when i try to start the zabbix-server i am getting and run/zabbix/zabbix_server.pid not readable (yet?) error,
ls -al
-rw-rw-r--. 1 zabbix zabbix 5 May 1 15:15 zabbix_server.pid
my zabbix-server config file
#This is a configuration file for Zabbix Server process
# To get more information about Zabbix,
# visit http://www.zabbix.com
############ GENERAL PARAMETERS #################
LogFile=/var/log/zabbix/zabbix_server.log
LogFileSize=0
PidFile=/var/run/zabbix/zabbix_server.pid
#PidFile=/tmp/zabbix_server.pid
DBHost=localhost
DBName=zabbix
DBUser=zabbix
DBPassword=zabbix
DBSocket=/var/lib/mysql/mysql.sock
Please help. suggest me a solution
I've had this issue when building a zabbix 4.0 server. To fix the issue I made sure that the path to the PID file was correct on '/etc/zabbix/zabbix_server.conf' and '/lib/systemd/system/zabbix-server.service'.
Interestingly restarting the service alone did not get rid of the error. I needed to reboot the server and this fixed the problem.
close the selinux on centos7
It works for me.
just close selinux for this time
setenforce 0
Close selinux forever
vi /etc/selinux/config
SELINUX=disabled
That message only indicates that the server failed to start. Check the server log (/var/log/zabbix/zabbix_server.log according to your config file), it will contain a more meaningful error message.
In my case, it was a issue connecting with the database.
Remove current pid file + be sure that no zabbix_server process is running on your machine.
Zabbix server does not accept special chars like: !##$%^&*()_+,./;'[]}{|":?>< in DBPassword variable.
Related
(I have Centos 7 with samba-client.x86_64 4.6.2-8.el7 against windows server 2008 that is in a AD Domain controlled by separate windows server 2008 AD domain controller)
Started with this:
smbclient -W my.domain -U myuser //svr.my.domain/fred mypassword -c list
... which worked great, then decided to move domain,user and password into a file and use -A as described in the smbclient manpage. File windows-credentials, content:
username=myuser
domain=my.domain
password=mypassword
... with command line:
smbclient -A windows-credentials //svr.my.domain/fred -c list
.... did not work, gave error:
SPNEGO(gse_krb5) NEG_TOKEN_INIT failed: NT_STATUS_NO_MEMORY
session setup failed: NT_STATUS_NO_MEMORY
... an hour on the internet suggested lots of people had this trouble and just about each had a different ticked answer, and none of them worked for me. Tried various combinations of their answers - in particular, https://askubuntu.com/questions/1008992/ubuntu-17-10-to-access-windows-files-shares-within-workplace-it, and ended up with...
Created a separate my.smb.conf with just:
[global]
# seems to get rid of
# SPNEGO(gse_krb5) NEG_TOKEN_INIT failed: NT_STATUS_NO_MEMORY
client use spnego = no
# seems to get rid of
# session setup failed: NT_STATUS_NO_MEMORY
client ntlmv2 auth = no
... and used:
smbclient -s my.smb.conf -A windows-credentials //svr.my.domain/fred -c list
... and it looks like it works, but I'm not really sure as there seems to be credentials caching and a complete lack of information on how this stuff works or is supposed to work.
Can anyone actually explain any of this? Even if not, perhaps yet another answer to this problem will help someone somewhere.
This appears to be specific to Windows 2008. Attaching to Windows Server 2016 works without the modified smb.conf file. I have been unable to locate any real details.
In case of problems with smbclient
you can mount smb folder and use it like local folder
mount -t cifs //<ip>/<share folder>$ /mnt -o user=<user>,pass=<password>,domain=<workdomain>
I have a Cpanel Server.
It send emails correctly expect from 1 domain which hosted on the server , so when I try to send email from that domain using roundcube or Horde I got the errror
SMTP Error (451): Failed to add recipient "recipient#exmple.com" (Temporary local problem - please try later).
does anyone know why and how to fix this?
I found the porblem:
After reviewing the file /var/log/exim_mainlog using
tail -f /var/log/exim_mainlog
I noticed that the error was:
2013-05-29 20:04:28 SMTP connection from [127.0.0.1]:36797 (TCP/IP connection count = 1)
2013-05-29 20:04:28 lowest numbered MX record points to local host: domain.com (while verifying <user#domain.com> from host localhost.localdomain (domain.com) [127.0.0.1]:36797)
2013-05-29 20:04:28 H=localhost.localdomain (domain.com) [127.0.0.1]:36797 sender verify defer for <user#domain.com>: lowest numbered MX record points to local host
2013-05-29 20:04:28 H=localhost.localdomain (domain.com) [127.0.0.1]:36797 F=<user#domain.com> A=dovecot_login:narena temporarily rejected RCPT <recipient#exmple.com>: Could not complete sender verify
2013-05-29 20:04:28 SMTP connection from localhost.localdomain (domain.com) [127.0.0.1]:36797 closed by QUIT
so the main problem was:
lowest numbered MX record points to local host
after couple of search I found the soluation in http://forums.cpanel.net/f5/lowest-numbered-mx-record-points-local-host-73563.html
which was to:
login to WHM and go to Main >> DNS Functions >> Edit MX Entry for the domain
set MX priority to 0 for the related domain and save.
I had the same problem after running a script to fix directory permissions on a cPanel-powered server (CentOS 6.5). I checked the logfile (tail -f /var/log/exim_mainlog) and found this error:
require_files: error for /home/user_name/etc/domain.com: Permission denied
Just ran the following command and the issue was fixed:
chown -R user_name:mail /home/user_name/etc/
Hope this helps someone.
check the the file /var/log/exim_mainlog to see more information about the error
tail -f /var/log/exim_mainlog
while trying to send email
Check your MX Entry in Cpanel, if the existing domain priority is less than or equals to 0, set it to 1. Mine is fixed. Hope it will help you.
Wow, after about an hour of searching and meddling with different files, I'd caution any novice not to venture out editing anything before you have a backup or image if your server, as you can cause irrevocable damage to your server. So many people talking garbage about what you should do or test without any real solution.
Anyways, here's what worked for me:
Real problem: Exim was updated to latest version which has loads of bugs like this issue.
How I fixed my server:
Authenticate to Linux via SSH and run the command lines through which we download and install the old version of EXIM.
Command Line 1: wget https://ca1.dynanode.net/exim-4.93-3.el7.x86_64.rpm
Command Line 2: rpm -Uvh --oldpackage exim-4.93-3.el7.x86_64.rpm
Command Line 3: systemctl restart exim
Command Line 4: Systemctl restart clamd
Command Line 5: systemctl restart spamassassin
Optional: just type "Reboot" to restart your server
The command lines above does the following:
Downloads the old package (I'm sure you can google other sources with this file)
Install the old package without prompt
Restart the Exim service
Restart the Clamd Service (AV)
Restart the spamassassin service (Spam Filter)
Restart outlook or whatever you use for mail client and send an email. Mine works, hope yours do too.
I've created this config for redis [/etc/redis/map.conf]:
include /etc/redis/ideal.conf
port 11235
pidfile /var/run/redis-map.pid
logfile /var/log/redis/map.log
dbfilename map.rdb
As you can see, it includes /etc/redis/ideal.conf; this file actually exists and we have read permissions.
Also there is another file, slightly different; consider [/etc/redis/storage.conf]:
include /etc/redis/ideal.conf
pidfile /var/run/redis-storage.pid
port 8000
bind 192.168.0.3
logfile /var/log/redis/storage.log
dbfilename dump_storage.rdb
My problem is: I can launch redis-server with storage.conf (and everything works fine), but map.conf leads to the following error:
Reading the configuration file, at line 1
>>> 'include /etc/redis/ideal.conf'
Bad directive or wrong number of arguments
failed
Version of redis is 2.2.
Where did I go wrong?
Sorry guys.
I was using different instances of Redis.
Instance for storage.conf was launched by /usr/local/bin/redis-server, but map.conf launched by /usr/bin/redis-server; second one is broken.
Thank you anyway.
So I have the following in my monitrc file:
check process apache with pidfile /usr/local/apache/logs/httpd.pid
group apache
start program = "/etc/init.d/httpd start"
stop program = "/etc/init.d/httpd stop"
if failed host XXX port 80 protocol http
and request "/monit/token" then restart
if cpu is greater than 60% for 2 cycles then alert
if cpu 80% for 5 cycles then restart
if totalmem 500 MB for 5 cycles then restart
if children 250 then restart
if loadavg(5min) greater than 10 for 8 cycles then stop
if 3 restarts within 5 cycles then timeout
but I keep getting the error that:
Error: service name conflict, apache already defined '/usr/local/apache/logs/httpd.pid'
If the hostname of the server is 'apache' then the conflict is with the default rule for monitoring the system load.
Monit seems to have the implicit rule of 'check system hostname', where the hostname is the output of hostname command.
You can overwrite that by adding just a line like:
check system newhostname
For example:
check system localhost
I saw this error when I forgot to comment out the line:
include /etc/monit/conf.d/*
in a custom /etc/monit/conf.d/myprogram.conf file, so it was recursively including that file.
By any chance do you have an entry with a host name apache beneath this entry or in a separate monit config file?
You have the same service defined more than once. Check all your monit config files for that service. This includes your monitrc and all files listed under the "Includes" section (like include /etc/monit/conf.d/*).
If you redefine "Includes" within a file in one of your "Includes" directories, you will run into recursive reference problems.
Very very important thing : you need monit 5.5
For example in ubuntu 12.04 available in repo only 5.3
So you need to download and install from other repo.
Solution for me , for example :
wget http://mirrors.kernel.org/ubuntu/pool/universe/m/monit/monit_5.5.1-1_amd64.deb && sudo dpkg -i monit_5.5.1-1_amd64.deb
For my case, I simply had to restart monit to get rid of the service name error:
sudo service monit restart
Check if you have had any conflicts for Apache defined in any of the monit conf files under /etc/monit.d/ directory, I accidentally did added nginx for my puma.conf and ran into the same error before.
Attempting to set up Samba + OpenLDAP using nss_ldap.
After joining Windows7 to Samba stand alone PDC, I can not login with a domain account unless that account is also added to the /etc/passwd file.
I get: user in passdb, but getpwnam() fails!
Everything I've read points to an NSS_LDAP issue yet, getent passwd shows users perfectly fine and I am able to ssh into the same Linux host using a user account that is only in the LDAP database.
Additionally, if I crack open the /etc/passwd file and add a line for the user in question, I can then login.
I'm not using PAM. I added the two Windows7 registry updates required per the Samba.org site.
Software stack is as follows:
Samba 3.5.3
OpenLDAP 2.4.21
nss_ldap 264
Thoughts/suggestions?
--------------------------------- UPDATE ---------------------------------
Getting closer! My nsswitch.conf did have files ldap so I reversed the order (now ldap files) and something odd happen. Notice, before, I said I could login with SSH and getent passwd dumped users in both ldap and files. After making the nsswitch.conf change, ldap before files, simple commands like ls took a long time. Additionally I observed nss_ldap errors as follows:
ls: nss_ldap: could not search LDAP server - Server is unavailable
and
ls: nss_ldap: failed to bind to LDAP server ldap://tsrvr.example.corp: Invalid credentials
I commented out the rootbinddn line in ldap.conf and these errors went away and getent passwd immediately began working again. The order of the output changed also: ldap entries listed before files entries.
Still, though, my Windows7 client will not login to the domain and I continue to get the same Samba error message
User test in passdb, but getpwnam() fails!
In my smb.conf, I tried removing ldapsam:trusted = yes line and when I do, I get domain authentication errors.
I'm not using SSL/TLS with OpenLDAP and I have the SSL = no setting. I also have the ldap.secret file set. I'm running slapd under the root account. My rootbinddn, before commenting out, referenced an LDAP root user of uid=root,ou=Users,dc=example,dc=corp. root's userPassword using CRYPT matches the bindpw as well as the one in /etc/shadow.
Looking at LDAP log activity for when I get the Samba error, it appears as if LDAP is returning the correct result against a Samba query:
Jun 19 14:20:14 tsrvr slapd[3803]: conn=1025 op=15 SRCH base="dc=example,dc=corp" scope=2 deref=0 filter="(&(uid=test)(objectClass=sambaSamAccount))"
Jun 19 14:20:14 tsrvr slapd[3803]: conn=1025 op=15 SRCH attr=uid uidNumber gidNumber homeDirectory sambaPwdLastSet sambaPwdCanChange sambaPwdMustChange sambaLogonTime sambaLogoffTime
sambaKickoffTime cn sn displayName sambaHomeDrive sambaHomePath sambaLogonScript sambaProfilePath description sambaUserWorkstations sambaSID sambaPrimaryGroupSID sambaLMPassword sam
baNTPassword sambaDomainName objectClass sambaAcctFlags sambaMungedDial sambaBadPasswordCount sambaBadPasswordTime sambaPasswordHistory modifyTimestamp sambaLogonHours modifyTimestam
p uidNumber gidNumber homeDirectory loginShell gecos
Jun 19 14:20:14 tsrvr slapd[3803]: conn=1025 op=15 SEARCH RESULT tag=101 err=0 nentries=1 text=
Any other suggestions?
Much appreciated
Sounds like a problem with /etc/nsswitch.conf. Specifically, the passwd and group lines should refer to ldap before compat or file. Have you looked at this Samba wiki entry?
SOLVED!!!!!!!!!!!
I have a script that was starting Samba (NMBD, SMBD) as well as OpenLDAP (SLAPD). It's an RC script that reads configuration data from a file to determine, among other things, which processes are already running or if a dependent process fails to start, etc... Here is a snippet of the relevant part in the script. The last line copies a version of the nsswitch.conf into place that specifies to use LDAP lookups.
while [ $i -lt $MAXPROCS ];
do
PID=${PROC[$i]}
StartProc $PID
if test $? != 0; then
echo "!!! Aborting Any Remaining Start-up Processes !!!"
exit 1
fi
i=$(($i+1))
done
cp /etc/rc.d/pozix/nsswitch.conf.ldap /etc/nsswitch.conf
And upon shutdown I was doing the following; notice I copy a nsswitch.conf file that has "noldap" entries in it.
while [ $i -lt $MAXPROCS ];
do
PID=${PROC[$i]}
StopProc $PID
i=$(($i+1))
done
cp /etc/rc.d/pozix/nsswitch.conf.noldap /etc/nsswitch.conf
It turns out that in the start-up scenario, samba wants the nsswtich.conf content to have the ldap entries there prior to invocation. Here is what I did to fix my issues:
cp /etc/rc.d/pozix/nsswitch.conf.ldap /etc/nsswitch.conf
while [ $i -lt $MAXPROCS ];
do
PID=${PROC[$i]}
StartProc $PID
if test $? != 0; then
cp /etc/rc.d/pozix/nsswitch.conf.noldap /etc/nsswitch.conf
echo "!!! Aborting Any Remaining Start-up Processes !!!"
exit 1
fi
i=$(($i+1))
done
In summary, it appears that how you start SMBD is just as important as when you start it. If you start SMBD when nsswitch.conf has no LDAP entries, you get a version of smbd running linked to nss_ldap.so thinking it should only rely upon /etc/passwd (if that is all that is in the nsswitch.conf file) and changing the nsswitch.conf contents after SMBD is running has no effect.
Hope this helps other system builders....