i have table = table_a
and filed =
val1,val2,val3 =(10,10,7)
i want get Avg value from val1,val2,val3 on mysql, i was try with AVG(val1,val2,val3) from table_a it's not work,
somebody can help me?
thanks
Since you want to get the average of the columns not rows, just perform basic calculation
(val1 + val2 + val3) / 3.0 AS Average
Related
I am attempting to plot data cumulatively from a MySQL table which logs a value, resetting to 0 every day. After selecting the values using select * from table where DateTime BETWEEN DateA AND DateB, the data looks like this: current data. I would like the output to look like this: preferred data, ignoring the daily resets.
As I am a novice in SQL I was unable to find a solution to this. I did, however, obtain the correct output in Matlab using a for loop:
output = data;
for k=1:(size(data, 1)-1)
% check if next value is smaller than current
if data(k+1)<data(k)
% add current value to all subsequent values
output = output + (1:size(data, 1)>k)'.*input(k);
end
end
I would like the final product to connect to a web page, so I am curious if it would be possible obtain a similar result using only SQL. While I have tried using SUM(), I have only been able to sum all values, but I need to add the last value each day to all subsequent values.
Using CTE and comparing dates, you can sum all values each date.
Let's say that table1 below is defined.
create table table1 (col_date date, col_value int);
insert into table1 values
('2020-07-15',1000),
('2020-07-15',2000),
('2020-07-16',1000),
('2020-07-16',3000),
('2020-07-16',4000),
('2020-07-17',1000),
('2020-07-18',2000),
('2020-07-19',1000),
('2020-07-19',1000),
('2020-07-19',2000),
('2020-07-19',3000),
('2020-07-20',4000),
('2020-07-20',5000),
('2020-07-21',6000)
;
In this case, the query looks like this:
with cte1 as (
select col_date, sum(col_value) as col_sum from table1
where col_date between '2020-07-16' and '2020-07-20'
group by col_date
)
select a.col_date, max(a.col_sum), sum(b.col_sum)
from cte1 a inner join cte1 b on a.col_date >= b.col_date
group by a.col_date;
The output is below:
col_date |max(a.col_sum) |sum(b.col_sum)
2020-07-16 |8000 | 8000
2020-07-17 |1000 | 9000
2020-07-18 |2000 |11000
2020-07-19 |7000 |18000
2020-07-20 |9000 |27000
The column of max() is just for reference.
I have a complex situation, as I am not able to write a single query for this.
I have a table like below:
ID MIN MAX PLEVEL
1 0 .50 P1
2 .51 1.00 P2
3 1.01 1.02 P3
I have a variable which can have any value like .23, .75 etc
I need query to check the PLEVEL related to this like
if variable = .23 than PLEVEL = P1
if varable = .75 than PLEVEL = P2
You can do this to look up the appropriate row in your table for a particular variable. (http://sqlfiddle.com/#!9/822676/9/0)
SET #variable := 0.23;
SELECT #variable, PLEVEL
FROM tbl
WHERE #variable <= `MAX` AND #variable > `MIN`
But, your table data may contain a flaw. What happens if your variable value is 0.505? It won't match any row.
You haven't given a lot of detail to go on, but it sounds like you want this:
SELECT PLEVEL from table WHERE variable >= MIN and variable <= MAX;
assuming min and max are number columns and you only want plevel returned.
The Immediate If (IIF) statement can be helpful
SELECT ID ,IIF(variable=.23,'P1',IIF(variable=.75,'P2','')) as Plevel From MyTable
Or you might want to look at the CASE command
I have for example a query with return something as it
route value
1 3
2 2
3 4
4 5
5 1
then I need to put in 2 textbox the max and the min route so in sql this would be
select top 1 route from table where value=(select max(value) from table)
I add a image done in excel, how this would be.
I believe this is so easy but I dont have idea how to get it.
I got using expression, this was extactly expression
="Route "+
Convert.ToString (
Lookup(max(fields!value.Value),fields!value.Value ,fields!route.Value,"mydataset")
)
changing max for min, for the other...
thanks everyone.
I believe the query you're looking for would be:
With Min_Max_CTE as (
Select MIN(value) as Min_Value
, MAX(value) as Max_Value
From Table
)
Select Top 1 'Min' as Type
, T.route
, T.value
From Table T
Inner Join Min_Max_CTE CTE
on T.value = CTE.Min_Value
Union All
Select Top 1 'Max' as Type
, T.route
, T.value
From Table T
Inner Join Min_Max_CTE CTE
on T.value = CTE.Max_Value
Order by Type desc --This will put the Min Route first followed by the Max Route
Then, put that query into a dataset, and then create a tablix and use the Type, route, and value fields to return the minimum route and the maximum route. It should end up being set up just like your excel section with the min and max routes above.
You can do this SSRS by using a couple of separate tables. Your example data:
And two tables in the Designer:
Since the tables only have header rows, only the first row in the table will be displayed.
To make sure we get the MAX and MIN values in the two tables, each table needs to order its Dataset appropriately, i.e. by Value by descending and ascending respectively.
MAX table:
MIN table:
Which gives your expected result:
I need to query in MS Access the difference in value of a column to 8 and only if it is greater than 8.
So if I have a column of numbers 1-10, I want to query the sum of all the value's differences from 8. So the result of the query for the below column would be 3. (9-8)+(10-8)
SELECT Sum(([time1]-8)+([time2]-8)+([time3]-8)+([time4]-8)+([time5]-8)+([time6]-8)+([time7]-8)+([time8]-8)+([time9]-8)+([time10]-8)+([time11]-8)+([time12]-8)+([time13]-8)+([time14]-8)+([time15]-8)+([time16]-8)+([time17]-8)+([time18]-8)+([time19]-8)+([time20]-8)+([time21]-8)+([time22]-8)) AS Total
FROM tblTimeTracking
WHERE (((Month(([Day])))=Month(Now()))) AND ([time1]>8 AND[time2]>8 AND[time3]>8 AND[time4]>8 AND[time5]>8 AND[time6]>8 AND[time7]>8 AND[time8]>8 AND[time9]>8 AND[time10]>8 AND[time11]>8 AND[time12]>8 AND[time13]>8 AND[time14]>8 AND[time15]>8 AND[time16]>8 AND[time17]>8 AND[time18]>8 AND[time19]>8 AND[time20]>8 AND[time21]>8 AND[time22]) ;
Thanks,
How about:
SELECT Sum([Value]-8) As SumOfVal
FROM table
WHERE [Value]>8
Edit re complete change in original question.
It is not clear what you want
SELECT Sum(([time1]-8)+([time2]-8) ...
WHERE [time1]>8 And Time2>8 ...
Time1>8 will exclude nulls, but if that is not what you are doing, you will need to consider:
Nz([time1],0) + ...
Edit re comments
Something like:
SELECT Sum(times) FROM
(SELECT IIf(Time1>8,Time1-8,Time1) As times FROM Table
UNION ALL
SELECT IIf(Time2>8,Time2-8,Time2) As times FROM Table) As b
As b is an alias: Access SQL
UNION / UNION ALL: View a unified result from multiple queries with a union query
I wanna make a query that fetches only the rows that has 'cost' value grader than zero.The cost column has double data type.When i write a query like that,
select cost from xxx where cost>0;
it retrieves the rows only that has value grader than or equal to one.For example it doesnt take like 0.02 or 0.3 values.The query sees these type values as zero.How can i achieve my goal?
Thanks for advance...
I can't replicate your problem using mysql 5.41.
Show us the result of describe table xxx;
What happens if you issue the query:
select cost from xxx where cost > 0.0;
Is your query actually:
select ceil(cost) from xxx where cost > 0.0;
If so, for values of cost > 0 but <= 1, you'd get a result set of 1.