I have a problem while executing a SSIS script component. To be honest I am learning SSIS and for the script component, I am going thru The Script Component as a Transformation Article. I have so far done whatever has been stated there . But while I am trying to execute the package, I am encountering the below error
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Data Flow Task [Script Component [16]]: The script component is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Component Editor by clicking Design Script button to cause binary code to be generated.
Error at Data Flow Task [DTS.Pipeline]: "component "Script Component" (16)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
A bit of googling reveals the following Package Validation Error . So after going thru that , I understood what is the cause of the problem but how to rectify that , I don't know. Moreover, debugging is not possible.
Please help me.
EDIT
At last I found out that the Precompiled Option should be set to FALSE. Default is TRUE. It solved the problem.
Thanks
Sometime is enough to rebuild the task, just edit it and build in vsta.
You typically get this error when some portion of your script is no longer functioning correctly. This is often due to a dependency in the script that is no longer valid. Why can't you debug the package? If this is not your package then you're going to have to find the person who wrote it and have them fix the errors.
We recently ran into this issue and discovered is was because our code was too modern. The person who wrote the script used some newer code candy like:
somestring = $"{somevariable}-{Someothervariable}"
SomeFunctionWithOutParameter(out bool myResult)
It looked fine in the VS2017 editor on my colleague's machines but for some reason when I edited the script it was being pulled up in VS2015 (SSIS was being edited in VS2017) and the code was flagged.
After reverting the code to older style using String.Format() and pre-declaring the out variable the script was able to compile and run.
My guess is that whatever is compiling the script task code is not using the latest and greatest c# compiler.
Related
does anyone had this issue before? When I try to build a Script Component in SSIS but get the following error:
This does not give any context and actually it never starts the building so I don't know what is this.
I have created an .ade from an adp without problems.
When I try to open the .ade file I get the following error:
"Requested type library or wizard is not a VBA project"
The following files are my project:
Lib.ade (Version 1): external library
MainProgram.ade: compiled and made ade when the reference is to Version 1 and it works fine.
I sent these two file to client station without any problems but when I did some new changes and make new Lib.ade (Version 2) and sent to client environment, MainProgram (Version 1) gave the mentioned error.
Thanks for any help.
I got the same error message and it turned out to be a "Phantom Breakpoint" issue. See my posting here for more information:
https://stackoverflow.com/a/56565372/5795793
After several debug sessions in the original file (an ACCDB file in my case), it started breaking to a code line where I had previously, mistakenly left a breakpoint. Even though no breakpoint appeared, I had to duplicate the sub and comment out the original sub for it to work.
Sounds like there might be a phantom breakpoint in Version 2 of the Lib.ade. If so, copying the code elsewhere and commenting out the old code can work. Decompililng may also fix it.
Perhaps my experiences with the same problem will help someone.
Error "Requested type library or wizard is not a VBA project" occurred only in ACCDE, when trying to switch between tabs in level 2 navigation form. Explored all the options with references to library files, decompiling and recompiling, creating new DB and suppressing error message.
The only thing that worked for me is:
in ACCDB Remove all VBA code from the navigation form. Event Property Sheet sheet should be cleared of any events.
In the Other Property Sheet set "Has Module" to NO. (this should anyway delete the all code in the Navigation Form mentioned in step 1, so perhaps step 1 is not required, but better safe than sorry)
Save, Compact&Repair, Compile, Save as ACCDE
Enjoy.
Question:
Does anyone else experience this problem? And if so, what is the solution or my best course of action?
Problem Statement:
Libraries Fatal Flaw: "Library with identifier FOO is missing (perhaps it was deleted?)" + "We're sorry, a server error occurred. Please wait a bit and try again."
Please provide a short description of the issue:
Running any function in my GAS project results in the following error message:
"Library with identifier FOO is missing (perhaps it was deleted?)"
If I try to make any changes to my libraries (under the Resources tab) including:
updating the library FOO to the latest version,updating a second library (let's call it BAR) to the latest versionupdating FOO or BAR to any other versionsdeleting FOO or BAR completely orturning off development mode for FOO or BAR (which are currently in development mode).
In short, any change to the library resources are met with the following error message:
"We're sorry, a server error occurred. Please wait a bit and try again."
I first observed this error message today.I have never seen this problem before since I started this project at least two years ago or more.
Please provide a small sample script that reliably reproduces the issue.
The sample should run as-is or with minimal setup, without external
dependencies.
function test(){Logger.log("A")}
What steps will reproduce the problem?
Delete all code in my project.
Copy and paste the above function named "test" into a script file in my project.
Attempt to run the above function named "test."
After attempting to run "test" and seeing the error message: "Library with identifier FOO is missing (perhaps it was deleted?)," open Resources > Libraries.
Attempt to update FOO to it's most recent version. Or make any change to any of the libraries.
What is the expected output?
After running the function "test" I expect to see that it has successfully completed and the logger reads "A."
After trying to update the libraries, I expect to see the new library version in the dialogue box.
What do you see instead?
I see the error message: "Library with identifier FOO is missing (perhaps it was deleted?)"
I see the error message: "We're sorry, a server error occurred. Please wait a bit and try again."
Please provide any additional information below.
I have created a new project (let's call it B), copied and pasted all the code from the problem project (let's call it A) to B and successfully integrated the FOO and BAR libraries (latest versions) into B. After doing so, B runs fine without any error. The problem is that all my scriptDB data is still stored in A. Without being able to run any functions from A, I can not export any of my data from A. Otherwise, I would attempt a "messy" workaround such as restarting with B and updating all my (3rd party) calls to A with calls to B, for example.
Summary from comments:
Per #SoftwareTester:
I also experience this problem. I created a new file, copied all my code, provided a new name the lib (so instead of 'var a = AAA.myFunction' I now use 'var a = BBBBBB.myfunction'), changed every name of function, variable and text into BBBBBB. But still I could not run my (short and easy) testscript because of the missing library. I noticed that I deleted an old version (version 1) of the library by accident. Maybe that created the problem. I can imagine that because of the versioning system (keeping track of every code changes) old code reffering to the deleted version-1 causes the problem.
I am working in BIDS for 2008 R2
I have an annoying issue that I have not found the solution to yet. The error message is below. The line of code the error message refers to was from a Script Task that I deleted yesterday. My SSIS package executes fine and I am getting close to publishing the production version. I would like to clean up this non-fatal error first.
Would anyone have any suggestions on how to clear this up?
Thanks!
*Attempt to parse the expression "#[User::SS_Directory] +"''" + #["User::SS_InputFolderName] + "\" + #[User:SS_InputFileName]" failed and returned error code 0xC00470A6. The expression cannot be parsed. It might contain invalid elements or it might no be well-formed. There may also be an out-of-memory error.*
try
to rename the pkg and rebuild it, then rename back again.
check the connection manager
use format -> auto layout- diagram
open as text and lok for the string in the error
Mario
Is there a compiler option in ms-access (2003) that requires all vba code to compile before allowing any code to run? I'd like to be able to turn it off. I've tried the unchecking the 'Require Variable Declaration' and 'Auto Syntax Check' options, but no result.
Background information
I've just been given an ms-access database that runs fine on their machine but will not run on my machine. I get this error message on startup:
"The expression On Open you entered as the event property setting produced the following error: Method or data member not found"
This is caused by vba compilation errors in what looks like redundant code. Interestingly the code doesn't compile on either machine, but on their machine it database is usable on my machine it isn't! I assume its something simple like a compiler option, except I can't find it!
(Before anyone mentions it I know that the real solution to the problem is to fix/remove the bad code)
Code will run in MS Access without all code compiling, however, On Open is a form property that runs code when the form is opened, so the code in that event will be compiled and run when the form opens. I have encountered this error before when a version of Access is run on a PC that has two versions installed (specifically, <2007 and >=2007). For me, the solution was to choose Repair from the Help menu.
Access has a /decompile command line switch. See the accepted answer to this StackOverflow question.