I'm fairly new to HTML5 and I don't understand the purpose of different elements very well. I'm trying to use section as wrapper and I'm having a problem of the section not spanning all the way across.
Can you please go to the following web address:
[removed due to solved question]
I want the section to span all the way across the page to cover full width. But when I give it a 100% with, it simply disregards the width taken up by nav and floats down. Is there a way to make the section span across the remaining space in the screen?
Thanks very much
You appear to have floated it left. Getting rid of the float: left rule in section#Maincontainer should fix it.
If i understood correctly what you want to span across is the menu section .. now percentage width is always relative to its container .. so if the container`s width was 900px then the elements inside if had a 100% width will have 900px
i have used this css code and it worked fine
section#maincontainer {
width: " put the value here";
}
now usually if you dont specify a width, the elements takes all the space available, but in your case you have specified a float which forces the element in a specific area, removing float will work fine
Related
When I switch off the blog part and sidebars in the terrifico theme in Wordpress I don't seem to be able to place a full width slider anywhere.
The theme looks like this in the form that I'm talking about: http://vpthemes.com/preview/Terrifico/page-full-width/
As you can see all the text is 'bounded' by a box (the black line). Is there any way in which I can make the metaslider go OUTSIDE of this box (i.e. to span the FULL width of the page)? I don't necessarily want to get rid of the box all toghether, the text can stay within it.
I have seen on the Metaslider website that some solutions for certain themes are given (here - but I am not sure how to adapt this to the theme that I'm using.
Thanks in advance!
Disclaimer
Before I suggest a solution, I'd like to point out that what you're asking is to break the Box flow model. I wouldn't recommend that because you're likely to run into inconsistent results across browsers.
That said, what you're trying to accomplish is possible. You could use javascript to do this and it may in fact be easier in some respects but here's a CSS solution.
1. Break out of the box model
float: left;
width: 200%;
margin-left: -50%;
text-align: center;
The float CSS property specifies that an element should be taken from the normal flow and placed along the left or right side of its container, where text and inline elements will wrap around it.
The width of the container is still relative to its parent so if you use % units to scale it up you would need to compensate for the responsiveness of the parent. Here, I'm just overcompensating.
To ensure that our element remains centered, we use a negative margin that is half of the overflow. That is, we want our box to be 100% wide, we have 100% overflow to ensure that so half the overflow is 50% (comment below if that doesn't make sense).
We use text-align to put the element we add in step 3 in the center of the viewport.
2. Allow Overflows
This is where you may well break themes. The parent elements will hide elements that float outside of them if they have the overflow: hidden property (note overflow can also be used to show scrollbars).
You will need to ensure that the parent elements have:
#post-body, .content-posts-wrap {
overflow: visible;
}
As far as I can see that affects #post-body and .content-posts-wrap
3. Add an element that will be the right size
Now we have an oversized container for our slider but we need it to be the width of the page. Inside the div or whatever it is you want to put your slider into you will need to nest another element that will be the correct width. That element will need the following css:
display: inline-block;
width: 100vw;
text-align: left;
You need display because we are back to the box model now and we want our block to obey the width rule we give to it.
We set our width using vw (viewport width) units to make this a bit easier (but they may not be supported on your target browser). There may be some ingenius way to do this without vw units but I would probably just use javascript if it's not an option for you.
Finally, since we set our text-align above, we need to reset it here.
4. Add a Clearing Div
Because you've broken out of the flow, elements aren't too sure what to do. You probably want to add another element after your parent slider that
specifies whether an element can be next to floating elements that precede it or must be moved down (cleared) below them. source
It can be as simple as a <div> element with:
clear: both
write your code something like this...
html like that...
<div id="parent_for_slider">
<div id="slider">
//place your slider code
</div>
</div>
Css for that
#parent_for_slider{
position:relative;
}
#slider{
position:absolute;
width:100% !important;
height:auto;
}
i am recommending to use ResponsiveSlides.js for full width slider with responsiveness
In its simplest form, the problem is as follows. I have two divs (Ldiv and Rdiv) filling up my screen. Widths are 60% and 40% respectively, and heights vary according to the amount of content. Ldiv floats left and Rdiv floats right. The problem is that, as I narrow the window and push Rdiv against Ldiv, I seem to lose the right margin of Rdiv unless I make its width 35-39% instead of 40%. I have tried wrapping both inside an enclosing div container but this hasn't worked any better.
Can this be fixed by making one of the divs (say, Ldiv) a fixed width (in which case the layout is not entirely liquid, but that wouldn't matter too much)? I've read a number of posts here which say this is the way to go, but I can't see why it should. Many others say that with only 2 divs they should both float, but is there a non-floating alternative?
Thanks
Its not possible to give a real answer without seeing your code, BUT i guess to still have margins and paddings in your divs and/or your body element. So, in consequence the 40/60% dont add up to 100%. You can "remove" this with
body, #Ldiv, #Rdiv {
padding:0;
margin:0;
}
I have this and it got an HTML img#logo-image, on some occasions it will not be displayed, display:none.
The problem is that the entire div#menu-title should fit the width of the page.
I tried putting width:100%, but when the img#logo-imag" is displayed it breaks the line being below the img#logo-image.
The width:100% does not work with elements float:left
Just unfloat the menu-title div and remove the width.. it will automatically be 100% of the header then.. and if the image is present it will adjust the ul#menu list to make room for it, which is a natural behaviour
if you want the menu-list to really only take the available width (say for a background color or something then you can add overflow: hidden; to ul#menu - though I don't see a need for that in your example code
here's a simplified version of your Fiddle - hover on the header to make the image disappear and see the ul#menu adjust to suit
Example Fiddle
You have both logo-image and menu-title floating left. Since they arent really in separate divs, they are all part of the same div, they appear next to each other. On top of that, you set the menu-title to be 760, which isn't the width of the page. At least that what it looks like you did. Do not use width 100% because resizing the page will shrink that menu title.
You really just have to play around with the divs, but i would say that separating those two divs would make you be able to stack them on top or below each other.
And in using Chrome's inspect element feature, I don't see a display:none for the image's css. I don't know why that would do that.
I'm really not sure of what you are trying to accomplish since making the div#menu-title width: 100% doesn't leave any room for anything else on the same row.
Why not let them both be inline and let the widths be whatever they need to be?
Anyway, I have a guess at what you want. You want those two elements to behave as being in a table, inside a table row, and each in a table-cell so that the image takes a maximum width, and the div#menu-title taking all of the rest of the place. In that case put them in a table, or use display: table-cell for the image and the div and fiddle around with that.
I have a bunch of float: left elements and some are SLIGHTLY bigger than others. I want the newline to break and have the images float all the way to the left instead of getting stuck on a bigger element.
Here is the page I'm talking about : link
If they are all the same size if works beautifully : link
Thanks! (I'd rather not get into javascript or server side scripting if I don't have to)
Well, if you really need to use float declarations, you have two options:
Use clear: left on the leftmost items - the con is that you'll have a fixed number of columns
Make the items equal in height - either by script or by hard-coding the height in the CSS
Both of these are limiting, because they work around how floats work. However, you may consider using display: inline-block instead of float, which will achieve the similar layout. You can then adjust their alignment using vertical-align.
I fixed it by removing float:left, and adding display:inline-block instead. Haven't used it for images, but should work fine, there, too.
Use display:inline-block
You may also find vertical-align: top or vertical-align:middle useful.
This is what I did. Seems to work in forcing a new line, but I'm not an html/css guru by any measure.
<p> </p>
You can wrap them in a div and give the div a set width (the width of the widest image + margin maybe?) and then float the divs. Then, set the images to the center of their containing divs. Your margins between images won't be consistent for the differently sized images but it'll lay out much more nicely on the page.
This is an old post and the links are no longer valid but because it came up early in a search I was doing I thought I should comment to help others understand the problem better.
By using float you are asking the browser to arrange your controls automatically. It responds by wrapping when the controls don't fit the width for their specified float arrangement. float:left, float:right or clear:left,clear:right,clear:both.
So if you want to force a bunch of float:left items to float uniformly into one left column then you need to make the browser decide to wrap/unwrap them at the same width. Because you don't want to do any scripting you can wrap all of the controls you want to float together in a single div. You would want to add a new wrapping div with a class like:
.LeftImages{
float:left;
}
html
<div class="LeftImages">
<img...>
<img...>
</div>
This div will automatically adjust to the width of the largest image and all the images will be floated left with the div all the time (no wrapping).
If you still want them to wrap you can give the div a width like width:30% and each of the images the float:left; style. Rather than adjust to the largest image it will vary in size and allow the contained images to wrap.
Add to .icons div {width:160px; height:130px;} will work out very nicely
Hope it will help
I just designed a portfolio website. I have a whole array of images that I want to keep in one line (with horizontal scroll). This only happens when I have set a fixed width for the surrounding div (in this case with class '.post-images'), wide enough to contain all images. This could be just fine if the amount of images and their widths wasn't dynamic. Unfortunately this isn't the case here. I want this div to be wrapping around all images and not causing them to float. I have tried to set the div's where I put each image in ('.post-image') to 'white-space: nowrap' to no avail.
See an example here: Link
How can I fix this problem? I hope someone is willing to give me a hand here ;)
Thanks,
Jeroen
Replace the css for .post_images and .post_image with:
.post_images { white-space:nowrap; }
.post_image { display:inline; }
Effectively, this makes the wrapping <div class="post_image"> elements redundant (that's the display:inline); you may as well remove them.
In general, most elements size their width according to that of their container; if you wish an element to size according to content, you'll need a <table>, display: table or single line.
Edit: both white-space:nowrap and display:inline have been supported on all major browsers for years (in IE, all the way back to IE 5.5).