I have installed ejabberd 16.03 from binary source (ejabberd-16.03-osx-installer.app.zip)
My os is OS X Yosemite
After installation completed I started ejabberd:
cd ejabberd_directory/bin
./ejabberdctl start
I even checked the status to make sure it is started. Then I tried to retrieve the list of available modules:
./ejabberdctl modules_update_specs
and it says ok!
But I get nothing by running this:
./ejabberdctl modules_available
And I cannot install any module.
I would appreciate any help..
Github made some changes and we have to adapt the code to be able to install modules again. You will need ejabberd 16.06 to use this feature.
Workaround:
./ejabberdctl modules_update_specs
this command creates an empty folder ~/.ejabberd_modules/sources
cd ~/.ejabberd_modules/sources
git clone https://github.com/processone/ejabberd-contrib.git
and then you get module list and install them:
./ejabberdctl modules_available
But keep in mind that running ./ejabberdctl modules_update_specs will empty your sources folder and delete the modules.
Related
I've tried dozens of guides on installing mercurial and keyring extensions on Ubuntu and have never been able to get the keyring extension to work. It was a snap under Windows.
I've installed mercurial many different ways. I'm not sure if the install method has anything to do with the keyring, but here are a few of the things I've tried:
sudo apt-get install mercurial
sudo apt install mercurial
pip install mercurial
... and so on.
I even used this method where it compiles mercurial.
All of these methods work for mercurial. It runs. I can do commits, etc. It's keyring and mercurial_keyring installations that are giving me trouble. I installed both of those using pip install. When I do a command like:
hg out http://somerepo
At the moment, I'm getting the following message:
No handlers could be found for logger "keyring.backend"
I feel like there is a concise set of steps to get keyring working, but it's just eluding me. I've made half a dozen attempts on fresh virtual machines and can never get this to work. :(
pip uninstall keyring
The reason is that python has already the library python-keyring installed which conflicts with the one installed with pip. Credits to Python library woes on Ubuntu 18.04 by Kai Koenig
Edit: the story actually did not end there because what it did was to get rid of that error but was not the actual solution. I had to continue with these commands
pip install keyrings.alt
pip install keyring
(yes, I installed it back)
python -c "import keyring.util.platform_; print(keyring.util.platform_.config_root())"
That was taken from keyring docummentation. It turned out that my config folder shown by this command was not created so I did:
mkdir ~/.local/share/python_keyring
vi ~/.local/share/python_keyring/keyringrc.cfg
I had to create the .cfg file as well and put this inside (on my MacOS Mojave!):
[backend]
default-keyring=keyring.backends.OS_X.Keyring
Now everything works fine, no password asked anymore
I'm getting an error while trying to connect raspberry running ubuntu mate to my Google Cloud SQL instance.
These are the step I did to install:
git clone https://github.com/GoogleCloudPlatform/cloudsql-proxy
cd cloudsql-proxy/
sudo sh download_proxy.sh
My instance is configured this way (I deleted some characters in the image and in the code):
I didn't set the network because I'll be using proxy
Then I download into the same folder my JSON key.
wget https://drive.google.com/file/d/my_key.json
And the start the proxy
sudo ./cloud_sql_proxy -instances=be - 21:us-central1:be =tcp:3306 \
-credential_file=./my_key.json &
But I'm getting the error:
pi#pi:~/cloudsql-proxy$ ./cloud_sql_proxy: 1: ./cloud_sql_proxy:
Syntax error: ")" unexpected
I've tried removing the .json and I was getting the same error before without credential, I think that the problem is in the setup.
My dir ls is:
Any help is appreciated :)
download_proxy.sh downloads the proxy compiled for the amd64 architecture of CPU (aka x86_64). Your raspberry Pi has a ARM CPU, so this binary cannot run on your machine.
Google does not provide pre-build ARM versions of the proxy. I don't even know if it is able to build on ARM CPU. If it is possible, this is how you must do it:
Install go, e.g. with apt-get install golang
Setup a GOPATH, as per https://github.com/golang/go/wiki/GOPATH
Run go get github.com/GoogleCloudPlatform/cloudsql-proxy/cmd/cloud_sql_proxy
Run the proxy with $GOPATH/cloud_sql_proxy -instances=...
Ok.
I'm sharing what I did to make it work, as David I don't know what version was I downloading.
I tried to avoid installing Go but it was the only way to get it installed.
sudo apt-get install golang-go
export GOPATH=$HOME/go
go get github.com/GoogleCloudPlatform/cloudsql-proxy/cmd/cloud_sql_proxy
cd $GOPATH/bin
wget your_key.json
sudo ./cloud_sql_proxy -instances=the_full_name_of_the_instance=tcp:3306 -credential_file=./your_key.json &
But I was getting a error because I already have mysql running localy in the same port
So now I'm using a unix soquet
sudo ./cloud_sql_proxy -instances=the_full_name_of_the_instance -credential_file=./your_key.json &
And then it's ready for connections :)
Thanks guys
I found issues with this when compiling SQL-proxy. I did, however, find the instructions here worked great on my raspberry pi 3. Have to make sure to remove all prior installations then reinstall it
wget https://storage.googleapis.com/golang/go1.9.linux-armv6l.tar.gz
sudo tar -C /usr/local -xzf go1.9.linux-armv6l.tar.gz
export PATH=$PATH:/usr/local/go/bin # put into ~/.profile`
I am using CakePHP 3 and MAMP Pro server for my project. When I am trying to bake the cake, this error shows up:
Fatal error: You must enable the intl extension to use CakePHP.
I have even included intl.so and extension=php_intl.dll in my php.ini file but couldn't figure out solution for this error.
this issue was happening to me some days ago. I had installed Ubuntu 18.04 and php 7.1.
I was trying to run the comman php cake.php bake in orden to use cakephp's console but I was getting the following error message:
You must enable the intl extension to use CakePHP.
This extension (intl) was installed for php 7.1 (php7.1-intl) but this message was appearing every time I used php cake.php bake
After some google searches, I saw that I have to install the extension but with the following command:
sudo apt-get install php-intl
The same issue happened with mbstring extension, I used the command:
sudo apt-get install php-mbstring
then I restarted the apache server with:
sudo service apache2 restart
It's difficult to pinpoint exactly what's wrong without seeing your system setup. However based on what was said in the question, you may be setting up the intl extension incorrectly.
First off, if your OS is Linux/macOS and the PHP extension is a shared library (i.e. has a .so extension) then the php.ini entry should be extension=intl.so not extension=php_intl.dll. Also make sure the intl.so file is in the directory configured under the ini entry extension_dir. Otherwise make sure the extension ini entry is fully qualified (e.g. extension=/path/to/extension/dir/intl.so).
If you are using a Linux OS that has a package manager such as Debian/Ubuntu, you may be able to more easily install the extension for the PHP packaged for that distro. For example, in Ubuntu/Debian the package php5-intl provides the intl extension for PHP5 (I assume it's something similar for PHP7 if you've enabled those repos).
If you build PHP from source, you can try bundling the extension into your PHP. See the instructions from the manual.
I faced the same issue.
I added extension="php_intl.dll" in php.ini and restarted the Apache server.
Now it is working.
I had the same issue. After starting from scratch, I did :
$ brew install php
$ composer install && composer update && composer dump-autoload --optimize
$ composer self-update && composer create-project --prefer-dist cakephp/app:^3.8 cms
$ cd cms
$ bin/cake server
And it was working !
I don't have ant in my server. When I do rhc ssh myapp and tried to use ant, it shows "bash: ant: command not found". But I find jars related to ant in my folder "jbossews/lib/catalina-ant.jar".
I tried to install ant by sudo apt-get install ant, but it shows "bash: /usr/bin/sudo: Permission denied"
so I dont know what to do.
Ant functionality is not available on OpenShift at this time. I'm working on clearing up some conflicting articles on our side. Also, root access (sudo) isn't available to users in their gears.
Just use the commands below:
wget https://www.apache.org/dist/ant/binaries/apache-ant-1.9.4-bin.zip
unzip apache-ant-1.9.4-bin.zip
I'm trying to use Ruby with the MySQL that comes with MAMP, but there is a problem with the headers not being installed (or something like that).
Someone referred me to the tutorial copied below but I can't get it to work. When I put in the first line ./configure... it says no such directory.
1) One question in particular is, it says, "copy the MySQL source file (mysql-5.1.37.tar.gz) to somewhere on your hard drive." I don't know if by installing MAMP I have already done this step or not. If not, then I don't know what to do.
2) I also don't know what it means when it says "untar" the source file and "cd"...If MAMP is installed, has it been untarred already?
3) Also, do would I just open the terminal and start this code, or do I have to go into Mysql?
I wonder if anyone can tell me how to adapt it. Here are 2 other pieces of information about my installation that might be helpful.
a). MySQL is set up on port 8889 on my computer.
b) Also when I enter "which mysql" in the command line, it responds with "/usr/local/mysql/bin/mysql."
Please help if you can. Thanks.
Download the latest MAMP dmg file.
Download the 1.8.2 (or whichever the latest one you could find) components file from this page.
Unzip, mount the dmg, then copy the MySQL source file (mysql-5.1.37.tar.gz) to somewhere on your hard drive.
Untar the MySQL source file, and `cd` to the source file directory.
Compile the library:
$ ./configure --with-unix-socket-path=/Applications/MAMP/tmp/mysql/mysql.sock --without-server --prefix=/Applications/MAMP/Library
$ make -j2
Copy the compiled libraries into MAMP:
$ cp libmysql/.libs/*.dylib /Applications/MAMP/Library/lib/mysql
Copy the MYSQL headers into MAMP:
$ mkdir /Applications/MAMP/Library/include
$ cp -R include /Applications/MAMP/Library/include/mysql
Install the Ruby MySQL Gem, on Snow Leopard:
$ sudo env ARCHFLAGS="-arch x86_64" gem install mysql -- --with-mysql-config=/Applications/MAMP/Library/bin/mysql_config
On Leopard:
$ sudo env ARCHFLAGS="-arch i386" gem install mysql -- --with-mysql-config=/Applications/MAMP/Library/bin/mysql_config
Enjoy!
EDIT # 2009-11-23: If you’re still experiencing problems (perhaps with RVM), try adding “/Applications/MAMP/Library/bin/” to your $PATH in “~/.bash_profile”.
You should probably follow the tutorial in this link. It is updated for MAMP 1.9.5 with mysql2. A couple of changes have been made to the new MAMP version.
http://blog.mirotin.net/?p=35
Furthermore the tar file you need can be found at this link. Download the MAMP_components_1.9.5.dmg file.
http://sourceforge.net/projects/mamp/files/mamp/1.9.5/
Finally got through this with this blog post: http://newfangled.me/installing-mamp-and-rails-on-a-mac/
Here's the archived version of that incase it goes offline http://web.archive.org/web/20130728130916/http://newfangled.me/installing-mamp-and-rails-on-a-mac
The other answer's reference 404s for me. http://blog.mirotin.net/?p=35
I'd been struggling with this for a while myself.