Hi all
I want to copy table from mysql to mysql.
Source MYSQL server IP is :172.16.10.50
Destination MYSQL server IP is :172.16.10.152
I used ADO.Net source and Ado.Net Destination.
but at time of execution i faced this error.
[ADO NET Destination [16]] Error: An exception has occurred during
data insertion, the message returned from the provider is: You have an
error in your SQL syntax; check the manual that corresponds to your
MySQL server version for the right syntax to use near '"status",
"status_name", "selectable", "campaign_id", "human_answered",
"categor' at line 1
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The
ProcessInput method on component "ADO NET Destination" (16) failed
with error code 0xC020844B while processing input "ADO NET Destination
Input" (19). The identified component returned an error from the
ProcessInput method. The error is specific to the component, but the
error is fatal and will cause the Data Flow task to stop running.
There may be error messages posted before this with more information
about the failure.
Kindly help me to resolve this issue.
Regards
Neha Prajapati
If you read your error message carefully (or maybe vaguely enough) you can see that the error message states that you have a Syntax Error. What is the query that you are trying to run through SSIS?
Related
I am a complete novice at this so please bear with me.
I have written an SSIS package that takes Excel data, does Data conversion and then inserts into an Iseries table using an ODBC Connection.
When I select Table - row by row as the destination mode, the package works fine, but is extremely slow writing to the iSeries. All records are written. So there is no issue with the Excel data, or the Data Conversions.
However, if I change the ODBC Destination Data Access Mode to Table Name - batch mode the package fails with the following 3 errors:
[ODBC Destination FileName [160]] Error: SQLSTATE: HYC00, Message: [IBM][System i Access ODBC Driver]Driver not capable.;
[ODBC Destination FileName [160]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "ODBC Destination FileName.Inputs[ODBC Destination Input]" failed because error code 0xC020F453 occurred, and the error row disposition on "ODBC Destination FileName.Inputs[ODBC Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "ODBC Destination FileName" (160) failed with error code 0xC0209029 while processing input "ODBC Destination Input" (171). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I cannot work out whether it is a configuration issue within my iSeries ODBC driver configuration or a flag or something within the SSIS that I need to change?
As I say, I'm a complete novice so if you need any additional information please ask, and if I need to do any debugging or tracing, please explain to me how to do this.
I am running Windows 11 and the package and Excel file are on my laptop with a VPN connection to the iSeries.
When I try to create a simple data flow between flat file/OLE DB to ADO.Net Destination I get an error and it fails my package, almost right away.
[ADO NET Destination [2]] Error: An exception has occurred during data insertion, the message returned from the provider is: ERROR [42000] [MySQL][ODBC 5.2(a) Driver][mysqld-5.6.27-log]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '"test_etl2" ("id", "phone", "var1", "var2", "var3", "var4", "var5", "name1", "na' at line 1
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "ADO NET Destination" (2) failed with error code 0xC020844B while processing input "ADO NET Destination Input" (9). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Flat File Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Screenshot
I have a problem...
I have an OLE DB error that occurred in INSERT statement than conflicted with the FOREIGN KEY constraint.
SSIS package eturn this 3 errors:
[OLE_DEST PollOptionUserResult [43]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "The INSERT statement conflicted with the FOREIGN KEY constraint "FK_PollOptionUserResult_PollUserResult". The conflict occurred in database "dw_ismsES", table "ten.PollUserResult", column 'PollUserResultID'.".
[OLE_DEST PollOptionUserResult [43]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "OLE_DEST PollOptionUserResult.Inputs[OLE DB Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "OLE_DEST PollOptionUserResult.Inputs[OLE DB Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE_DEST PollOptionUserResult" (43) failed with error code 0xC0209029 while processing input "OLE DB Destination Input" (56). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
When I try redirect error to my error_table, it internally for some reason take the last one and no the first one I need.
How I can obligate it to take the first one error?
In my case (SSIS 2008), I created an OnError event in the package level, so every error happening in the package would be logged, regardless of where they happened. When I take this approach, all 3 errors should be logged in my error table. I.e.
Please try this approach and see what you get.
I am trying to implement a Lookup Transformation in SSIS 2014 to load "no match output" into "SQL Server Destination", but I got errors at runtime:
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Test dataflow" (58) failed with error code 0xC02020C7 while processing input "SQL Server Destination Input" (74). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
As source task the "OLE DB Source" is used.
The Lookup Transformation uses the no cache mode.
In "SQL Server Destination"-Task: "Table lock" and "Check constraints" are checked and the timeout is set to 30.
What am I doing wrong? Could please someone help to solve this error?
Per my knowledge you cannot use SQL Server Destination while loading data, coming from Lookup Transformation.
You need to use OLE DB Destination.
This is my first SSIS package and I have followed some tutorials and everything looked good until I ran it. I am trying to sync the data from a SQL Server 2008 database to a MySQL database (only 1 table with 2 columns). After running the package I get the following error.
[ADO NET Destination [16]] Error: An exception has occurred during
data insertion, the message returned from the provider is: You have an
error in your SQL syntax; check the manual that corresponds to your
MySQL server version for the right syntax to use near '"UPC", "Model")
VALUES (p1, p2)' at line 1
And on the next line
[SSIS.Pipeline]
Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED.
The ProcessInput method on component "ADO NET Destination" (16) failed with error code 0xC020844B while processing input "ADO NET Destination Input" (19).
The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
My questions are:
Why I am getting this error ?
How to solve it ?
Check the MSDN link about problems with ADO.NET and MySQL:
http://blogs.msdn.com/b/mattm/archive/2009/01/07/writing-to-a-mysql-database-from-ssis.aspx
From the MSDN document:
Note, I recommend using the ODBC Driver when writing to the MySQL database, because the MySQL .NET Connector has an additional blocking issue. If you try it out, you’ll get an error which looks something like this:
Error: 2009-01-05 12:03:47.79
Code: 0xC020844B
Source: Data Flow Task 1 Destination - Query [28]
Description: An exception has occurred during data insertion,
the message returned from the provider is:
You have an error in your SQL syntax; check the manual that corresponds
to your MySQL server version for the right syntax to use near
'"name", "date", "type", "remark")
VALUES (p1, p2, p3, p4), (p1,p2,p3,p4), (p1,p2' at line 1
End Error
Note that the “VALUES” portion has parameter names, and not the actual values. This appears to be an issue with the value the MySQL provider returns for its ParameterMarkerFormat. I did find a bug that was opened against them, but it looks like they decided not to fix it. I’ve heard that the DevArt dotConnect drivers do not have this problem, but I haven’t been able to try them out myself.