I installed on my vps gitlab runner, but every time I use in gitlab-ci.yml
tags:
- vps
I have a hold of 5 minutes (minimum) each time.
I installed gitlab runner with
apt-get install gitlab-runner
whereas if I use the gitlab-=runner from gitlab.com I don't get the hold
gitlab-runner info:
gitlab-runner status Runtime platform arch=amd64 os=linux pid=662441 revision=133d7e76 version=15.6.1
concurrent = 1
check_interval = 0
shutdown_timeout = 0
[session_server]
session_timeout = 1800
[[runners]]
runner 1:
[[runners]]
name = "name1"
url = "https://gitlab.com/"
id = 123
token = "ABC"
token_obtained_at = 2022-11-26T20:24:16Z
token_expires_at = 0001-01-01T00:00:00Z
executor = "shell"
[runners.custom_build_dir]
[runners.cache]
MaxUploadedArchiveSize = 0
[runners.cache.s3]
[runners.cache.gcs]
[runners.cache.azure]
runner2:
[[runners]]
name = "runner2"
url = "https://gitlab.com/"
id = 456
token = "ABC"
token_obtained_at = 2022-11-26T20:34:45Z
token_expires_at = 0001-01-01T00:00:00Z
executor = "docker"
[runners.custom_build_dir]
[runners.cache]
MaxUploadedArchiveSize = 0
[runners.cache.s3]
[runners.cache.gcs]
[runners.cache.azure]
[runners.docker]
tls_verify = false
image = "ruby:latest"
privileged = false
disable_entrypoint_overwrite = false
oom_kill_disable = false
disable_cache = false
volumes = ["/cache"]
shm_size = 0
thank you
I am developing a small project using freeradius 3.0.20 on linux ubuntu 20.04 machine..
installed freeradius, configured mysql on default.conf... loaded virtual servers.. and my device can connect ok..
On init i can see NAS information being loaded from MYSQL table, info is stored everything ok..
client data stored in radcheck, radgroupgcheck,radgroupreply,radipool storing the cgnat ip table etc..
client device logs in with username and password all ok i can navigate on the internet with client logged in, but its not storing clients data on the accounting radacct table on the mysql... no history logs stored at all .. only thing i can see is radpostauth storing username, password xored md5 and authdate which contains the login date only.. attached below full log init from freeradius -x
if anyone can comment, or knows how to fix this configuration issue..
root#PSI-DEV:~# sudo freeradius -X
FreeRADIUS Version 3.0.20
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/sql
including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/sqlippool
including configuration file /etc/freeradius/3.0/mods-config/sql/ippool/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
Debugger not attached
systemd watchdog is disabled
# Creating Auth-Type = mschap
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_exec
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_sql
# Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = 3306
login = "radius"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = yes
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
logfile = "/var/log/freeradius/radacct/sql.log"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
safe_characters = "#abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
auto_escape = no
accounting {
reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime,acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime = (#acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(#acctupdatetime_old), acctstoptime = NULL, framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
}
}
post-auth {
reference = ".query"
logfile = "/var/log/freeradius/post-auth.sql"
query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "#"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_detail
# Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
# Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters = "#abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_sqlippool
recreate radacct table with auto increment. it will fix it.
import the radacct table from freeradius github link.
My producer isnt throwing any errors but data is not being sent to the destination topic. Can you recommend any techniques to debug this situation.
I have call to a Confluent Python Avro Producer inside a synchronous loop to send data to a topic like so:
self.producer.produce(topic=test2, value=msg_dict)
After this call I have a piece of code like so to flush the queue:
num_messages_in_queue = self.producer.flush(timeout = 2.0)
print(f"flushed {num_messages_in_queue} messages from producer queue in iteration {num_iterations} ")
this executes without any error. But also there is no callback fired after this code executes. My producer is initiated as follows:
def __init__(self,broker_url=None,topic=None,schema_registry_url=None,schema_path=None):
try:
with open(schema_path, 'r') as content_file:
schema = avro.loads(content_file.read())
except Exception as e:
print(f"Error when trying to read avro schema file : {schema_path}")
self.conf = {
'bootstrap.servers': broker_url,
'on_delivery': self.delivery_report,
'schema.registry.url': schema_registry_url,
'acks': -1, #This guarantees that the record will not be lost as long as at least one in-sync replica remains alive.
'enable.idempotence': False, #
"error_cb":self.error_cb
}
self.topic = topic
self.schema_path = schema_path
self.producer = AvroProducer(self.conf,default_key_schema=schema, default_value_schema=schema)
My callback method is as follows:
def delivery_report(self, err, msg):
print(f"began delivery_report")
if err is None:
print(f"delivery_report --> Delivered msg.value = {msg.value()} to topic= {msg.topic()} offset = {msg.offset} without err.")
else:
print(f"conf_worker AvroProducer failed to deliver message {msg.value()} to topic {self.topic}. got error= {err}")
After this code is executed, I look at my topic on the schema registry container like so:
docker exec schema_registry_container kafka-avro-console-consumer --bootstrap-server kafka:29092 --topic test2 --from-beginning
I see this output:
[2020-04-03 15:48:38,064] INFO Registered kafka:type=kafka.Log4jController MBean
(kafka.utils.Log4jControllerRegistration$)
[2020-04-03 15:48:38,742]
INFO ConsumerConfig values:
auto.commit.interval.ms = 5000
auto.offset.reset = earliest
bootstrap.servers = [kafka:29092]
check.crcs = true
client.dns.lookup = default
client.id =
connections.max.idle.ms = 540000
default.api.timeout.ms = 60000
enable.auto.commit = false
exclude.internal.topics = true
fetch.max.bytes = 52428800
fetch.max.wait.ms = 500
fetch.min.bytes = 1
group.id = console-consumer-49056
heartbeat.interval.ms = 3000
interceptor.classes = []
internal.leave.group.on.close = true
isolation.level = read_uncommitted
key.deserializer = class >> org.apache.kafka.common.serialization.ByteArrayDeserializer
max.partition.fetch.bytes = 1048576
max.poll.interval.ms = 300000
max.poll.records = 500
metadata.max.age.ms = 300000
metric.reporters = []
metrics.num.samples = 2
metrics.recording.level = INFO
metrics.sample.window.ms = 30000
partition.assignment.strategy = [class org.apache.kafka.clients.consumer.RangeAssignor]
receive.buffer.bytes = 65536
reconnect.backoff.max.ms = 1000
reconnect.backoff.ms = 50
request.timeout.ms = 30000
retry.backoff.ms = 100
sasl.client.callback.handler.class = null
sasl.jaas.config = null
sasl.kerberos.kinit.cmd = /usr/bin/kinit
sasl.kerberos.min.time.before.relogin = 60000
sasl.kerberos.service.name = null
sasl.kerberos.ticket.renew.jitter = 0.05
sasl.kerberos.ticket.renew.window.factor = 0.8
sasl.login.callback.handler.class = null
sasl.login.class = null
sasl.login.refresh.buffer.seconds = 300
sasl.login.refresh.min.period.seconds = 60
sasl.login.refresh.window.factor = 0.8
sasl.login.refresh.window.jitter = 0.05
sasl.mechanism = GSSAPI
security.protocol = PLAINTEXT
send.buffer.bytes = 131072
session.timeout.ms = 10000
ssl.cipher.suites = null
ssl.enabled.protocols = [TLSv1.2, TLSv1.1, TLSv1]
ssl.endpoint.identification.algorithm = https
ssl.key.password = null
ssl.keymanager.algorithm = SunX509
ssl.keystore.location = null
ssl.keystore.password = null
ssl.keystore.type = JKS
ssl.protocol = TLS
ssl.provider = null
ssl.secure.random.implementation = null
ssl.trustmanager.algorithm = PKIX
ssl.truststore.location = null
ssl.truststore.password = null
ssl.truststore.type = JKS
value.deserializer = class >>org.apache.kafka.common.serialization.ByteArrayDeserializer
(org.apache.kafka.clients.consumer.ConsumerConfig)
[2020-04-03 15:48:38,887] INFO Kafka version : 2.1.0-cp1 (org.apache.kafka.common.utils.AppInfoParser)
[2020-04-03 15:48:38,887] INFO Kafka commitId : bda8715f42a1a3db (org.apache.kafka.common.utils.AppInfoParser)
[2020-04-03 15:48:39,221] INFO Cluster ID: KHKziPBvRKiozobbwvP1Fw (org.apache.kafka.clients.Metadata)
[2020-04-03 15:48:39,224] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] Discovered group coordinator kafka:29092 (id: 2147483646 rack: null) (org.apache.kafka.clients.consumer.internals.AbstractCoordinator)
[2020-04-03 15:48:39,231] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] Revoking previously assigned partitions []
(org.apache.kafka.clients.consumer.internals.ConsumerCoordinator)
[2020-04-03 15:48:39,231] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] (Re-)joining group >(org.apache.kafka.clients.consumer.internals.AbstractCoordinator)
[2020-04-03 15:48:42,264] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] Successfully joined group with generation 1
(org.apache.kafka.clients.consumer.internals.AbstractCoordinator)
[2020-04-03 15:48:42,267] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] Setting newly assigned partitions [test2-0] >(org.apache.kafka.clients.consumer.internals.ConsumerCoordinator)
[2020-04-03 15:48:42,293] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] Resetting offset for partition test2-0 to offset 0. >(org.apache.kafka.clients.consumer.internals.Fetcher)
So the answer is so trivial that its embarassing!
But it does point to the fact that in a multilayered infrastructure, a single value incorrectly set, can result in a silent failure which can be very tedious to track down.
So the issue came from incorrect param setting my in my docker-compose.yml file, where the env variable for broker_url was not set.
The application code needed this variable to reference the kafka broker.
However there was no exception thrown for this missing param and it was silently failing.
I'm having a weird issue since I installed sphinx on my Ubuntu Server. I've noticed every so often, I'll see a sphinx config file sql query showing up in my Mysql processlist. After checking top, I see that it is in fact running. When I kill the query, the indexer seems to abort. How do I stop this? I'm using this config file, from a tutorial I found online:
source src1
{
type = mysql
sql_host = localhost
sql_user = ***********
sql_pass = ***********
sql_db = ***********
sql_port = 3306
sql_query = \
SELECT id, group_id, UNIX_TIMESTAMP(date_added) AS date_added, title,
content \
FROM documents
sql_attr_uint = group_id
sql_attr_timestamp = date_added
}
index test1
{
source = src1
path = /var/lib/sphinxsearch/data/test1
docinfo = extern
}
searchd
{
listen = 9306:mysql41
log = /var/log/sphinxsearch/searchd.log
query_log = /var/log/sphinxsearch/query.log
read_timeout = 5
max_children = 30
pid_file = /var/run/sphinxsearch/searchd.pid
seamless_rotate = 1
preopen_indexes = 1
unlink_old = 1
binlog_path = /var/lib/sphinxsearch/data
}
Delete the lines in the file /etc/cron.d/sphinxsearch
# Rebuild all indexes daily and notify searchd.
#daily root . /etc/default/sphinxsearch && if [ "$START" = "yes" ] && [ -x /usr/bin/indexer ]; then /usr/bin/indexer --quiet --rotate --all; fi
I bought and installed PhpStorm. Next I decided configure xdebug. I set up and saw this info
"Waiting for incoming connection with ide key 'PHPSTORM'"
I so much did and nothing didn't help me. Please help me.
[Xdebug]
zend_extension="%sprogdir%/modules/php/%phpdriver%/ext/php_xdebug.dll"
;xdebug.default_enable = 1
xdebug.auto_trace = 0
xdebug.collect_includes = 1
;xdebug.collect_params = 4
;xdebug.collect_return = 1
;xdebug.collect_assignments = 1
;xdebug.collect_vars = 1
xdebug.dump.REQUEST = *
xdebug.dump.SESSION = *
xdebug.dump.SERVER = REMOTE_ADDR,REQUEST_METHOD
;xdebug.dump.COOKIE =
;xdebug.dump.FILES =
;xdebug.dump.GET =
;xdebug.dump.POST =
xdebug.dump_globals = 1
xdebug.dump_once = 1
xdebug.dump_undefined = 1
xdebug.extended_info = 1
;xdebug.file_link_format = ""
xdebug.idekey = "PHPSTORM"
;xdebug.manual_url = "http://www.php.net"
xdebug.max_nesting_level = 256
xdebug.overload_var_dump = 1
;xdebug.profiler_append = 1
xdebug.profiler_enable = 0
xdebug.profiler_enable_trigger = 1
xdebug.profiler_output_dir="%sprogdir%/userdata/temp/xdebug/"
xdebug.profiler_output_name = "cachegrind.out.%H%R"
xdebug.remote_autostart = on
xdebug.remote_enable = on
xdebug.remote_connect_back = on
;xdebug.remote_autostart = 0
;xdebug.remote_enable = 0
xdebug.remote_handler = "dbgp"
xdebug.remote_host = "localhost"
;xdebug.remote_log = "none"
xdebug.remote_mode = "req"
xdebug.remote_port = 9000
;xdebug.scream = 1
;xdebug.show_exception_trace = 0
;xdebug.show_local_vars = 1
;xdebug.show_mem_delta = 1
;xdebug.trace_format = 1
;xdebug.trace_options = 1
xdebug.trace_output_dir = "%sprogdir%/userdata/temp/xdebug/"
;xdebug.trace_output_name = "trace.%H%R"
xdebug.var_display_max_children = 256
;xdebug.var_display_max_data = 1024
xdebug.var_display_max_depth = 16
;xdebug.remote_cookie_expire_time = 3600
Did you enable 'Can accept external connections' in Preferences -> Build, Execution, etc. -> Debugger ?
Also try adding the remote log path
xdebug.remote_log = E:/Server/tmp/xdebug.log
so that you can collect xdebug logs and see what it has to say about it.
See this So thread for additional help
You can try chrome XDEBUG extension with simple xdebug configs. It works fine for me.
here are my configs
zend_extension = E:\wamp64\bin\php\php7.0.0\ext\php_xdebug-2.4.0-7.0-vc14-x86_64.dll
xdebug.remote_enable = 1
xdebug.var_display_max_depth = 16
xdebug.remote_port=9000
xdebug.var_display_max_data = 4096
xdebug.overload_var_dump = 1
xdebug.remote_cookie_expire_time=10800
xdebug.remote_host = "127.0.0.1"
xdebug.scream = 1
I ran into the same problem yesterday. I rummaged all the answers to this question on the Internet Unluckily, nothing works for me. However, I accidentally found a solution this morning.
OS: macOS Catalina 10.15.4
Xdebug: v2.9.6
Phpstorm: 2019.3.4 (don't reinstall your Phpstorm, this won't work.)
Step 1:
[Xdebug]
zend_extension = "/usr/local/Cellar/php#7.3/7.3.13/pecl/20180731/xdebug.so"
xdebug.remote_enable = on
xdebug.remote_host = localhost
xdebug.remote_port = 9000
xdebug.idekey= PHPSTORM
xdebug.remote_autostart = 1
Step 2:
Phpstorm -> Preferences -> Languages & Frameworks -> PHP -> Debug -> Debug port : 9000
Step 3:
Phpstorm -> Preferences -> Languages & Frameworks -> PHP -> Servers -> [delete all of configurations] Like below：
Step 4:
start listening for PHP debug connections. like below:
Step 5:
Start your PHP project by "php artisan serve" on your terminal.
Don't forget to add a breakpoint or turn on "Break at the first line in PHP script"
It works...wow!!!
If you don't want to enable debug mode, just turn off "listening for PHP debug connections"
Hope you have solved this problem now.