I have install the Deploy Plugin on Hudson.
Is it possible to fill "Deploy war/ear to a container" field with two webapps. What is the convention ? Using ; or , or space?
Thanks.
According to the plugin documentation:
This plugin takes a war/ear file and deploys that to a running remote application server at the end of a build.
So it seems that it can't do more than one.
Related
I normally use JTest Parasoft as a plugin in Eclipse.
But now, I need to integrate JTest in Hudson, at a way that in the Post-build, JTest should run its tests over a Maven project.
So my questions are :
How to integrate JTest in Hudson? I found a plugin CppTest by Parasoft and not JTest...
How to specify the tests which should be run on the project? For example, configure JTest to run "Find unused code" which is included in "Static Analysis"...?
Thank you a lot.
Jtest has fully functional command line interface so generally integration should not be a problem.
As for your questions:
1) there is a Jtest plugin for Maven, so you will be able to trigger your post-build action easily. It's thoroughly described on http://build.parasoft.com .
2) you can specify the Test Configuration of your choice by using -Dparasoft.config option (i.e.: mvn parasoft:jtest -Dparasoft.config="user://Unused Code").
You can find all the parameters which can be used with parasoft:jtest goal described here: http://build.parasoft.com/docs/maven-parasoft-plugin/jtest-mojo.html .
We have integrated Jenkins with Jtest (Linux)
Downloaded the Jtest installers and installed in Jenkins server (in slaves too if you have slaves attached)
Env variables for same has been set (JTEST_HOME)
And now without any entries for Jtest in Pom or build.xml files, we
can directly call the jtestcli commands either in invoke shell
section or use Jtest goals with maven too.
We need to make sure that we have maven-parasoft-plugin 3.12 and Jtest dependencies available in maven repo (for maven projects) and we should have parasoft-ant-3.12.jar available which we need to place in ant lib folder (for ant projects).
I am trying to install M2release plugin in Hudson.
I cannot install plugin using Hudson plugin update page due to lack of proxy settings. So i downloaded hpi file and used upload plugin option to deploy it.
Now Hudson home[directory] is showing the plugin inside plugin directory but i can't see the plugin in list of installed plugins on Hudson UI also plugin is not available on job configuration page. I hvae already bounced hudson server twice.
What am i missing here? Any additional steps are needed to install plugin manually?
Your steps seem fine.Since M2release plugin has moved to Jenkins now, so make sure you downloaded the compatible version with Hudson.
I have a job in Hudson server A which builds an artifact and deploys it to Nexus. I have another job in a completely separate Hudson server B which needs to download the artifact and deploy it. This job is normally run manually, and the person running it needs to indicate which version of the artifact to deploy - they may not always want to deploy the latest version (e.g. to roll back to a previous known good version).
Currently, I achieve this by using a parameterized build, and require the user to pass in the artifact version number; the job then uses the Execute shell build step to run wget on a URL constructed using the parameter. This is error prone.
Ideally I'd like a plugin that lets the user browse the artifact versions in the Nexus repository and pick and choose the one to deploy, but I'm open to other suggestions. A plugin that also handles the download would be nice, but I can live without it as long as I can still get a string that I can use in shell commands.
I've looked through the available Hudson & Jenkins plugins around Maven style artifact repositories, but they all seem more concerned with pushing artifacts into repos rather than getting them back down.
I'm using Hudson's "Copy Artifact" in other jobs, to get artifacts from other Hudson jobs on the same server, but this doesn't work across different Hudson servers, which is why I've turned to Nexus (which we're already using anyway).
Does anyone have any suggestions?
I recommend using rundeck to execute your deployments.
There is a rundeck plugin for Nexus that enables rundeck to display a pull down menu of available versions in Nexus.
There is a rundeck plugin for Jenkins that can be used to invoke deployments using rundeck and kick-off post deployment jobs (like integration testing) inn Jenkins.
I have a few plugins in my Jenkins installation which I no longer need. I've already disabled the plugins (and my build still work), and I'd like to remove the plugins completely. What is the right process for completely removing a Jenkins (Hudson) plugin?
As mentioned by Jesse Glick in his answer, if you are using Jenkins 1.487 or higher, then there is a native way to uninstall plugins in the Jenkins UI. See JENKINS-3070 for details.
If you are using a version of Jenkins earlier than 1.487, then you can try manually uninstalling the plugin. As some people point out in the comments, this may not work on some platforms (in those cases, upgrade to at least 1.487 so that you can use the official uninstall feature).
To manually uninstall a plugin, stop Hudson/Jenkins, go to your HUDSON_HOME/plugins directory and remove both the .hpi file and the folder with the same name. So, if you were going to remove the CVS plugin, you would remove both the cvs.hpi file and the cvs directory.
After that, restart Hudson/Jenkins and the plugin won't be there anymore.
Jenkins 1.487 adds a UI for uninstalling plugins: JENKINS-3070
Deleting the <plugin>.hpi file and corresponding <plugin>-plugin directory will effectively remove the plugin.
However, if you have configured parameters that belong to the plugin within your jobs your Hudson or tomcat logs may contain *CannotResolveClassException: hudson.plugins ... * exceptions because it attempts to load the plugin. This can result in build failures even if build is successful.
To fix that,
go to the job configuration and save it again. This should get rid of the plugin reference
if not, go into the hudson home jobs directory and open the config.xml found under the folder named after the job and remove the reference to the plugin
restart hudson
Hudson Plugins explains that some core plugins ("Tier 1" plugins, as they are called) are shipped with Hudson itself, and I assume cannot be deleted therefore.
You can disable it using the Jenkins ยป Plugin Manager. Go to Installed tab and untick the plugins you want to uninstall and restart Jenkins. Though it does not unintall, at least keeps it away from appearing from configuration pages..
I am new in Hudson.
I would like to execute a 'sourcecodeanalyzer' command in Hudson as Post-build Actions to generate an html report. Please let me know is this at all possible, if yes let me know the Hudson configuration steps to execute the command.
Your earliest response in this regard will be extremely helpful.
Thanks in advance.
Yes, it is almost certainly possible.
You will need to configure the Hudson project to have either a post-build action or a build step that runs your source code analyzer.
You've not stated in your question precisely which analyzer - it may be that Hudson already has a plug-in installed for it, in which case it may be listed on the Config page for the project at the bottom under Post-build Actions.
If not, next check to see if there's a plug-in available for the analyzer that hasn't been installed. From the main Hudson page select Manage Hudson, then Manage Plugins, and choose the Available tab. If there is a plug-in available it's definitely a good idea to use it as they are generally very well integrated with Hudson itself.
As a last resort you'll have to configure a build step to run the analyzer. Configure the project, then choose "Add build step". The drop-down that appears depends on your environment (Windows or Linux) but should include the ability to run a shell command or batch file. You can configure your analyzer there.
(If you're building Windows Visual Studio applications, a more flexible way that I've used is to use the MSBuild plug-in for builds, and have an MSBuild script that builds the application and then runs analysis tools. This can automate pretty much everything: mine builds the application, builds an acceptance test database, runs the acceptance tests and copies the result HTML to a page linked from the project.)
You could create a new job with a "Execute Shell" build step. Type in the command you wish to run in the text box. Then all you have to do is trigger this job by selecting:
"Build after other projects are built"
And select the trigger job from the list.
Hope this helps!
As a follow up to Jeremy's post. If you don't see the ability to add post build steps, you might work with maven jobs. In that case you need the Hudson M2 Extra Steps Plugin. This will give you pre and post build steps.
I use the 'Post build task' plugin to delete some resources after a build. You could call any shell script or command lines. If you want you could make the call depends on some logging output.
there is one best way to solve this:
Upgrade to Fortify SCA 2.6.x (as of writing, latest version is 2.6.5).
Download the Fortify Maven Plugin version 2.6 from https://customerportal.fortify.com and install it into your Hudson server's Maven repository.
Update your project's pom to carry out the Fortify scan. There is an example provided with the Maven plugin.
Currently , I am experiment with sonar plug in. It looks great check the details here
http://sonar.codehaus.org/a-new-hudson-plugin-for-a-closer-integration-with-sonar/
http://wiki.hudson-ci.org/display/HUDSON/Sonar+plugin