I want to make a table in SqlServer that will add, on insert, a auto incremented primary key. This should be an autoincremented id similar to MySql auto_increment functionality. (Below)
create table foo
(
user_id int not null auto_increment,
name varchar(50)
)
Is there a way of doing this with out creating an insert trigger?
Like this
create table foo
(
user_id int not null identity,
name varchar(50)
)
OP requested an auto incremented primary key. The IDENTITY keyword does not, by itself, make a column be the primary key.
CREATE TABLE user
(
TheKey int IDENTITY(1,1) PRIMARY KEY,
Name varchar(50)
)
They have answered your question but I want to add one bit of advice for someone new to using identity columns. There are times when you have to return the value of the identity just inserted so that you can insert into a related table. Many sources will tell you to use ##identity to get this value. Under no circumstances should you ever use ##identity if you want to mantain data integrity. It will give the identity created in a trigger if one of them is added to insert to another table. Since you cannot guarantee the value of ##identity will always be correct, it is best to never use ##identity. Use scope_identity() to get this value instead. I know this is slightly off topic, but it is important to your understanding of how to use identity with SQL Server. And trust me, you did not want to be fixing a problem of the related records having the wrong identity value fed to them. This is something that can quietly go wrong for months before it is dicovered and is almost impossible to fix the data afterward.
As others have mentioned: add the IDENTITY attribute to the column, and make it a primary key.
There are, however, differences between MSSQL's IDENTITY and MySQL's AUTO_INCREMENT:
MySQL requires that a unique
constraint (often in the form of a
primary key) be defined for the
AUTO_INCREMENT column.MSSQL doesn't have such a requirement.
MySQL lets you manually insert values into an AUTO_INCREMENT column.
MSSQL prevents you from manually inserting a value into an IDENTITY
column; if needed, you can override
this by issuing a "SET
IDENTITY_INSERT tablename ON"
command before the insert.
MySQL allows you to update values in an AUTO_INCREMENT column.MSSQL refuses to update values in an
IDENTITY column.
Just set the field as an identity field.
declare the field to be identity
As advised above, use an IDENTITY field.
CREATE TABLE foo
(
user_id int IDENTITY(1,1) NOT NULL,
name varchar(50)
)
As others have said, just set the Identity option.
Related
I have an old MS Access DB which I'm translating to a MySQL DB. I used bullzip to create the database but due to bad design the old MS Access database didn't have a unique primary key for most of the tables.
So I've created a id field but obviously it's empty for each entry, I wonder if there's a simple statement I can use to fill them up with 1, 2, 3, 4 etc...
EDIT:
I think I haven't gotten my question across properly. I know all about auto increment. Thats not the problem.
I have a table, full of records which I need kept and which came from a Access database that didn't have a unique id defined as a field. In otherwords I have fields for firstname, surname etc etc but no field 'id'. This seems absolutely crazy but apparently this database has been well used and never had any unique ids for any tables bar one. Weird!
Anyway, I've created a field in the table for id (and set it to auto increment of course) but obviously all the existing records don't have an id set currently. So I need to create one for each record.
Is there a way to fill all these records with unique numbers using a mysql statement?
Cheers
If you add an new id column to an existing table and make it AUTO_INCREMENT PRIMARY KEY, it will automatically populate it with incrementing values.
mysql> ALTER TABLE TheTable ADD COLUMN id INT AUTO_INCREMENT PRIMARY KEY;
mysql> SELECT id FROM TheTable;
-- outputs values 1, 2, 3, etc.
If you made an id column but didn't declare it AUTO_INCREMENT PRIMARY KEY, you can populate the column like this:
mysql> SET #id := 0;
mysql> UPDATE TheTable SET id = (#id := #id+1);
Use a predefined AUTO_INCREMENT field, and set the value as NULL when inserting new records, so that it automatically builds up an appropriate incrementer. Aside from that, there is no way (unless using a procedure) to create an incrementing set of values
Use the auto_increment feature of MySQL. MySQL will generate unique numbers for your id column.
For an explanation of the auto_increment feature see http://dev.mysql.com/doc/refman/5.0/en/example-auto-increment.html
If you just want a unique identifier, you can use the uuid() function. It takes up a bit more space than an integer, but it does what you want.
However, I agree with the other answers that you should add an auto increment column and repopulate the table. That is the simplest way to keep the ids unique over time, even as updates takes place, and using a more reasonable amount of storage.
I am not proficient in MySQL, but I have faced this same problem in other DBMS's and here is how I have addressed it when there was an AutoIncrement type facility, but the DBMS had no way to automatically apply it retroactively:
Rename the table you want to add the ID field to. So rename Table1 to Table1_Old.
Create a new Table1 that is a copy of Table1_Old except that it has no data in it.
Add your ID/AutoIncrement column to Table1
Now copy all of the data from Table1_Old to Table1, either skipping or specifying NULL for the ID column. (This is usually a single INSERT..SELECT.. command)
Drop Table1_Old.
The actual specifics and commands vary from DBMS to DBMS, but I have usually been able to find a way to do these steps.
Use AUTO_INCREMENT
CREATE TABLE insect
(
id INT UNSIGNED NOT NULL AUTO_INCREMENT,
PRIMARY KEY (id),
name VARCHAR(30) NOT NULL,
date DATE NOT NULL,
origin VARCHAR(30) NOT NULL
);
Update
I believe, it seems tough task unless you won't create new table, I will suggest you to use this
SET #rank=0;
SELECT #rank:=#rank+1 AS rank, itemID FROM orders;
It will create a virtual column with the name rank for you, which have unique id value.
In my database, all Primary Keys are surogate. There are some Unique keys, but not always, so the most safe way to access specific row is Primary Key. Many of them use AUTO_INCREMENT. Do I have to lock access to database when inserting into two related table? For example.
create table foo
(
foo_id numeric not null auto_increment,
sth varchar,
PRIMARY KEY(foo_id)
)
create table bar
(
bar_id numeric not null auto_increment,
foo_id numeric not null,
PRIMARY KEY(bar_id),
FOREIGN KEY (foo_id) REFERENCES foo(foo_id)
)
First I insert sth to foo, and then I need foo_id value to insert related stuff into bar. This value I can get from INFORMATION_SCHEMA.TABLES. But what if somebody will add new row into foo before I get the auto_increment value? If all these steps are in stored procedure is there implicitly started transactions which locks all needed resources for one procedure call? Or maybe I have to use explicitly START TRANSACTION. What if I dont use procedure - just sequence of inserts and selects?
Instead of looking in INFORMATION_SCHEMA.TABLE, I would suggest that you use LAST_INSERT_ID.
From the MySQL documentation: The ID that was generated is maintained in the server on a per-connection basis. This means that the value returned by the function to a given client is the first AUTO_INCREMENT value generated for most recent statement affecting an AUTO_INCREMENT column by that client.
This imply that an insert done at the same time on a different connection will not change the value that is returned on your current connection.
Run queries in that sequence:
INSERT INTO foo (sth) VALUES ('TEST');
Than:
INSERT INTO bar (foo_id) VALUES (SELECT LAST_INSERT_ID());
I need to create a database table in which I have the following three fields mainly:
ID(default auto incrementing).
User_id( starting from 1000 ,auto incrementing)
Email
So, I want to set Email to be unique ,not null( Primary key ),but also I want to make sure that User_id remains unique ( that can be solved by setting unique key ) and I also want it to never be set as null. So, how I can achieve this? I am using MySQL BTW.
PS: I am not much good to this schema building for the current time. So, ignore any silly mistakes.
I would go for something like this
CREATE TABLE USERS
(
ID INT PRIMARY KEY AUTO_INCREMENT,
User_Id INT AUTO_INCREMENT = 1000,
Email VARCHAR(250) NOT NULL
)
And then
ALTER TABLE USERS ADD UNIQUE (Email)
Or if you intend to search on the Email field
CREATE UNIQUE INDEX inx_users_email ON USERS (Email)
You are better of using the Id field as your primary key. The PK is not meant to change and is used to identify the record. What happens if your user changes email address?
Auto_INCREMENT ensures column has unique values and can never be null.
I am entering records in the MySQL DB. Now I want to have a "Serial_Number" field that increements automatically whenever a record is entered into the DB.
I don't want this "Serial_Number" field to be the primary key of the DB.
How can I create this field (with the attributes needed to be set).
I am using "SQL YOG" to access MySQL. If you are aware of the SQL YOG then tell me how to do that through SQL YOG.
The AUTO_INCREMENT column has to have a UNIQUE KEY constraint associated to it.
For instance, this will work just fine:
CREATE TABLE AutoNotId
(
Id INTEGER PRIMARY KEY,
Auto INTEGER AUTO_INCREMENT,
UNIQUE (Auto)
);
Edit:
The ALTER statement would look somewhat like this:
ALTER TABLE AutoNotId
MODIFY COLUMN Auto INTEGER AUTO_INCREMENT,
ADD UNIQUE (Auto);
I recommended, however the use of the long-hand syntax to specify the name of the UNIQUE constraint; But you can always refer to MySQL's Reference Manual for the exact specifications.
In MySQL tables can only have one auto increment field and they must be indexed.
There can be only one AUTO_INCREMENT column per table, it must be indexed, and it cannot have a DEFAULT value.
Is there a reason you don't want it to be the primary key?
If you want an incrementing value, you could fudge it by running updates after each insert:
SELECT MAX(serial) + 1 FROM myTable;
UPDATE myTable SET serial = <that number> WHERE id = ...
I don't think you can have an auto increment field:
CREATE TABLE `t` (`dd` int(11) NOT NULL)
ALTER TABLE `t` CHANGE `dd` `dd` INT( 11 ) NOT NULL AUTO_INCREMENT
MySQL said: Documentation
#1075 - Incorrect table definition; there can be only one auto column and it must be defined as a key
You cannot do this in MySQL. From the doc:
There can be only one AUTO_INCREMENT
column per table, it must be indexed,
and it cannot have a DEFAULT value. An
AUTO_INCREMENT column works properly
only if it contains only positive
values. Inserting a negative number is
regarded as inserting a very large
positive number. This is done to avoid
precision problems when numbers “wrap”
over from positive to negative and
also to ensure that you do not
accidentally get an AUTO_INCREMENT
column that contains 0.
For MyISAM and BDB tables, you can
specify an AUTO_INCREMENT secondary
column in a multiple-column key. See
Section 3.6.9, “Using AUTO_INCREMENT”.
create table mytable (
ID INT IDENTITY(1,1) PRIMARY KEY,
SN INT IDENTITY(1,1)
)
I'm trying the following:
CREATE TABLE Table1
(
RecordNo autonumber, --error here!
PersonId varchar(50),
...
)
But, there is an error.
How can I build the correct query in Access?
According to SQL Auto Increment a Field:
CREATE TABLE Persons
(
P_Id PRIMARY KEY AUTOINCREMENT,
LastName varchar(255) NOT NULL,
FirstName varchar(255),
Address varchar(255),
City varchar(255)
)
The MS Access uses the AUTOINCREMENT
keyword to perform an auto-increment
feature.
By default, the starting value for
AUTOINCREMENT is 1, and it will
increment by 1 for each new record.
To specify that the "P_Id" column
should start at value 10 and increment
by 5, change the autoincrement to
AUTOINCREMENT(10,5).
Synonyms for AUTOINCREMENT include COUNTER and IDENTITY. Using IDENTITY the makes a lot of sense because it matched the #IDENTITY variable which returns the last used autonumber value.
The order might be important
CREATE TABLE Persons
( pkObject AUTOINCREMENT PRIMARY KEY)
If I try PRIMARY KEY AUTOINCREMENT as suggested, it gets upset (MSAccess 2010).
Method 1:
Open table in design view
Make a field named "ID" or whatever the field will be that will have the Auto Increment
Put "AutoNumber" under DataType
Method 2:
Make a new table
Close the table and save it
When it asks if you want a primary key click ok
Open the table in Design View
Edit the new field to whatever name you like
When using ancient DAO 3.60 and Jet 4.0 with Access 2003 files, Eugene Yokota'a syntax did not work. I found that COUNTER keyword will do the trick:
CREATE TABLE tablename(id COUNTER, Name Text (30))
Thanks to this post:
http://www.vbforums.com/showthread.php?234335