) {
_eventBus.addEventListener(YourCustomEvent.GET_RESOURCE, provideResource);
}
}
}
protected function provideResource(e:YourCustomEvent):void {
var client:IBitmapResourceClient = e.target as IBitmapResourceClient;
if (client) {
client.resource = getResource(e.resourceName);//your custom event has a resourceName property that you populated when you dispatched the event.
}
}
}
Note that I didn't provide the Interface or the custom event or an example implementation of the Interface due to the fact I am on my lunch break, but if anyone needs that to understand the code please post back and I'll fill that in.
I currently pass a reference to my model through the constructor to any class that needs it in my simple mvc pattern, this can get annoying at times when it starts to go deeper.
How do Classes such as LoadMax allow you from anywhere to simple import the class, and do something like addChild(LoaderMax.getContent("bg"));? Replicating this should surely be a good way to have my model work, without the complexity of big frameworks?
Statics are your friend
As previous answers have noted, TweenLite/Max etc. makes heavy use of static members to get work done. This is exactly like the Math class, for example, and can be a very convenient design pattern. You have global access to the class, and that can definitely alleviate the issue of getting access to variables through deeply nested classes.
Statics are the enemy
Statics, however, bring certain problems to the table. Most importantly, they tend to reduce flexibility and modularity of classes through the often unnecessary addition of tightly coupled relationships. It's a bit like pouring concrete over your application. It does work, but changing behavior becomes difficult as project features change.
Static members != instance members
Note, very clearly, that a static member "belongs" to the class itself, and not an instance of that class. Static members have no access to instance members. This causes troubles when you want to mix these members up in logic. You tend to have to make everything static (the so-called "static-cling" effect). Static patterns are often argued to be argued to be "anti" object-oriented, for precisely this reason. Once you build a structure on a static pattern you tend to lose many of the principles that makes OOD powerful.
In small does, they're pretty nice
That all being said - TweenLite is a great example of a static pattern that is totally appropriate - its a utility package, one that logic is not dependent on. And that should probably be how you leverage statics, too.
To reduce reliance on statics, or even global vars, it does often mean writing more code, but the flexibility in app structure gained is often quite worth it. #Marty_Wallace has a pretty good solution imo.
Demeter and the Paperboy
Finally, I'll just mention the Law of Demeter, or the Principle of Least Knowledge, and the related Paperboy and the Wallet example, which is often pointed to in discussions of statics:
Each unit should have only limited knowledge about other units: only
units "closely" related to the current
unit.
Each unit should only talk to its friends; don't talk to strangers.
Only talk to your immediate friends.
Hopefully that sheds a little bit of light on a fairly complicated and not-often obvious issue.
This is done using the static namespace, however I discourage the use of this.
package
{
public class Main
{
public static function sayHell():void
{
trace("hello!");
}
}
}
You can now call sayHello() like this from anywhere in the application (assuming you've imported the class).
Main.sayHello();
Another thing you can do (to make the entire class accessible from within the application) is create a static property that refers to the class itself:
package
{
public class Something
{
public static var instance:Something;
public function Something()
{
instance = this;
}
public function someFunction():void
{
trace('hello!');
}
}
}
Which you can now use like so:
Something.instance.someFunction();
The only thing to note here is that you need to create an instance of Something for this to work to call the constructor and define instance.
What I would do
Create a base class for all objects in your application
Create a manager class that takes care of these objects
Create a setter within your base class to define the manager
Here's an example:
Base
package
{
public class Base extends Object
{
private var _manager:Manager;
public function set manager(m:Manager):void
{
_manager = m;
init();
}
protected function init():void
{
manager.someFunction();
}
public function get manager():Manager{ return _manager; }
}
}
Manager
package
{
public class Manager extends Object
{
public function someFunction():void
{
trace('hello!');
}
}
}
Now anything that extends Base will have access to anything held in Manager via the manager getter property. All you need to do is make sure you define the manager, which is easily achieved from within anything that extends Base like so:
var something:SomeExtendingClass = new SomeExtendingClass();
something.manager = manager;
The example you gave is just a static method, but to answer your question about a global instance of a class:
package myPackage
{
public var globalVariable:MyClass = new MyClass();
}
You can access it with:
import myPackage.globalVariable;
trace(globalVariable);
I think you have to rethink in which way you want to name your classes.
You can instantiate whatever class you want, at run-time, but to access a instance by name, you have to make changes in your structure. For example, the getContent() function you mentioned in LoaderMax, all it does is to search in an array for the given loader that matchs the name, among other things. You can read the name variable comment for a description.
A name that you use to identify the loader instance. This name can be fed to the getLoader() or getContent() methods or traced at any time. Each loader's name should be unique. If you don't define one, a unique name will be created automatically, like "loader21".
So in this system, you have to name every single member (loaders in this case) if you want to be able to search them. Because if I call getClassInstance("myinstance"), what is "myinstance" representing? Where should I name it?
That said, if you want to do it for DisplayObjects only, you can use getChildByName. But again, you have to name every DisplayObject (just set the name variable).
Hope this helps.
So, coming upon the subject of Factories, I'm wondering how they are set up.
From where I stand, I can see 3 types of Factories:
All In One
A factory that basically contains all of the classes used in an application. It feels like it is just having a factory for the sake of having a factory, and doesn't really feel structured.
Example (Where ClassA, Class B, and ClassC have nothing in common except being in the same App):
class Factory
{
public static function buildClassA()
public static function buildClassB()
public static function buildClassC()
}
Code samples provided are in PHP. However, this question is language-agnostic.
Built-In Factory
The next one is mixing in static functions with the regular functions in order to make special creation patterns (see this question)
Example:
class ClassA
{
public static function buildClass()
public function __construct()
}
Factory On-the-Side
The last one I can think of is having a factory for individual classes, or individual sets of classes. This just seems to variable to be used in an uniform manner.
Example (Where ClassA, B, and C are related, and 1, 2, and 3 are related):
class FactoryAlpha
{
public static function buildClassA()
public static function buildClassB()
public static function buildClassC()
}
class FactoryNumeric
{
public static function buildClass1()
public static function buildClass2()
public static function buildClass3()
}
My question is: Are all of these bad ideas, are any of them bad ideas? Are there other ways of creating factories? Are any of these actually good ideas? What is a good/best way to create Factories.
The point of a factory seems to be to have the code that uses it not need to know which concrete class will be constructed (this should be handled by configuring the factory). That seems to rule out "All-in One" and "Factory-on-the-Side".
I like the approach that Java libraries often use: You have a static method that creates the Factory. The Factory has a getInstance method that creates the instance. This gives you two points of configuration (via system properties): The default FactoryImpl has a number of settings, such as the class it should produce, and if these configuration options are not enough, you can also swap out the FactoryImpl altogether.
As for "All-in One" vs "Factory-on-the-Side", a Factory should not produce unrelated classes I think. Again, it Java terms, every factory produces instances of a certain interface.
"All-in-One" sounds like something that should be replaced with Dependency Injection (where you have a container that produces all kinds of instances and injects them into the application).
If you are really interested in "Preferred technologies", I'd replace them all with Dependency Injection.
If that seems to heavy, just remember that you may not be seeing every use for your factory so don't "New" a hard-coded class in your factory. Instead, have a "Setter" that can specify what class needs to be injected.
This will come in handy later when you are unit testing and need to start injecting mock classes.
But as you make this more general, abstract and reusable, you'll end up back at DI. (Just don't say I didn't warn you)
There's really just two standard sorts of factories, at least according to GOF and the slew of patterns books that followed: The basic Factory, and the Abstract Factory.
A Factory generally returns a concrete instance that the caller refers to through an interface, like so:
// createWidget() here instantiates a BigWidget or SmallWidget or whatever the context calls for
IWidget widget = WidgetFactory.createWidget(someContextValue);
Using a factory with an interface in this way keeps the caller from being coupled into a specific type of the returned object. Following the venerable Single Responsibility Principle, a factory should do one thing, that is, return a concrete instance of the interface that was called for, and nothing more. A basic factory should only have the job of creating one type of object.
An Abstract Factory, on the other hand, can be thought of as a factory of factories, and might be closer to what you were thinking of as an "all in one" factory. An Abstract Factory is usually configured at start-up to return a group of related factories, for instance factories that might create a particular family of GUIs depending on a given context. This is an example of Dependency Inversion that has largely been replaced by using IOC containers like Spring.
As we all know, when we derive a class and use polymorphism, someone, somewhere needs to know what class to instanciate. We can use factories, a big switch statement, if-else-if, etc. I just learnt from Bill K this is called Dependency Injection.
My Question: Is it good practice to use reflection and attributes as the dependency injection mechanism? That way, the list gets populated dynamically as we add new types.
Here is an example. Please no comment about how loading images can be done other ways, we know.
Suppose we have the following IImageFileFormat interface:
public interface IImageFileFormat
{
string[] SupportedFormats { get; };
Image Load(string fileName);
void Save(Image image, string fileName);
}
Different classes will implement this interface:
[FileFormat]
public class BmpFileFormat : IImageFileFormat { ... }
[FileFormat]
public class JpegFileFormat : IImageFileFormat { ... }
When a file needs to be loaded or saved, a manager needs to iterate through all known loader and call the Load()/Save() from the appropriate instance depending on their SupportedExtensions.
class ImageLoader
{
public Image Load(string fileName)
{
return FindFormat(fileName).Load(fileName);
}
public void Save(Image image, string fileName)
{
FindFormat(fileName).Save(image, fileName);
}
IImageFileFormat FindFormat(string fileName)
{
string extension = Path.GetExtension(fileName);
return formats.First(f => f.SupportedExtensions.Contains(extension));
}
private List<IImageFileFormat> formats;
}
I guess the important point here is whether the list of available loader (formats) should be populated by hand or using reflection.
By hand:
public ImageLoader()
{
formats = new List<IImageFileFormat>();
formats.Add(new BmpFileFormat());
formats.Add(new JpegFileFormat());
}
By reflection:
public ImageLoader()
{
formats = new List<IImageFileFormat>();
foreach(Type type in Assembly.GetExecutingAssembly().GetTypes())
{
if(type.GetCustomAttributes(typeof(FileFormatAttribute), false).Length > 0)
{
formats.Add(Activator.CreateInstance(type))
}
}
}
I sometimes use the later and it never occured to me that it could be a very bad idea. Yes, adding new classes is easy, but the mechanic registering those same classes is harder to grasp and therefore maintain than a simple coded-by-hand list.
Please discuss.
My personal preference is neither - when there is a mapping of classes to some arbitrary string, a configuration file is the place to do it IMHO. This way, you never need to modify the code - especially if you use a dynamic loading mechanism to add new dynamic libraries.
In general, I always prefer some method that allows me to write code once as much as possible - both your methods require altering already-written/built/deployed code (since your reflection route makes no provision for adding file format loaders in new DLLs).
Edit by Coincoin:
Reflection approach could be effectively combined with configuration files to locate the implmentations to be injected.
The type could be declared explicitely in the config file using canonical names, similar to MSBuild <UsingTask>
The config could locate the assemblies, but then we have to inject all matching types, ala Microsoft Visual Studio Packages.
Any other mechanism to match a value or set of condition to the needed type.
My vote is that the reflection method is nicer. With that method, adding a new file format only modifies one part of the code - the place where you define the class to handle the file format. Without reflection, you'll have to remember to modify the other class, the ImageLoader, as well
Isn't this pretty much what the Dependency Injection pattern is all about?
If you can isolate the dependencies then the mechanics will almost certainly be reflection based, but it will be configuration file driven so the messiness of the reflection can be pretty well encapsulated and isolated.
I believe with DI you simply say I need an object of type <interface> with some other parameters, and the DI system returns an object to you that satisfies your conditions.
This goes together with IoC (Inversion of Control) where the object being supplied may need something else, so that other thing is automatically created and installed into your object (being created by DI) before it's returned to the user.
I know this borders on the "no comment about loading images other ways", but why not just flip your dependencies -- rather than have ImageLoader depend on ImageFileFormats, have each IImageFileFormat depend on an ImageLoader? You'll gain a few things out of this:
Each time you add a new IImageFileFormat, you won't need to make any changes anywhere else (and you won't have to use reflection, either)
If you take it one step further and abstract ImageLoader, you can mock it in Unit Tests, making testing the concrete implementations of each IImageFileFormat that much easier
In vb.net, if all the image loaders will be in the same assembly, one could use partial classes and events to achieve the desired effect (have a class whose purpose is to fire an event when the image loaders should register themselves; each file containing image loaders can have use a "partial class" to add another event handler to that class); C# doesn't have a direct equivalent to vb.net's WithEvents syntax, but I suspect partial classes are a limited mechanism for achieving the same thing.
Method chaining is the only way I know to build fluent interfaces.
Here's an example in C#:
John john = new JohnBuilder()
.AddSmartCode("c#")
.WithfluentInterface("Please")
.ButHow("Dunno");
Assert.IsNotNull(john);
[Test]
public void Should_Assign_Due_Date_With_7DayTermsVia_Invoice_Builder()
{
DateTime now = DateTime.Now;
IInvoice invoice = new InvoiceBuilder()
.IssuedOn(now)
.WithInvoiceNumber(40)
.WithPaymentTerms(PaymentTerms.SevenDays)
.Generate();
Assert.IsTrue(invoice.DateDue == now.AddDays(7));
}
So how do others create fluent interfaces. How do you create it? What language/platform/technology is needed?
The core idea behind building a fluent interface is one of readability - someone reading the code should be able to understand what is being achieved without having to dig into the implementation to clarify details.
In modern OO languages such as C#, VB.NET and Java, method chaining is one way that this is achieved, but it's not the only technique - two others are factory classes and named parameters.
Note also that these techniques are not mutually exclusive - the goal is to maximize readabilty of the code, not purity of approach.
Method Chaining
The key insight behind method chaining is to never have a method that returns void, but to always return some object, or more often, some interface, that allows for further calls to be made.
You don't need to necessarily return the same object on which the method was called - that is, you don't always need to "return this;".
One useful design technique is to create an inner class - I always suffix these with "Expression" - that exposes the fluent API, allowing for configuration of another class.
This has two advantages - it keeps the fluent API in one place, isolated from the main functionality of the class, and (because it's an inner class) it can tinker with the innards of the main class in ways that other classes cannot.
You may want to use a series of interfaces, to control which methods are available to the developer at a given point in time.
Factory Classes
Sometimes you want to build up a series of related objects - examples include the NHibernate Criteria API, Rhino.Mocks expectation constraints and NUnit 2.4's new syntax.
In both of these cases, you have the actual objects you are storing, but to make them easier to create there are factory classes providing static methods to manufacture the instances you require.
For example, in NUnit 2.4 you can write:
Assert.That( result, Is.EqualTo(4));
The "Is" class is a static class full of factory methods that create constraints for evaluation by NUnit.
In fact, to allow for rounding errors and other imprecision of floating point numbers, you can specify a precision for the test:
Assert.That( result, Is.EqualTo(4.0).Within(0.01));
(Advance apologies - my syntax may be off.)
Named Parameters
In languages that support them (including Smalltalk, and C# 4.0) named parameters provide a way to include additional "syntax" in a method call, improving readability.
Consider a hypothetical Save() method that takes a file name, and permissions to apply to the file after saving:
myDocument.Save("sampleFile.txt", FilePermissions.ReadOnly);
with named parameters, this method could look like this:
myDocument.Save(file:"SampleFile.txt", permissions:FilePermissions.ReadOnly);
or, more fluently:
myDocument.Save(toFile:"SampleFile.txt", withPermissions:FilePermissions.ReadOnly);
You can create a fluent interface in any version of .NET or any other language that is Object Oriented. All you need to do is create an object whose methods always return the object itself.
For example in C#:
public class JohnBuilder
{
public JohnBuilder AddSmartCode(string s)
{
// do something
return this;
}
public JohnBuilder WithfluentInterface(string s)
{
// do something
return this;
}
public JohnBuilder ButHow(string s)
{
// do something
return this;
}
}
Usage:
John = new JohnBuilder()
.AddSmartCode("c#")
.WithfluentInterface("Please")
.ButHow("Dunno");
AFAIK, the term fluent interface does not specify a specific technology or framework, but rather a design pattern. Wikipedia does have an extensive example of fluent interfaces in C♯.
In a simple setter method, you do not return void but this. That way, you can chain all of the statements on that object which behave like that. Here is a quick example based on your original question:
public class JohnBuilder
{
private IList<string> languages = new List<string>();
private IList<string> fluentInterfaces = new List<string>();
private string butHow = string.Empty;
public JohnBuilder AddSmartCode(string language)
{
this.languages.Add(language);
return this;
}
public JohnBuilder WithFluentInterface(string fluentInterface)
{
this.fluentInterfaces.Add(fluentInterface);
return this;
}
public JohnBuilder ButHow(string butHow)
{
this.butHow = butHow;
return this;
}
}
public static class MyProgram
{
public static void Main(string[] args)
{
JohnBuilder johnBuilder = new JohnBuilder().AddSmartCode("c#").WithFluentInterface("Please").ButHow("Dunno");
}
}
Sometime ago I had the same doubts you are having now. I've done some research and now I'm writing a series of blog posts about techinics of designing a fluent interface.
Check it out at:
Guidelines to Fluent Interface design in C# part 1
I have a section there about Chaining X Nesting that can be interesting to you.
In the following posts I will talk about it in a deeper way.
Best regards,
André Vianna
Fluent interface is achieved in object oriented programming by always returning from your methods the same interface that contains the method. Consequently you can achieve this effect in java, javascript and your other favorite object oriented languages, regardless of version.
I have found this technique easiest to accomplish through the use of interfaces:
public interface IFoo
{
IFoo SetBar(string s);
IFoo DoStuff();
IFoo SetColor(Color c);
}
In this way, any concrete class that implements the interface, gets the fluent method chaining capabilities. FWIW.. I wrote the above code in C# 1.1
You will find this technique littered throughout the jQuery API
A couple of things come to mind that are possible in .Net 3.5/C# 3.0:
If an object doesn't implement a fluent interface, you could use Extension Methods to chain your calls.
You might be able to use the object initialization to simulate fluent, but this only works at instantiation time and would only work for single argument methods (where the property is only a setter). This seems hackish to me, but the there it is.
Personally, I don't see anything wrong with using function chaining if you are implementing a builder object. If the builder object has chaining methods, it keeps the object you are creating clean. Just a thought.
This is how I've built my so called fluent interfaces or my only forary into it
Tokenizer<Bid> tkn = new Tokenizer<Bid>();
tkn.Add(Token.LambdaToken<Bid>("<YourFullName>", b => Util.CurrentUser.FullName))
.Add(Token.LambdaToken<Bid>("<WalkthroughDate>",
b => b.WalkThroughDate.ToShortDateString()))
.Add(Token.LambdaToken<Bid>("<ContactFullName>", b => b.Contact.FullName))
.Cache("Bid")
.SetPattern(#"<\w+>");
My example required .net 3.5 but that's only cause of my lambda's. As Brad pointed out you can do this in any version of .net. Although I think lambda's make for more interesting possibilities such as this.
======
Some other good examples are nHibernate's Criteria API, there is also a fluent nhibernate extension for configuring nhibernate but I've never used it
Dynamic keyword in C# 4.0 will make it possible to write dynamic style builders. Take a look at following article about JSON object construction.