I have a perforce repository on Windows machine say (p4). I can access this p4 repo using p4v client by providing IP:PortNumber details.
Now I want to run "hg convert" command on this p4 repository from Linux machine so that p4 will be converted in to "p4-hg" a mercurial repository.
Mercurial is already installed on linux box and "hg convert" extension is also enabled.
hg convert command is running perfectly.
I tried to convert p4 to hg using below command on linux box but it's not working:
hg convert http://ipAddressandPortNumber /home/p4-hg
On local machine I am able to convert any perforce repo to mercurial repo.
That means, URL path does not work with "hg convert" command?
Please suggest me something.
From a Perforce point of view, your command looks wrong.
If you can connect using p4v, you know the p4 server works. Try something like this (assuming Unix-like operating system, change as appropriate):
$ export P4PORT=ip.ad.re.ss:port
$ p4 login
( ... enter your password ...)
$ hg convert //depot/... /home/p4-hg
Assuming the "hg convert" command uses p4 underneath (which I assume it must), then this should help. If that doesn't work, you need to be more specific about the error message and how it is breaking.
You're correct that the perforce repository needs to be local for Mercurial to convert it. You'll need to copy it locally to convert.
Related
In Git, there is the command
git remote show <remote>
When properly configured, this will show you the status of the remote compared to your local repository, including whether there are pending changes in either. I can't find a similar command in Mercurial. Am I missing something or does it just not exist?
Perhaps hg summary --remote?
To compare local and remote repositories follow these steps:
go to local repo folder (use cd path_to_local_repo)
run "hg outgoing -p path_to_remote_repo" (without quotes)
See GenerateDiffBetweenRepositories
I am a new guy in using Mercurial to maintain my code editions. My company's server is using SVN and I want to maintain my local repository, so I am commit into my Hg when I have a little change to my code. After testing my code carefully, then I can push back my code into SVN server.
I install TortoiseHg and I can clone other open source project to my computer. And I have HgSubversion plugin installed correctly.
Right now I can do the clone operation using following commands:
$ hg clone svn+https://XXXX:8443 test
But after the clone is finished, there is just a folder .hg under test folder.
Why this happen? How can I fix it?
Thanks
Water Lin
It might has some files which stored with non-ascii file name in repository. Mercurial can't treats non-ascii file name correctly so far. Have you tried to check out the log? You can do it with command "hg log" to make sure all files had been imported in to Mercurial. Then download and install the extention fixutf8. That can fix the problem. After you install fixutf8 you can update current working folder to tip reversion again.
I created a repository on a remote machine using:
hg init
hg add
hg commit
The repository was created.
I cloned the repository on a local machine with no errors reported; The files seem to be there
Now I'm trying to make a clone of the clone (as a working copy) using:
hg clone "path to original clone"
It returns:
destination directory: "name of repository"
abort: No such file or directory: "path to original clone"/.hg/store/lock
What am I doing wrong?
Thanks
What filesystem is used on the partition where the main repository is ?
Actually, when Mercurial is doing some operations, it needs to lock the repository. For doing this it creates a symbolic link to an nonexistent file, when the filesystem supports it, in the .hg repository, telling every other processes that the repository can't be modified at this time. When symbolic links aren't supported by the filesystem, a normal file is created.
However, there's some problems with some FUSE filesystems, typically SSHFS with the follow_symlinks option activated. FUSE reports that he knows about symbolic links, but since SSHFS follows the symbolic link and the file doesn't exist, the "state" of the link is marked as unknown thus Mercurial thinks the repository isn't correctly locked and abort the operation.
I see you're using Cygwin, so maybe it's the same kind of problem with tools designed for UNIX on a windows filesystem. It's a strange, coworkers of mine are using Mercurial via Cygwin just fine.
I don't know if it's the case for you, but I lost nearly half a day on this problem. Maybe this answers can help some people in the future.
Please paste in the actual command that's failing and the output including the actual path to the clone that you're cloning. When you do the clone use --debug and --traceback too.
As a workaround you can can always try hg init newclone followed by hg pull -R newclone pathtooriginalclone, which is effectively equivalent except it doesn't use local hardlinks when possible.
I'm having some difficulty cloning my mercurial repository over ssh.
Here's what I have tried:
hg clone ssh://username#username.webfactional.com/path/to/projectname projectname
It's giving me this error:
remote: bash: hg: command not found
abort: no suitable response from remote hg!
hg is installed on the server, however.
I was trying to follow the instructions on this website.
You need a double // after hostname i.e.:
hg clone ssh://username#username.webfactional.com//path/to/projectname projectname
Sounds like hg is not on your path. The Mercurial FAQ mentions possible fixes for this issue: FAQ/CommonProblems.
Add the remotecmd value to your Mercurial configuration by opening ~/.hgrc (or Mercurial.ini on Windows) on your client machine and adding the following:
[ui]
remotecmd = /path/to/hg
where /path/to/hg is the path to the hg command on the remote server.
If you're having problems with your Mercurial configuration, you can use the hg showconfig --debug command to obtain a full list of your Mercurial settings along with the path and line number of the configuration file that defines each configuration value.
Looks like mercurial isn't in your user's PATH on the remote server.
On webfactional I had to add:
export PATH=$PATH:/home/<user>/bin
to .bashrc to get it to work.
(also followed the remotecmd advice above)
You can use Sourcetree, TortoiseHg, Mercurial from the terminal, or any client you like to clone your Mercurial repository. These instructions show you how to clone your repository using Mercurial from the terminal.
From the repository, click + in the global sidebar and select Clone
this repository under Get to work.
Copy the clone command (either the SSH format or the HTTPS).
If you are using the SSH protocol, ensure your public key is in Bitbucket and loaded on the local system to which you are cloning.
From a terminal window, change to the local directory where you want to clone your repository.
Paste the command you copied from Bitbucket, for example:
CLONE OVER HTTPS:
$ hg clone https://username#bitbucket.org/teamsinspace/hg-documentation-tests
CLONE OVER SSH:
$ hg clone ssh://hg#bitbucket.org/teamsinspace/hg-documentation-tests
If the clone was successful, a new sub-directory appears on your local drive.
This directory has the same name as the Bitbucket repository that you cloned.
The clone contains the files and metadata that Mercurial requires to maintain the changes you make to the source files.
On the server, type: nano ~/.bashrc end edit the file by adding:
# User specific aliases and functions
export PATH=$PATH:$HOME/packages/mercurial
Under the assumption that ~/packages is the folder where mercurial was installed.
After editing, finish off with source ~/.bashrc and try again.
Pretty helpful to me was the following elaborate guide to install mercurial on a Bluehost hosting server.
I have installed mercurial and review board extension for mercurial on my Windows XP machine. In review board, I have added a repository say "MyRepo" which is on a central server.
I cloned "MyRepo" to my local machine, modified a file for testing and committed to my local repo. I haven't yet pushed it to my central repo.
Now I run "hg postreview" on my cloned local repo. I select "MyRepo" when postreview asks me to choose a repo.
I get a "File not found (207)" error after the command completion. Howver, my review request is uploaded to Review Board server but the diff file is not. Can you tell me what am I doing wrong or is there a patch or command I am not aware of?
I am a novice in DVCS and mercurial, so any help on this matter is really appreciated.
It sounds like you already pushed changes or did more than one commit to the clone (that diffs now more than one commit). Try this and refer to the changeset you created the clone from:
hg postreview -l -o --parent={changeset}
If you wan’t to submit further editings refer to the rewiewid and changeset your first postreview command submitted:
hg postreview -e {reviewid} -o --parent={changeset}