I defined (through PHPMYADMIN) a field with the float data type.
When I try to insert a number as 78.556677099932222377 it will translate it to 79.
How do I make it to save the correct number, at least 7 places after the decimal dot?
Open phpMyAdmin with structure option and define the float as:
FLOAT(23,19)
clear in this picture:
How do you define the float in phpMyAdmin
FLOAT(23,19)
when u declare the field you could use that above.
Better to go with Cygnusx1 and change to decimal
see MySQL numeric types
and also Problems with Float
DECIMAL is what you looking for.
ref:
SQL Decimal is used to specify the values in decimal datatype. The Decimal datatype can be of two types : Decimal (p) refers to floating point and Decimal fixed point (p,s). The DECIMAL data type can store decimal floating-point numbers up to a maximum of 32 significant digits and Decimal fixed point can store upto 16 significant digits.
Related
As laravel migration I put a field as double() without assign the number of digits of decimals and totals. In the mysql db are stored as double without, again, numbers of digits.
So I try to search in laravel and mysql docs but with no hope, the question is What is the default rappresentation of a double field without the numbers of digits?
Ok the are used 8 bytes, but how?
thanks
Do not use FLOAT(m,n) or DOUBLE(m,n); use only FLOAT or DOUBLE. The (m,n) causes double-rounding and/or truncation. The intent of FLOAT and DOUBLE is represent "scientific" (not "money") values that have a wide range of precision and range.
FLOAT holds about 7 significant digits; DOUBLE, 16. The decimal point can be virtually anywhere.
If you want "fixed point" numbers, use DECIMAL(m,n). For example DECIMAL(8,2) can represent up to a million dollars or Euros, down to the cent.
Hello in my database I have a column with numbers such as 6.251543423 I want to make them like 6.25 without rounding them.
I've tried update examresults set point = substring(point,0,5) but it returned all values as zero
If you don't want to round you must truncate:
TRUNCATE(6.251543423,2)
When you CAST as DECIMAL(n,2) or FLOAT(n,2) the result will be rounded.
Convert the floating point values to DECIMAL datatype, with appropriate number of digits after the decimal point. In this example, two digits after the decimal point.
SELECT CONVERT(float_col,DECIMAL(65,2)) AS dec_col
FROM ...
The floating point types FLOAT and DOUBLE are approximate decimal values. They are stored in standard IEEE floating point representation.
If you convert to decimal, and then store that back in a floating point column, it will be converted back into floating point representation.
You would need to do the conversion to DECIMAL when you pull the value back out again.
If you want to store an exact decimal representation, you would need to store the value in a column defined as DECIMAL (or NUMERIC) datatype, not a FLOAT or DOUBLE.
Also...
MySQL permits a nonstandard syntax: FLOAT(M,D) or REAL(M,D) or DOUBLE PRECISION(M,D). Here, “(M,D)” means than values can be stored with up to M digits in total, of which D digits may be after the decimal point. For example,
(that's excerpted from MySQL Reference Manual: https://dev.mysql.com/doc/refman/5.5/en/floating-point-types.html )
(NOTE: I've never exercised/tested that behavior of DOUBLE(18,2). When we need exact decimals, we use DECIMAL. And when we need floating point, we use plain old DOUBLE.)
I am creating for fun, but I still want to approach it seriously, a site which hosts various tests. With these tests I hope to collect statistical data.
Some of the data will include the percentage of the completeness of the tests as they are timed. I can easily compute the percentage of the tests but I would like true data to be returned as I store the various different values concerning the tests on completion.
Most of the values are, in PHP floats, so my question is, if I want true statistical data should I store them in MYSQL as FLOAT, DOUBLE or DECIMAL.
I would like to utilize MYSQL'S functions such as AVG() and LOG10() as well as TRUNCATE(). For MYSQL to return true data based off of my values that I insert, what should I use as the database column choice.
I ask because some numbers may or may not be floats such as, 10, 10.89, 99.09, or simply 0.
But I would like true and valid statistical data to be returned.
Can I rely on floating point math for this?
EDIT
I know this is a generic question, and I apologise extensively, but for non mathematicians like myself, also I am not a MYSQL expert, I would like an opinion of an expert in this field.
I have done my research but I still feel I have a clouded judgement on the matter. Again I apologise if my question is off topic or not suitable for this site.
This link does a good job of explaining what you are looking for. Here is what is says:
All these three Types, can be specified by the following Parameters (size, d). Where size is the total size of the String, and d represents precision. E.g To store a Number like 1234.567, you will set the Datatype to DOUBLE(7, 3) where 7 is the total number of digits and 3 is the number of digits to follow the decimal point.
FLOAT and DOUBLE, both represent floating point numbers. A FLOAT is for single-precision, while a DOUBLE is for double-precision numbers. A precision from 0 to 23 results in a 4-byte single-precision FLOAT column. A precision from 24 to 53 results in an 8-byte double-precision DOUBLE column. FLOAT is accurate to approximately 7 decimal places, and DOUBLE upto 14.
Decimal’s declaration and functioning is similar to Double. But there is one big difference between floating point values and decimal (numeric) values. We use DECIMAL data type to store exact numeric values, where we do not want precision but exact and accurate values. A Decimal type can store a Maximum of 65 Digits, with 30 digits after decimal point.
So, for the most accurate and precise value, Decimal would be the best option.
Unless you are storing decimal data (i.e. currency), you should use a standard floating point type (FLOAT or DOUBLE). DECIMAL is a fixed point type, so can overflow when computing things like SUM, and will be ridiculously inaccurate for LOG10.
There is nothing "less precise" about binary floating point types, in fact, they will be much more accurate (and faster) for your needs. Go with DOUBLE.
Decimal : Fixed-Point Types (Exact Value). Use it when you care about exact precision like money.
Example: salary DECIMAL(8,2), 8 is the total number of digits, 2 is the number of decimal places. salary will be in the range of -999999.99 to 999999.99
Float, Double : Floating-Point Types (Approximate Value). Float uses 4 bytes to represent value, Double uses 8 bytes to represent value.
Example: percentage FLOAT(5,2), same as the type decimal, 5 is total digits and 2 is the decimal places. percentage will store values between -999.99 to 999.99.
Note that they are approximate value, in this case:
Value like 1 / 3.0 = 0.3333333... will be stored as 0.33 (2 decimal place)
Value like 33.009 will be stored as 33.01 (rounding to 2 decimal place)
Put it simply, Float and double are not as precise as decimal. decimal is recommended for money related number input.(currency and salary).
Another point need to point out is: Do NOT compare float number using "=","<>", because float numbers are not precise.
Linger: The website you mention and quote has IMO some imprecise info that made me confused. In the docs I read that when you declare a float or a double, the decimal point is in fact NOT included in the number. So it is not the number of chars in a string but all digits used.
Compare the docs:
"DOUBLE PRECISION(M,D).. Here, “(M,D)” means than values can be stored with up to M digits in total, of which D digits may be after the decimal point. For example, a column defined as FLOAT(7,4) will look like -999.9999 when displayed"
http://dev.mysql.com/doc/refman/5.1/en/floating-point-types.html
Also the nomenclature in misleading - acc to docs: M is 'precision' and D is 'scale', whereas the website takes 'scale' for 'precision'.
Thought it would be useful in case sb like me was trying to get a picture.
Correct me if I'm wrong, hope I haven't read some outdated docs:)
Float and Double are Floating point data types, which means that the numbers they store can be precise up to a certain number of digits only.
For example for a table with a column of float type if you store 7.6543219 it will be stored as 7.65432.
Similarly the Double data type approximates values but it has more precision than Float.
When creating a table with a column of Decimal data type, you specify the total number of digits and number of digits after decimal to store, and if the number you store is within the range you specified it will be stored exactly.
When you want to store exact values, Decimal is the way to go, it is what is known as a fixed data type.
Simply use FLOAT. And do not tack on '(m,n)'. Do display numbers to a suitable precision with formatting options. Do not expect to get correct answers with "="; for example, float_col = 0.12 will always return FALSE.
For display purposes, use formatting to round the results as needed.
Percentages, averages, etc are all rounded (at least in some cases). That any choice you make will sometimes have issues.
Use DECIMAL(m,n) for currency; use ...INT for whole numbers; use DOUBLE for scientific stuff that needs more than 7 digits of precision; use FLOAT` for everything else.
Transcendentals (such as the LOG10 that you mentioned) will do their work in DOUBLE; they will essentially never be exact. It is OK to feed it a FLOAT arg and store the result in FLOAT.
This Answer applies not just to MySQL, but to essentially any database or programming language. (The details may vary.)
PS: (m,n) has been removed from FLOAT and DOUBLE. It only added extra rounding and other things that were essentially no benefit.
In my database some fields (amount, balance) are assigned as floating value, but now i have a problem with that .if the amount is 1.56 it will take 1.6
then i alter the table using Round(amount,2)
still it shows the same problem.
if anybody know please help me.
The float fields must be declared as float(some_integer, 1) to show the behaviour you described. The first integer in such a declaration tells MySQL how much digits should be visible alltogether, the ones left to the decimal point + the ones right to it. To have 3 digits to the left and 2 to the right of the decimal point you would declare it as float(5,2).
Like Doan Cuong already mentioned it would be better if you would choose decimal data type.
See the different behaviour of it live here.
To quote the manual:
The DECIMAL and NUMERIC types store exact numeric data values. These types are used when it is important to preserve exact precision, for example with monetary data.
The FLOAT and DOUBLE types represent approximate numeric data values.
For additional info about the data types read more here.
Datatype of field in the DB is FLOAT and the value is 18.7. I'd like to store and display this on page as 18.70. Whenever I enter the extra 0 it still only stores it as 18.7
How can I store the extra 0 ? I can change the data type of the field.
In a FLOAT column, what MySQL stores for 18.7, is actually:
01000001 10010101 10011001 10011010
which, being retrieved from the DB and converted back into your display format, is 18.7.
In reality, the stored value is a binary fraction represented by the decimal number 18.70000076293945 which you can see by issuing this query:
CREATE TABLE t_f (value FLOAT);
INSERT
INTO t_f
VALUES (18.7);
SELECT CAST(value AS DECIMAL(30, 16))
FROM t_f;
IEEE-754 representation of number stores them as binary fractions, so a value like 0.1 can only be represented with continued fraction and hence be not exact.
DECIMAL, on the other hand, stores decimal digits, packing 9 digits into 4 bytes.
Floating point types do not store the number of insignificant zeros on the left side of a number before decimal digit or on the right side of the number after the decimal digit. You'll need to use a string-based type (or store the precision in a separate field) if you want to store the exact numeric string entered by the user and be able to distinguish 12.7 from 12.70. You can, however, round things that you display by two digits in your application.
if two decimal points needed use:
decimal(n,2); where n>=2
the decimal data type will persist the decimal points formatting and gives more accurate results than float and double data types.
Are you attempting to store a currency as a float? If so, please use a decimal with more decimal digits than 2.
You really want fixed-point arithmetic on currencies.
This is just very broad rule of thumb and my own observation, but in regular business logic as serialized in a database, you almost never want floating point. I know there are lots of exceptions, but I'm suspicious whenever I see a float typed column in a table because of this. I'd be interested in what others have found.