How should stereo (2 channel) audio data be represented for FFT? Do you
A. Take the average of the two channels and assign it to the real component of a number and leave the imaginary component 0.
B. Assign one channel to the real component and the other channel to the imag component.
Is there a reason to do one or the other? I searched the web but could not find any definite answers on this.
I'm doing some simple spectrum analysis and, not knowing any better, used option A). This gave me an unexpected result, whereas option B) went as expected. Here are some more details:
I have a WAV file of a piano "middle-C". By definition, middle-C is 260Hz, so I would expect the peak frequency to be at 260Hz and smaller peaks at harmonics. I confirmed this by viewing the spectrum via an audio editing software (Sound Forge). But when I took the FFT myself, with option A), the peak was at 520Hz. With option B), the peak was at 260Hz.
Am I missing something? The explanation that I came up with so far is that representing stereo data using a real and imag component implies that the two channels are independent, which, I suppose they're not, and hence the mess-up.
I don't think you're taking the average correctly. :-)
C. Process each channel separately, assigning the amplitude to the real component and leaving the imaginary component as 0.
Option B does not make sense. Option A, which amounts to convert the signal to mono, is OK (if you are interested in a global spectrum).
Your problem (double freq) is surely related to some misunderstanding in the use of your FFT routines.
Once you take the FFT you need to get the Magnitude of the complex frequency spectrum. To get the magnitude you take the absolute of the complex spectrum |X(w)|. If you want to look at the power spectrum you square the magnitude spectrum, |X(w)|^2.
In terms of your frequency shift I think it has to do with you setting the imaginary parts to zero.
If you imagine the complex Frequency spectrum as a series of complex vectors or position vectors in a cartesian space. If you took one discrete frequency bin X(w), there would be one real component representing its direction in the real axis (x -direction), and one imaginary component in the in the imaginary axis (y - direction). There are four important values about this discrete frequency, 1. real value, 2. imaginary value, 3. Magnitude and, 4. phase. If you just take the real value and set imaginary to 0, you are setting Magnitude = real and phase = 0deg or 90deg. You have hence forth modified the resulting spectrum, and applied a bias to every frequency bin. Take a look at the wiki on Magnitude of a vector, also called the Euclidean norm of a vector to brush up on your understanding. Leonbloy was correct, but I hope this was more informative.
Think of the FFT as a way to get information from a single signal. What you are asking is what is the best way to display data from two signals. My answer would be to treat each independently, and display an FFT for each.
If you want a really fast streaming FFT you can read about an algorithm I wrote here: www.depthcharged.us/?p=176
Related
All examples that I can find on the Internet just visualize the result array of the function computeSpectrum, but I am tasked with something else.
I generate a music note and I need by analyzing the result array to be able to say what note is playing. I figured out that I need to set the second parameter of the function call 'FFTMode' to true and then it returns sound frequencies. I thought that really it should return only one non-zero value which I could use to determine what note I generated using Math.sin function, but it is not the case.
Can somebody suggest a way how I can accomplish the task? Using the soundMixer.computeSpectrum is a requirement because I am going to analyze more complex sounds later.
FFT will transform your signal window into set of Nyquist sine waves so unless 440Hz is one of them you will obtain more than just one nonzero value! For a single sine wave you would obtain 2 frequencies due to aliasing. Here an example:
As you can see for exact Nyquist frequency the FFT response is single peak but for nearby frequencies there are more peaks.
Due to shape of the signal you can obtain continuous spectrum with peaks instead of discrete values.
Frequency of i-th sample is f(i)=i*samplerate/N where i={0,1,2,3,4,...(N/2)-1} is sample index (first one is DC offset so not frequency for 0) and N is the count of samples passed to FFT.
So in case you want to detect some harmonics (multiples of single fundamental frequency) then set the samplerate and N so samplerate/N is that fundamental frequency or divider of it. That way you would obtain just one peak for harmonics sinwaves. Easing up the computations.
I want to fit a curve to data obtained from an FFT. While working on this, I remembered that an FFT gives binned data, and therefore I wondered if I should treat this differently with curve-fitting.
If the bins are narrow compared to the structure, I think it should not be necessary to treat the data differently, but for me that is not the case.
I expect the right way to fit binned data is by minimizing not the difference between values of the bin and fit, but between bin area and the area beneath the fitted curve, for each bin, such that the energy in each bin matches the energy in the range of the bin as signified by the curve.
So my question is: am I thinking correctly about this? If not, how should I go about it?
Also, when looking around for information about this subject, I encountered the "Maximum log likelihood" for example, but did not find enough information about it to understand if and how it applied to my situation.
PS: I have no clue if this is the right site for this question, please let me know if there is a better place.
For an unwindowed FFT, the correct interpolation between bins is by using a Sinc (sin(x)/x) or periodic Sinc (Dirichlet) interpolation kernel. For an FFT of samples of a band-limited signal, thus will reconstruct the continuous spectrum.
A very simple and effective way of interpolating the spectrum (from an FFT) is to use zero-padding. It works both with and without windowing prior to the FFT.
Take your input vector of length N and extend it to length M*N, where M is an integer
Set all values beyond the original N values to zeros
Perform an FFT of length (N*M)
Calculate the magnitude of the ouput bins
What you get is the interpolated spectrum.
Best regards,
Jens
This can be done by using maximum log likelihood estimation. This is a method that finds the set of parameters that is most likely to have yielded the measured data - the technique originates in statistics.
I have finally found an understandable source for how to apply this to binned data. Sadly I cannot enter formulas here, so I refer to that source for a full explanation: slide 4 of this slide show.
EDIT:
For noisier signals this method did not seem to work very well. A method that was a bit more robust is a least squares fit, where the difference between the area is minimized, as suggested in the question.
I have not found any literature to defend this method, but it is similar to what happens in the maximum log likelihood estimation, and yields very similar results for noiseless test cases.
The documentation for both of these methods are both very generic wherever I look. I would like to know what exactly I'm looking at with the returned arrays I'm getting from each method.
For getByteTimeDomainData, what time period is covered with each pass? I believe most oscopes cover a 32 millisecond span for each pass. Is that what is covered here as well? For the actual element values themselves, the range seems to be 0 - 255. Is this equivalent to -1 - +1 volts?
For getByteFrequencyData the frequencies covered is based on the sampling rate, so each index is an actual frequency, but what about the actual element values themselves? Is there a dB range that is equivalent to the values returned in the returned array?
getByteTimeDomainData (and the newer getFloatTimeDomainData) return an array of the size you requested - its frequencyBinCount, which is calculated as half of the requested fftSize. That array is, of course, at the current sampleRate exposed on the AudioContext, so if it's the default 2048 fftSize, frequencyBinCount will be 1024, and if your device is running at 44.1kHz, that will equate to around 23ms of data.
The byte values do range between 0-255, and yes, that maps to -1 to +1, so 128 is zero. (It's not volts, but full-range unitless values.)
If you use getFloatFrequencyData, the values returned are in dB; if you use the Byte version, the values are mapped based on minDecibels/maxDecibels (see the minDecibels/maxDecibels description).
Mozilla 's documentation describes the difference between getFloatTimeDomainData and getFloatFrequencyData, which I summarize below. Mozilla docs reference the Web Audio
experiment ; the voice-change-o-matic. The voice-change-o-matic illustrates the conceptual difference to me (it only works in my Firefox browser; it does not work in my Chrome browser).
TimeDomain/getFloatTimeDomainData
TimeDomain functions are over some span of time.
We often visualize TimeDomain data using oscilloscopes.
In other words:
we visualize TimeDomain data with a line chart,
where the x-axis (aka the "original domain") is time
and the y axis is a measure of a signal (aka the "amplitude").
Change the voice-change-o-matic "visualizer setting" to Sinewave to
see getFloatTimeDomainData(...)
Frequency/getFloatFrequencyData
Frequency functions (GetByteFrequencyData) are at a point in time; i.e. right now; "the current frequency data"
We sometimes see these in mp3 players/ "winamp bargraph style" music players (aka "equalizer" visualizations).
In other words:
we visualize Frequency data with a bar graph
where the x-axis (aka "domain") are frequencies or frequency bands
and the y-axis is the strength of each frequency band
Change the voice-change-o-matic "visualizer setting" to Frequency bars to see getFloatFrequencyData(...)
Fourier Transform (aka Fast Fourier Transform/FFT)
Another way to think about "time domain vs frequency" is shown the diagram below, from Fast Fourier Transform wikipedia
getFloatTimeDomainData gives you the chart on on the top (x-axis is Time)
getFloatFrequencyData gives you the chart on the bottom (x-axis is Frequency)
a Fast Fourier Transform (FFT) converts the Time Domain data into Frequency data, in other words, FFT converts the first chart to the second chart.
cwilso has it backwards.
the time data array is the longer one (fftSize), and the frequency data array is the shorter one (half that, frequencyBinCount).
fftSize of 2048 at the usual sample rate of 44.1kHz means each sample has 1/44100 duration, you have 2048 samples at hand, and thus are covering a duration of 2048/44100 seconds, which 46 milliseconds, not 23 milliseconds. The frequencyBinCount is indeed 1024, but that refers to the frequency domain (as the name suggests), not the time domain, and it the computation 1024/44100, in this context, is about as meaningful as adding your birth date to the fftSize.
A little math illustrating what's happening: Fourier transform is a 'vector space isomorphism', that is, a mapping going bijectively (i.e., reversible) between 2 vector spaces of the same dimension; the 'time domain' and the 'frequency domain.' The vector space dimension we have here (in both cases) is fftSize.
So where does the 'half' come from? The frequency domain coefficients 'count double'. Either because they 'actually are' complex numbers, or because you have the 'sin' and the 'cos' flavor. Or, because you have a 'magnitude' and a 'phase', which you'll understand if you know how complex numbers work. (Those are 3 ways to say the same in a different jargon, so to speak.)
I don't know why the API only gives us half of the relevant numbers when it comes to frequency - I can only guess. And my guess is that those are the 'magnitude' numbers, and the 'phase' numbers are thrown out. The reason that this is my guess is that in applications, magnitude is far more important than phase. Still, I'm quite surprised that the API throws out information, and I'd be glad if some expert who actually knows (and isn't guessing) can confirm that it's indeed the magnitude. Or - even better (I love to learn) - correct me.
I am using the accelerate framework FFT functions to produce a spectrogram of a sound sample. This part works great. However, I want to (effectively) manipulate the spectrum directly (ie manipulate the real numbers), and then call the inverse again, how would I go about doing that? It looks like the INVERSE call expects an array of IMAGINARY numbers, but how can I produce that from my manipulated real numbers? I have tried making the realp array my reals, and the imagp part zero, but that doesn't seem to work.
The reason I ask this is because I wish to run an FFT on a voice audio sample, and then run the FFT again and then lifter the low part of the cepstrum (thus hopefully separating the vocal tract components from the pitch) and then run an inverse FFT again to produce a spectrogram showing the vocal tract (formant) information more clearly (ie, without the pitch information). However, I seem to be running into problems on the inverse FFT, into which I am passing in my real values (cepstrum) in the realp array and the imagp is zero. I think I am doing something wrong here and the results are unexpected.
You need to process the complex forward FFT results, rather than the real magnitudes, or else the shape of the IFFT result spectrum will be distorted. Don't consider them imaginary numbers, consider them to be part of a 2D vector containing the required angular phase information.
If your cepstrum lifter/filter alters only the real magnitudes, then you can try using the amount of change of the real magnitudes as scaling factors to alter your forward complex FFT result before doing a complex IFFT.
I have a series of data and need to detect peak values in the series within a certain number of readings (window size) and excluding a certain level of background "noise." I also need to capture the starting and stopping points of the appreciable curves (ie, when it starts ticking up and then when it stops ticking down).
The data are high precision floats.
Here's a quick sketch that captures the most common scenarios that I'm up against visually:
One method I attempted was to pass a window of size X along the curve going backwards to detect the peaks. It started off working well, but I missed a lot of conditions initially not anticipated. Another method I started to work out was a growing window that would discover the longer duration curves. Yet another approach used a more calculus based approach that watches for some velocity / gradient aspects. None seemed to hit the sweet spot, probably due to my lack of experience in statistical analysis.
Perhaps I need to use some kind of a statistical analysis package to cover my bases vs writing my own algorithm? Or would there be an efficient method for tackling this directly with SQL with some kind of local max techniques? I'm simply not sure how to approach this efficiently. Each method I try it seems that I keep missing various thresholds, detecting too many peak values or not capturing entire events (reporting a peak datapoint too early in the reading process).
Ultimately this is implemented in Ruby and so if you could advise as to the most efficient and correct way to approach this problem with Ruby that would be appreciated, however I'm open to a language agnostic algorithmic approach as well. Or is there a certain library that would address the various issues I'm up against in this scenario of detecting the maximum peaks?
my idea is simple, after get your windows of interest you will need find all the peaks in this window, you can just compare the last value with the next , after this you will have where the peaks occur and you can decide where are the best peak.
I wrote one simple source in matlab to show my idea!
My example are in wave from audio file :-)
waveFile='Chick_eco.wav';
[y, fs, nbits]=wavread(waveFile);
subplot(2,2,1); plot(y); legend('Original signal');
startIndex=15000;
WindowSize=100;
endIndex=startIndex+WindowSize-1;
frame = y(startIndex:endIndex);
nframe=length(frame)
%find the peaks
peaks = zeros(nframe,1);
k=3;
while(k <= nframe - 1)
y1 = frame(k - 1);
y2 = frame(k);
y3 = frame(k + 1);
if (y2 > 0)
if (y2 > y1 && y2 >= y3)
peaks(k)=frame(k);
end
end
k=k+1;
end
peaks2=peaks;
peaks2(peaks2<=0)=nan;
subplot(2,2,2); plot(frame); legend('Get Window Length = 100');
subplot(2,2,3); plot(peaks); legend('Where are the PEAKS');
subplot(2,2,4); plot(frame); legend('Peaks in the Window');
hold on; plot(peaks2, '*');
for j = 1 : nframe
if (peaks(j) > 0)
fprintf('Local=%i\n', j);
fprintf('Value=%i\n', peaks(j));
end
end
%Where the Local Maxima occur
[maxivalue, maxi]=max(peaks)
you can see all the peaks and where it occurs
Local=37
Value=3.266296e-001
Local=51
Value=4.333496e-002
Local=65
Value=5.049438e-001
Local=80
Value=4.286804e-001
Local=84
Value=3.110046e-001
I'll propose a couple of different ideas. One is to use discrete wavelets, the other is to use the geographer's concept of prominence.
Wavelets: Apply some sort of wavelet decomposition to your data. There are multiple choices, with Daubechies wavelets being the most widely used. You want the low frequency peaks. Zero out the high frequency wavelet elements, reconstruct your data, and look for local extrema.
Prominence: Those noisy peaks and valleys are of key interest to geographers. They want to know exactly which of a mountain's multiple little peaks is tallest, the exact location of the lowest point in the valley. Find the local minima and maxima in your data set. You should have a sequence of min/max/min/max/.../min. (You might want to add an arbitrary end points that are lower than your global minimum.) Consider a min/max/min sequence. Classify each of these triples per the difference between the max and the larger of the two minima. Make a reduced sequence that replaces the smallest of these triples with the smaller of the two minima. Iterate until you get down to a single min/max/min triple. In your example, you want the next layer down, the min/max/min/max/min sequence.
Note: I'm going to describe the algorithmic steps as if each pass were distinct. Obviously, in a specific implementation, you can combine steps where it makes sense for your application. For the purposes of my explanation, it makes the text a little more clear.
I'm going to make some assumptions about your problem:
The windows of interest (the signals that you are looking for) cover a fraction of the entire data space (i.e., it's not one long signal).
The windows have significant scope (i.e., they aren't one pixel wide on your picture).
The windows have a minimum peak of interest (i.e., even if the signal exceeds the background noise, the peak must have an additional signal excess of the background).
The windows will never overlap (i.e., each can be examined as a distinct sub-problem out of context of the rest of the signal).
Given those, you can first look through your data stream for a set of windows of interest. You can do this by making a first pass through the data: moving from left to right, look for noise threshold crossing points. If the signal was below the noise floor and exceeds it on the next sample, that's a candidate starting point for a window (vice versa for the candidate end point).
Now make a pass through your candidate windows: compare the scope and contents of each window with the values defined above. To use your picture as an example, the small peaks on the left of the image barely exceed the noise floor and do so for too short a time. However, the window in the center of the screen clearly has a wide time extent and a significant max value. Keep the windows that meet your minimum criteria, discard those that are trivial.
Now to examine your remaining windows in detail (remember, they can be treated individually). The peak is easy to find: pass through the window and keep the local max. With respect to the leading and trailing edges of the signal, you can see n the picture that you have a window that's slightly larger than the actual point at which the signal exceeds the noise floor. In this case, you can use a finite difference approximation to calculate the first derivative of the signal. You know that the leading edge will be somewhat to the left of the window on the chart: look for a point at which the first derivative exceeds a positive noise floor of its own (the slope turns upwards sharply). Do the same for the trailing edge (which will always be to the right of the window).
Result: a set of time windows, the leading and trailing edges of the signals and the peak that occured in that window.
It looks like the definition of a window is the range of x over which y is above the threshold. So use that to determine the size of the window. Within that, locate the largest value, thus finding the peak.
If that fails, then what additional criteria do you have for defining a region of interest? You may need to nail down your implicit assumptions to more than 'that looks like a peak to me'.